Voxx Accessories ARAP50A User Manual

user manual

guide de l’utilisateur

manual de usuario

ARAP50

Product registration

Thank you for purchasing an Acoustic Research product. We pride ourselves on the quality and reliability of all our electronic products but if you ever need service or have a question, our customer service staff stands ready to help. Contact us at www.acoustic-research.com. PURCHASE REGISTRATION: Registering On-line will allow us to contact you in the unlikely event a safety notification is required under the Federal Consumer Safety Act. Register Online

at: WWW.ACOUSTIC-RESEARCH.COM. Click on Product Registration and Fill Out the Brief Questionnaire.

Enregistrement du produit

Merci d’avoir acheté un produit Acoustic Research. Nous sommes fiers de la qualité et de la fiabilité de tous nos produits électroniques, mais en cas de nécessité de réparation ou pour toute question, le personnel de notre service clientèle est prêt à vous aider. Contactez-nous sur www.acoustic-research.com. ENREGISTREMENT D’ACHAT: Enregistrer votre produit en ligne nous permettra de communiquer avec vous pour tout avis de sécurité au sujet du produit en vertu du Federal Consumer Safety Act (Loi fédérale de protection du consommateur). Enregistrez votre

produit en ligne sur: WWW.ACOUSTIC-RESEARCH.COM. Cliquez sur Enregistrement produit et remplissez le court questionnaire.

Enregisregistro del productotrement du produit

Gracias por comprar un producto Acoustic Research. Nos enorgullece la calidad y fiabilidad de todos nuestros productos electrónicos, pero si alguna vez necesita servicios técnicos o si tiene alguna pregunta, nuestro personal de atención al cliente está a su disposición para ayudarle. Comuníquese con nosotros en www.acoustic-research. com. REGISTRO DE COMPRA: El registro en línea nos permitirá comunicarnos con usted en el caso de tener que enviarle algún aviso de seguridad en virtud de la Ley Federal de Seguridad del Consumidor. Registre el producto

en línea en: WWW.ACOUSTIC-RESEARCH.COM. Haga clic en Registro del producto y responda al cuestionario.

It is important to read this user manual prior to using your new product for the first time.

Important safety instructions

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ AND SAVE FOR FUTURE REFERENCE

Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use.

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,

]

Portable Cart Warning

such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

ADDITIONAL SAFETY INFORMATION

• The AC/DC adaptor supplied with this product is intended to be correctly oriented in a vertical or floor mount position.

• Do not use unauthorized chargers or power adapters. Use only chargers that came with your product or that is listed in the user’s guide.

• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

• Always leave sufficient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet that may prevent air flow through vent openings.

• Do not place lighted candles, cigarettes, cigars, etc. on the product.

• Care should be taken so that objects do not fall into the product.

• Do not attempt to disassemble the cabinet. This product does not contain customer serviceable components.

• The marking information is located at the bottom of apparatus.

• To be completely disconnect the power input, the AC/DC adaptor of apparatus shall be disconnected from the mains.

• AC/DC adaptor is a disconnect device. The AC/DC adaptor should not be obstructed OR should be easily accessed during intended use.

• The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.

• No naked flame sources such as lighted candled should be placed on the apparatus.

• The use of apparatus in moderate climates.

FCC Information

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

Changes or modifications not expressly approved by Audiovox could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

Industry Canada Regulatory Information

This device complies with Industry Canada license-exempt RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

The user is cautioned that this device should be used only as specified within this manual to meet RF exposure requirements. Use of this device in a manner inconsistent with this manual could lead to excessive RF exposure condition.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Manufacturer/Responsible Party Audiovox Accessories Corporation 111 Congressional Blvd., Suite 350 Carmel, IN 46032

1-317-810-4880 ( No technical /product support is available via this number. This phone number is for regulatory matters only.)

Visit www.acoustic-research.com for technical support

Acoustic Research

ARAP50

FCC ID: VIX-ARAP50A IC: 342H-ARAP50A

RF Exposure Warning

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Electrical power information

AC/DC adaptor: Input: 100 - 240 V AC, 50 / 60 Hz Output: 18 V DC, 2.5 A

Acoustic Research is a registered trademark of Audiovox Electronics Corporation.

