Voxx Accessories HPA190 User Manual
Let’s get started!
Carrier 12:00 PM
Performer BT Wired: Listen right away!
Performer BT Wireless
808 Performer BT headphones give you two ways to enjoy
your own personal concert: wirelessly and wired. This guide
shows you how to get both set up.
Unpack
Make sure you have the following items in your 808
Performer BT package:
• 808 Performer BT headphones
• Cloth audio cable with inline mic and controls
• USB charging cable
If you have any questions about this product, visit
808Audio.com or call our toll-free help line at
1-800-732-6866.
1
Left
headphone
(bottom)
2
Plug in the
headphones
Plug the included audio cable into
the jack on the bottom of the left
headphone.
Connect to your phone
Plug the other end into the headphone
jack on your phone.
The audio cord provides inline push-to-talk
and play/pause control for select mobile
phones and other electronics.
Here’s how it works:
To play/pause music: Single click.
To skip to the next song: Quick double click.
To go back to the previous song: Quick triple click.
To answer/end a call: Single click.
Please note that not all functions work with all brands
and models of phones. Each phone’s user interface works
dierently—see the user manual that came with your
phone for more information.
1
Charge up the headphones
Before you start using your headphones wirelessly, you
need to charge their built-in battery.
Plug the included USB charging
cable into the charging jack on the
bottom of the right headphone.
Right
headphone
(bottom)
Charging Charged
Plug the other end of the charging
cable into a USB power source (like
a computer or a USB charger).
The charging/pairing indicator next
to the charging jack turns red while
the headphones are charging. It
turns blue when the headphones
are fully charged.
2
Turn on the headphones
Unplug the USB charging cable when
the headphones are charged.
Right headphone
(bottom)
Right headphone
(bottom)
IMPORTANT: If you’ve previously paired your phone or other Bluetooth
device with these headphones, the headphones will automatically
attempt to reconnect to that device when you turn them on. If you want
to pair to a new device, give a short double-press to the
bottom of the left headphone to enter pairing mode. The indicator light
begins flashing quickly and the headphones say “Pairing”—this means
you’re in pairing mode.
Instructions continue on the other side...
Press and hold the
bottom of the right headphone for 3
seconds to turn the headphones on.
The headphones beep and the pairing/
charging indicator next to the charging
port begins blinking rapidly.
button on the
button on the
Performer BT Wireless (continued)
Using Performer BT Wirelessly
3
Pair + Connect
8:45PM
Wi-Fi
Wi-Fi Settings
Bluetooth
Bluetooth Settings
VPN Settings
Bluetooth devices
Headset
Computer
808 Performer
8:45PM
Enable Bluetooth on your smartphone
or other device.
Choose 808 Performer from the
pairing options on your smartphone.
(If it’s not in the list, choose “Scan”
from your phone’s Bluetooth menu.)
The headphones beep when the process is complete.
The pairing indicator on the right headphone turns solid
blue.
Note: The process of enabling Bluetooth and connecting varies
from device to device. See your device’s owners manual for more
information and specific instructions.
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is turned on.
• Make sure there’s nothing plugged into the jack on the bottom of the right
headphone when you’re trying to use Bluetooth.
• The headphone’s Bluetooth wireless connection works up to a range
of roughly 33 feet (10 meters). This range may vary, however, based on
other factors, such as room layout, wall material, obstacles, your device’s
Bluetooth performance, etc. If you’re having problems connecting to the
headphones, move closer to your phone.
• Make sure your device supports audio transfer A2DP.
• If your device asks you for a password to connect, use “0000”.
To pair the headphones again
After turning your headphones back on, they automatically
attempt to reconnect to the last connected device. If the last
connected device is not available, the headphones will enter
pairing mode and be ready to pair to a new or dierent device.
Listening to music
Set your device’s volume for music to 50%.
Note: This is to make sure the sound from the
headphones isn’t too loud when you start streaming.
Start playing music or other audio on your
device. Within seconds, the headphones start
streaming the audio wirelessly via Bluetooth.
Note: Bluetooth playback is disabled when something
is connected to the jack on the bottom of the left
headphone. To use Bluetooth, make sure nothing’s
plugged in to this jack.
Now playing
Media volume
Now playing
8:45PM
8:45PM
Controlling playback and volume
The side of the right headphone has a control
panel that lets you control music playback and
volume wirelessly.
To play/pause music: Press the 808 logo on
the right headphone.
Right headphone (side)
To adjust volume: Press the (above the 808)
or (below the 808) on the right headphone.
To go to the previous/next song: Press and hold the or
on the right headphone.
Answering/ending phone calls
These headphones have a built-in microphone, so you can
use them for phone calls. Your phone will ring through the
headphones when you’re receiving a call. You can answer
and end the call wirelessly from your headphones using the
controls on the left headphone.
For best results during phone calls, use the cable with inline mic. In most
cases, this cable’s microphone will provide better performance than the
headphones’ built-in mic.
To answer or end a phone call: Press the 808 logo on the
right headphone.
IMPORTANT: Not all phones support playback control and phone answer/
end control. Check your phone’s user manual for more information if you’re
having trouble with these functions.
PE RF ORMERB T
quick start
guide
HPA190 QSG 01
Loading...