Voxx Accessories HPA201 User Manual
Unpack
R
Make sure you have the following items in your 808 EarCanz
Fly package:
• 808 EarCanz Fly Bluetooth earbuds
• USB charging adapter
• Eartips in 3 sizes (1 size installed)
• Ear fins (installed)
If you have any questions about this product, visit
808Audio.com or call our toll-free help line at
1-800-732-6866.
1. Charge the EarCanz Fly
For best performance, we recommend you charge your
EarCanz Fly earbuds fully before using them.
R
Right earbud
(side)
Open the DC IN flap on the side
of the controls below the right
earbud.
Plug the included USB charging
adapter into the charging jack
behind the DC IN flap.
Plug the other end of the adapter
into a USB power source (like a
computer or a USB charger).
The indicator light on the front
of the controls turns red while
the earbuds are charging. It turns
blue when the earbuds are fully
charged.
2. Turn on the EarCanz Fly 3. Pair + Connect
:45PM
R
Unplug the USB charging adapter
when the earbuds are charged.
Right earbud
(side)
To turn on the EarCanz Fly and start
pairing to your Bluetooth device:
Press and hold the
button on the
controls for about 6 seconds (until
the indicator on the controls starts
blinking rapidly).
To turn on your EarCanz Fly
regularly: Press and hold the
button on the controls for 1–2
seconds. The indicator on the controls
starts blinking slowly.
To turn the EarCanz Fly o: Press and hold the button on the controls
for 3 seconds.
The earbuds beep when the process is complete. The indicator
on the controls turns solid blue.
Wi-Fi
Wi-Fi Settings
Bluetooth
Bluetooth Settings
VPN Settings
8
Enable Bluetooth on your smartphone or
other device.
Choose 808 EarCanz Fly from the pairing
options on your smartphone. (If it’s not in
the list, choose “Scan” from your phone’s
Bluetooth menu.)
IMPORTANT: If you’ ve previously paired your phone or other Bluetooth
device with these earbuds, the earbuds will automatically attempt to
reconnect to that device when you turn them on. If you want to pair to
a new device, turn the earbuds o. Then press and hold the button on
the controls for about 6 seconds (until the indicator on the controls starts
blinking rapidly) to put the earbuds in pairing mode. Once the indicator on
the controls starts blinking, go to step 3 to pair and connect.
Note: The process of enabling Bluetooth and connecting varies from device
to device. See your device’s owners manual for more information and
specific instructions.
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is turned on.
• The earbuds’ Bluetooth wireless connection works up to a range of roughly
33 feet (10 meters). This range may vary, however, based on other factors,
such as room layout, wall material, obstacles, your device’s Bluetooth
performance, etc. If you’re having problems connecting to the earbuds,
move closer to your phone.
• Make sure your device supports audio transfer A2DP.
• If your device asks you for a password to connect, use “0000”.
To pair the EarCanz Fly again
After turning your earbuds back on, they automatically
attempt to reconnect to the last connected device. If the
last connected device is not available, the earbuds will enter
pairing mode and be ready to pair to a new or dierent device.
Using the EarCanz Fly
Putting the EarCanz Fly in your ears
The EarCanz Fly earbuds come with medium-sized eartips and
ear fins installed. You can use dierent-sized tips, but first try
them with the medium size.
Find the L and R markings on the
buds—place the cord behind your
neck with the L bud on the left and
R bud on the right.
Place each eartip in your ear as
shown here. The fin should go in
the small ridge just above your ear
canal on your outer ear—it might go
automatically, or you might need to
move it into place.
If the tips don’t fit (or you want to use the earbuds without
fins), follow the directions in the next section to change them.
Changing the eartips
1. Remove the eartip from each earbud.
2. If you want to use the earbuds without fins, remove the
ear fin from each earbud. Otherwise, keep them on.
3. Find the size of tips you want. Place each tip on each bud.
Listening to music
Set your device’s volume for music to 50%.
:45PM
8
Now playing
Media volume
Note: This is to make sure the sound from the
earbuds isn’t too loud when you start streaming.
Start playing music or other audio on your
device. Within seconds, the earbuds start
streaming the audio wirelessly via Bluetooth.
Controlling playback and volume
The control panel near the right earbud lets you
control music playback and volume wirelessly.
To play/pause music: Press the
To adjust volume: Press the or button.
To go to the previous/next song: Press and
hold the
or button.
button.
Answering/ending phone calls
The earbuds’ control panel has a built-in microphone, so you
can use the EarCanz Fly for phone calls. Your phone will ring
through the earbuds when you’re receiving a call. You can
answer and end the call wirelessly from the control panel.
button.
To answer or end a phone call: Press the
To decline a phone call: Press and hold the
second.
IMPORTANT: Not all phones support playback control and phone answer/
end control. Check your phone’s user manual for more information if you’re
having trouble with these functions.
button for 1
WIR ELESS E A R B UDS
quick start guide
HPA201 QSG 01
Loading...