“Made for iPod”, “Made for iPhone” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

Please note that the use of this accessory with iPod, iPhone or iPad may affect wireless performance.

Apple, the Apple logo, AirPlay, the AirPlay logo, iPhone, iPod touch and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries. iPad is a trademark of Apple Inc.

Content purchased from the iTunes Store is for personal lawful use only. Don't steal music.

Contents

Important safety instructions

IMPORTANT SAFETY INSTRUCTIONS ......................1

FCC Information

FCC Information .............................................................2

RF Exposure Warning ...................................................2

Industry Canada Regulatory Information ...........2

Electrical power information ....................................3

Contents .......................................................4

Before you begin

Plugging in for power ..................................................5

List of compatible iTunes host devices for

AirPlay ...............................................................................5

General Controls

Front view ........................................................................6

Back view ..........................................................................6

Top view............................................................................6

LED indications ..............................................................7

Connecting to WiFi network

Using the Acoustic Research AR Connect App ..7 Setting the network parameters manually (Setup

on PC or Mac) .................................................................8

Music playback and charging

Streaming Audio from your device .......................10

Streaming audio from your iTunes library ..........10

Playback on AirPlay Audio Systems ......................10

USB Digital Audio Playback .......................................11

Music playback controls .............................................11

Charging your device ..................................................11

Firmware update ...........................................................11

Troubleshooting ........................................12

Warranty information ..............................13

Before you begin

Congratulations on purchasing your Acoustic Research Advanced Audio System with AirPlay! This product can provide you hours of music enjoyment by allowing you to wirelessly stream audio content from your iPad, iPhone or iPod touch installed with iOS 4.3.3 (or later) or a WiFi enabled computer installed with iTunes 10.2.2 (or later). No longer do you need to have your device tethered to your audio system. You can roam around the house or office while texting, or gaming, or using some other functions of your device, while still listening to the great music played back through your ARAP50. You can also play and charge your devices through the USB port. Not all Apple devices support the play and charge function of the USB port.

Content of the box

• Main unit

• AC/DC Adaptor

Additional requirements

• Broadband Internet service

• Broadband (cable/DSL) modem, usually supplied by your Internet service provider

• An 802.11 b or g (WiFi) wireless home network

For WiFi connections, you may also need:

• Your wireless network’s SSID

• Your access password (for secure networks)

Plugging in for power

Connect the supplied power adapter to the ARAP50's DC jack, and connect the other end to a convenient wall outlet. The three LED indicators on the front of the unit will flash once indicating successful connection.

List of compatible iTunes host devices for AirPlay

Your ARAP50 is compatible with:

• a WiFi enabled PC/Mac installed with iTunes

10.2.2 (or later); and

• the following iPad, iPhone or iPod touch models installed with iOS 4.3.3 (or later):

• iPad 2

• iPad

• iPhone 4S

• iPhone 4

• iPhone 3GS

• iPod touch (3rd, and 4th generation)

Not all Apple devices support the play and charge function of the USB port.

Before you try to connect the ARAP50 to your network and use it with your iPad, iPhone, iPod touch, or computer with iTunes, make sure you’re using the latest iOS version on your device (or iTunes version on your PC or Mac). AirPlay has version requirements for iOS and iTunes in order to run:

• Device requirements iOS 4.3.3 or later

• Computer requirements PC or Mac running iTunes 10.2.2 or later

If your device or computer do not satisfy these requirements, AirPlay will not work.

Only use the power adapter which is included with your product.

General Controls

Front view

Audio system

Network indicator – Indicates the Network Status (Solid Green for Network Connected. Flashing red for Network Not Connected) AirPlay indicator – Indicates the unit is in AirPlay mode (Solid Blue when streaming audio from your device. Off when audio streaming stops) or in USB playback mode (Solid Green) Power indicator– Indicates the ON/OFF/STANDBY status: (Solid Blue for ON. Solid Red for STANDBY. Flashing in alternating blue and red when the unit is powering up.)

Note: A full list of LED indications is listed on the next page.

Back view

Set Up – Enter Set Up mode USB – Connect Apple devices or charge your tablet devices or cell phones. See Music playback and

charging section for more information.

