Voxx Accessories AWSHRT2 User Manual
Instructions en français ..................9
Instrucciones en español ..............17
AWSHRT2 QSG 01
portable
wireless speaker
WITH LED CANDLE
QUICK START GUIDE
2
Make sure the following items came in this package:
• Portable Wireless Speaker with LED Candle
• USB Charging Cable
Unpack
1
Charge the speaker
2
Before you start using the speaker for the first
time, it’s a good idea to charge it completely.
To charge the speaker: Open the rubber door
covering the jacks on the back of the speaker.
Plug the included USB cable into the DC IN jack
behind this door.
Plug the other end of the USB charging cable
into a power source, like a computer or a USB
charging adapter.
The charging indicator is red while the speaker
is charging. It turns green when the speaker is
fully charged.
Note: You can use the speaker while it’s
charging.
Speaker back
Cable
Speaker
3
Wi-Fi
Bluetooth
Bluetooth Settings
VPN Settings
Wi-Fi Settings
Press and hold the button on back of the
speaker to turn it on.
The pairing indicator light blinks blue, slowly
at first, then more rapidly. This means the
speaker is ready to pair with your phone or
other Bluetooth device.
Turn the speaker on
3
Speaker back
Enable Bluetooth on your smartphone or other
device.
Make sure the pairing indicator is blinking
rapidly. (If it isn’t, give a quick double press
to the
button. The speaker gives an audio
signal.)
Pair and connect
4
4
Note: If you’ve previously paired a different Bluetooth device with this speaker, the
speaker will automatically attempt to reconnect to that device when you switch
the speaker on. If you want to pair to a new device, double-press the
button on
the speaker—the speaker gives an audio signal.
Headset
AR Heartland
Computer
8:45PM
Bluetooth devices
Choose AR HEARTLAND from the pairing options on
your smartphone. (If it’s not in the list, choose “Scan”
from your phone’s Bluetooth menu.)
The speaker gives an audio signal when it’s finished
pairing and connecting to your smartphone. The
SPEAKER POWER/PAIR indicator turns solid blue.
Note: The process of enabling Bluetooth and
connecting varies from device to device. See your
device’s owners manual for more information and
specific instructions.
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is turned on.
• Make sure there’s nothing plugged into the speaker’s AUX IN jack when you’re
trying to use Bluetooth.
• The Bluetooth wireless connection works up to a range of roughly 33 feet (10
meters). This range may vary, however, based on other factors, such as room
layout, wall material, obstacles, your device’s Bluetooth performance, etc. If
you’re having problems connecting to the speaker, move closer to it.
• If your device asks you for a password to connect, use “0000”.
5
8:45PM
Start playing music on your device
5
Set your device’s volume for music to 50%.
Note: This is to make sure the sound from
the speaker isn’t too loud when you start
streaming.
Start playing music or other audio on your
device. Within seconds, the speaker starts
streaming the audio wirelessly via Bluetooth.
To adjust the volume of your audio: Use the
volume controls on your phone.
TIP: If you’re playing music via Bluetooth, a
quick single-press on the speaker’s button
will pause/play.
6
Adding speakers (stereo mode)
If you have a second AWSHRT2 wireless speaker, you can use it together with this
one in stereo mode. To use 2 AWSHRT2 speakers together in stereo mode:
Speaker back
1. Turn on both speakers. (Press and hold the
button on the back of each.)
2. Make sure both speakers are in pairing mode
(not connected to your phone via Bluetooth). The
Bluetooth indicator should be flashing blue on
both speakers. If it isn’t, give a quick double press
to the
button on the back of each speaker to
put them in pairing mode.
3. Once the Bluetooth indicator is flashing blue on
both speakers, give a quick triple press to the
button on the back of each speaker to put them
in stereo mode. The Bluetooth indicator starts
flashing white on both speakers.
4. The speakers announce “le+ connected” and “right connected” when they’re
ready to play in stereo.
Once the speakers are connected with each other, the le+ speaker will try
to pair to your phone (its Bluetooth indicator will blink fast). Find the AR
HEARTLAND in your phone’s Bluetooth menu and connect to it. Once the
speakers are connected to your phone, the right speaker’s Bluetooth indicator
will go solid white. The le+’s Bluetooth indicator goes solid blue. Keep your
phone close to the le+ speaker—that’s the one it’s connected to!
7
Using the AUX input
Use a mini-jack audio cable (not included) to connect
the audio output from your device to the AUX IN
audio input on the speaker’s back panel (open
the rubber door to access the jack). The speaker
automatically switches to the AUX IN audio. The
pairing idicator turns white.
To listen to Bluetooth audio again, unplug the cable
from the speaker’s AUX IN jack.
Using the Light Modes
This Wireless Speaker offers six built-in light modes
you can use with or without the speaker playing.
4NĈSTQMĈNMNȽĈAMCĈACITRSĈSGDĈ,%$ĈKHFGSHMF
Press the CANDLE LIGHT button on the back of
the speaker. The first press turns lighting on. Press
CANDLE LIGHT repeatedly to go through the light
modes.
Speaker back
Speaker back
8
Tour of the wireless speaker
CANDLE LIGHT button cycles through the
speaker’s light modes.
AUX IN jack lets you connect directly to the
speaker to listen to an audio source.
DC IN jack connects to the USB charging cable
provided to power or charge the speaker.
button turns the speaker on and off (press
and hold), initiates pairing with a Bluetooth device (double press), or initiates
reconnection with a previously paired device (single press). It also functions as a
play/pause button when Bluetooth audio is playing. If you have 2 AWSHRT2 speakers,
this button pairs them to work in stereo (triple press).
Charging indicator is red when the speaker is charging and turns solid green when
the speaker is charged. This indicator flashes red when the battery needs to be
recharged.
Pairing indicator shows the connection status of the speaker:
• fast blinking blue means the speaker is trying to pair with a device
• slow blinking blue means the speaker is trying to reconnect to a paired device
• solid blue means the speaker is paired with a device and ready to play audio
• solid white—(single speaker) an audio cable is plugged into the Aux In jack or
(stereo speakers) the right speaker is linked for stereo sound
• slow blinking white—two speakers are trying to link for stereo sound.
• fast blinking white (le+ speaker only) means this speaker is ready to pair via
Bluetooth
Speaker back
Charging
indicator
Pairing
indicator
Loading...