Line Out – Audio line out DC 18V –

Connect to the power adapter

Top view

Source – Toggle between AirPlay mode and USB mode Reverse – Skip to the previous track Play/Pause – Start/pause playback Forward – Skip to the next track Volume Power

/ – Adjust volume level

– Press to turn on the unit. Press to enter Standby mode. Press and hold to turn off the unit.

LED indications

Status Network connected Network disconnected In Network setup mode In AirPlay mode

(when streaming) In USB playback mode When the unit is on In Standby mode Powering up

Network indicator

Solid green

Flashing red

Flashing green

Connecting to WiFi network

AirPlay indicator

Solid blue

Solid green

Power indicator

Solid blue

Solid red

Flashing in alternating

blue and red

To connect the ARAP50 to your existing home WiFi network, you need to apply your home WiFi setting to the unit. There are three ways to do this:

1. Using the Acoustic Research AR Connect App – If you are using an iPad, iPhone, or iPod touch, using the App would be a simple approach to set up the ARAP50.

2. Sharing settings from your iPad, iPhone, or iPod touch with iOS 5 installed – If your iPad, iPhone, or iPod touch has iOS5 or later installed, using WiFi setup sharing will be the quickest method to set up the ARAP50.

3. Setting the network parameters manually – If you are using PC or Mac or you wish to configure advanced network settings, you should use this method to setup up the ARAP50.

Using the Acoustic Research AR Connect App

1. Use the sync cable that came with your iPad, iPhone, or iPod touch to connect your device to the USB port on the back of the ARAP50.

2. Once you connect, your device will prompt you to download an App to use with the ARAP50. Select OK to continue.

3. Enter your iTunes password to download and install the App on your device.

4. Once the App has finished installing on your device, the AR Connect icon appears on your device’s home screen. Select this

icon to launch the App. This App allows you to enjoy easy network set up, update firmware and give a name to the ARAP50 which will appear in the list of choices when streaming audio. See the Quick Start Guide for more information on using the App.

• The App is for iPad 2, iPad, iPhone 4S, iPhone 4, iPhone 3GS, iPod touch include 2nd, 3rd , 4th generation only (iOS 4.2 or later).

• If you accidentally dismiss the alert that comes up when you connect your device to the ARAP50, go to the App store and search for “AR Connect” to  nd the App.

• You are encouraged to download and install this App in order to enjoy easy network set up and firmware updates.

• Make sure the device you connect to the ARAP50 is in your WiFi network and connected to the Internet.

• Keep your device connected to the ARAP50 USB port while you run the AR Connect setup App. The App will tell you when it’s safe to disconnect.

Sharing WiFi settings from your iPad, iPhone, or iPod touch

If your device has iOS 5 or later installed, you might be able to use WiFi setup sharing to setup the ARAP50.

1. Connect your iPad, iPhone, or iPod touch to the USB port on the ARAP50 with USB sync Cable.

2. When the ARAP50 is powered, press the Set Up button on the back of the ARAP50 (next to the USB port).

3. The screen of your iPad, iPhone, or iPod touch will show the following prompt: Share WiFi Settings? Select "Allow" to proceed with WiFi setup sharing. The ARAP50 will restart.

4. Wait for the Network indicator on the front of the ARAP50 to turn green. You are now connected. If after going through the setup process the Network indicator is flashing red, the ARAP50 has not properly connected to your WiFi network. Please repeat the setup process or see Troubleshooting for more info.

Setting the network parameters manually (Setup on PC or Mac)

Enter Set Up mode

1. Press Power to turn on the unit. The Power indicator will be flashing in alternating blue and red.

2. After successful boot-up, the Power indicator will turn to solid blue. Press and hold the Set Up button on the back of the ARAP50 for three seconds to enter Set Up mode. ARAP50 will restart. Wait until the Network indicator on the unit begins to flash green. If the Network indicator flashes red continually, press Power to turn off the unit and try again from step 1.

Connect to your audio system with WiFi

1. Enter the list for selecting wireless network on your PC or Mac. Alternatively, select Settings>WiFi on your iPad, iPhone, or iPod touch.

Make sure your iPad, iPhone, or iPod touch is installed with the iOS 4.3.3 (or later) or iTunes 10.2.2 (or later). Refer to the List of compatible iTunes host devices for AirPlay in the Before you Begin section for details.

2. The audio system will appear as ARAP50 setup XXXXXX. (the “XXXXXX” are numbers that uniquely identify the particular unit you have). Select ARAP50 setup XXXXXX from the list of available networks.

ARAP50 setup 010434

If ARAP50 setup XXXXXX is not in the list, refresh and scan the available WiFi networks again.

Launch and follow Set Up steps in your web browser

1. Once your device has been successfully connected to the ARAP50 setup XXXXXX wirelessly from your list of available WiFi networks, launch Safari browser or any other Internet browser on your PC, Mac, iPad, iPhone, iPod Touch.

2. Type in 192.168.10.1 at the browser address bar and confirm. The configuration web page of ARAP50 will be displayed.

3. Select Wireless Set Up on the left hand column.

4. If you wish to change the default name of ARAP50, enter the name you'd like to give the ARAP50 in the box of Name your Audio System and then click Apply.

http://192.168.10.1

5. Select Network Name (SSID) and select your

existing home WiFi network. Then enter your passphrase or security key.

6. You may select Advanced Settings to display

the hidden settings and set the parameter manually.

7. Select OK when prompted.

8. ARAP50 will restart. Wait until the Network

indicator on the unit turns to solid green. If the Network indicator flashes red continually, Repeat the above steps again.

You need to know your Wireless Network’s name (SSID) and if your wireless network has security enabled, you will also need to know your wireless network password (sometimes called passphrase or key). You can find this information on your broadband modem, router or access point’s administration set up page or manual. You may also call your Internet Service Provider (ISP) if you do not know how to access the administration page in order to find this information. They usually have a 1-800 number available. Once you have the below information you may write it down for future reference.

About password:

• Do not get your Network Password confused with your Windows or Mac system logon password since they can be di erent.

• Some wireless access point or routers may call the Wireless Network Password a passphrase or key. These terms are the same.

Music playback and charging

Streaming Audio from your device

1. Open a music App on your iPad, iPhone, or iPod touch and start playing music.

2. Click on the on-screen AirPlay icon. A list of choices in your network appears, including ARAP50 XXXXXX or the name that you gave the ARAP50. Select it from the list.

ARAP50 010434

You can only stream audio to one device at a time from your iPhone, iPad, iPod touch. Multiple devices are allowed when streaming from iTunes on the PC or Mac.

3. Select a music file and start playback. After a few seconds, you should hear music from ARAP50. The AirPlay indicator on the front of the ARAP50 should be turned to solid blue when streaming begins.

Playback on AirPlay Audio Systems

If you are streaming music from your PC or Mac, you can play music on multiple audio systems, including your PC or Mac.

1. Open iTunes on your PC or Mac. Select the AirPlay icon in the lower right of the screen.

2. Select Multiple Speakers from the AirPlay list.

ARAP50 010434

3. Tick the speakers you want to playback and adjust the volume level as desired. After a while, you should hear music from the audio system(s) you selected.

Streaming audio from your iTunes library

1. Open iTunes on your PC or Mac.

2. Click on the AirPlay icon in the lower right of the screen. A list of options available in your network appears.

3. Select ARAP50 XXXXXX or the name that you gave the ARAP50 from the list.

ARAP50 010434

4. Select a music file and start playback. After a while, you should hear music from ARAP50. The AirPlay indicator on the front of the ARAP50 should be turned to solid blue.

ARAP50 010434

You may use the buttons on the ARAP50 to control playback of iTunes.

1. Open Preference in iTunes, and select Devices.

2. Tick Allow iTunes control from remote speakers.

Your iPad Your iPad

USB Digital Audio Playback

1. Connect your iPad, iPhone, or iPod touch to

the USB jack at the back of the unit.

Not all Apple devices support the play and charge function of the USB port.

2. Press SOURCE to switch to USB mode. The AirPlay indicator on the front of the ARAP50 should turn to solid green.

3. Start playback from your device.

4. Select the AirPlay icon.

5. Select Dock connector from the AirPlay list. You should hear music from ARAP50.

Music playback controls

• Press to start/pause playback.

• Press Reverse to skip to the previous track.

• Press Forward to skip to the next track.

• Press Volume

• Press Source to switch audio sources.

/ to adjust volume level.

Charging your device

1. Connect your iPad, iPhone, or iPod touch to the USB jack at the back of the unit.

Not all Apple devices support the play and charge function of the USB port.

2. Your device should start charging.

Firmware update

From time to time it is recommended that you check for new versions of firmware. Firmware upgrades may enhance the experience when using the ARAP50 or provide fixes to future bugs. You may also need a firmware upgrade if you experience a firmware error (signaled by the power light with a red light blinking rapidly for an extended period).

Using the Acoustic Research AR Connect App

Download the free Acoustic Research AR Connect App (search for “AR Connect” to find the App) from the iTunes store on your iPad, iPhone, or iPod touch. This App enables firmware updates on the ARAP50. Connect your iPad, iPhone, or iPod touch to the ARAP50 via the sync cable.

Make sure you have turned on the unit. Select Firmware Update from the App. It will initiate the unit to start updating the firmware. Follow the on-screen instructions to complete the update.

• Once the firmware update process has started, any playback will be paused, and the unit will not respond to any buttons you press.

• Never disconnect the power for ARAP50 when update is in process.

Using the Web Tool

You may need to use the Web Tool to update firmware on the ARAP50 if you do not have an iPad, iPhone, or iPod touch available, or if your network requires advanced network settings during the setup process. Visit http://www.acoustic-research.com/ search/?sku=ARAP50 for more information on using the Web Tool.

Troubleshooting

The ARAP50 doesn’t turn on. / No indicator lights.

• Make sure the power outlet you’re using isn’t switched (like a lamp outlet).

• Plug the AC power adapter securely into the ARAP50 and a wall outlet.

• Check the power outlet by plugging in another device.

The ARAP50 won’t connect to my home WiFi network.

• Make sure your WiFi network is working. Try using a different device with this network to make sure its working.

• Make sure your access point is turned on.

• Make sure the wireless enabler is securely and correctly connected.

• Make sure a firewall is not blocking any outgoing ports.

• If your network uses a password, double check that you entered this password correctly in the AR Connect setup.

• Make sure the access point does not restrict connections to specific MAC addresses.

• Your wireless Internet connection may exceed the maximum range for reception. Relocate the unit closer to the wireless access point.

• The network settings of the ARAP50 may be incorrect. Check the network settings.

• Move the ARAP50 closer to your wireless router and try connecting again.

• Unplug your device from the USB port on the back of the ARAP50. Then press the Power button on top of the ARAP50 to turn it off and unplug the unit from the AC outlet. Then try the setup procedure described in this Quick Start Guide again.

I can’t select the ARAP50 from the list of available AirPlay devices.

• Make sure you’re using the latest iOS version

on your device (or iTunes version on your PC or Mac). AirPlay has version requirements for iOS and iTunes in order to run. Your ARAP50 is compatible with a WiFi enabled PC or Mac installed with iTunes 10.2.2 (or later); and the following iPad, iPhone, or iPod touch models installed with iOS 4.3.3 (or later):

• iPad 2

• iPad

• iPhone 4S

• iPhone 4

• iPhone 3GS

• iPod touch (3rd, and 4th generation)

• Make sure the ARAP50 is on the same WiFi network as your audio source device (your iPad, iPhone, iPod touch, or computer using iTunes).

I’m playing music on my device/computer, but there’s no sound from the ARAP50.

• It may take the ARAP50 a few seconds to start playing music via AirPlay. This is normal. It allows AirPlay to establish a buffer before streaming so that playback is seamless.

• Make sure the volume on the ARAP50 is up. Press the VOL up button.

• Make sure your audio source is turned up.

• Make sure there isn’t another device connected to the ARAP50.

• Restart iTunes or your device. Then try connecting to the ARAP50 again.

The AirPlay icon doesn’t appear in my music App.

• Make sure the Network indicator on the ARAP50 front panel is green. Then fully close and restart the App.

Intermittent audio.

• The bandwidth of your wireless LAN may be too low. Move the ARAP50 closer to the access point and make sure that there are no obstacles between them.

+ 29 hidden pages

Voxx Accessories ARAP50A User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual