Voxx caRS, ca4B5, ca4B5E Owner’s Guide
PROFESSIONAL
SERIES
Owner’s Guide
For Models:
caRS
&
ca4B5
ca4B5E
Deluxe Vehicle Remote Start
and Keyless Entry System
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is
applicable to most vehicles. However, due to the conguration of some vehicles, some functions AND/OR
SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.
12020 Voxx Electronics Corporation. All rights reserved.
Table of Contents
Using Your Remote Control .................................................................... 3
Using the Keyless Entry .................................................................... 3
Two Stage Door Unlock (optional) .....................................................3
Activating Trunk Release (optional) ...................................................3
Activating AUX 1 (optional) ................................................................3
Using the Progressive Car Finder Feature ........................................ 3
Using the Personal Protection Alarm .................................................3
Programmed Transmitter Notication ................................................4
Valet Mode ........................................................................................4
User Selectable Notication Chirps ................................................... 4
User Selectable LED ......................................................................... 4
Basic Security (Optional Programming Feature) ................................. 5
Arming the Security System .............................................................. 5
Hidden Alarm Function ......................................................................5
Disarming the Security System ......................................................... 5
Manually Overriding the Security System ......................................... 5
Using Your Remote Vehicle Starter .......................................................6
Remote Start Ready Mode ................................................................ 6
Cancelling Remote Start Ready Mode .............................................. 6
Remote Starting Your Vehicle ............................................................7
Remote Start Shutdown .................................................................... 7
Entering Your Vehicle while it is Running via Remote Start ..............7
Enter & Exiting the Vehicle - Remote Start Ready Mode ..................7
Using the “Quick-Stop” Feature ......................................................... 8
Preheating or Precooling the Vehicle’s Interior .................................8
User Programmable Run Time / Run Time Extension ....................... 9
Operating the Daily Start Timer .........................................................9
Temperature Start Mode .................................................................... 9
Remote Start Safety Features ......................................................... 10
Status LED, Light Flashes and Siren/Horn Indications ..................... 11
Remote Control Buttons & Functions ................................................. 12
Replacing Remote Control Batteries ................................................... 13
Warranty Information ............................................................................14
2 caRS/ca4B5 4280841 Owners revB
Using Your Remote Control
Using the Keyless Entry
The button is used to lock the vehicle’s doors, the button is used to unlock the
vehicle’s doors. To lock or unlock the doors simply press and release the desired
function button one time. For your convenience, the parking lights will ash once when
the doors are unlocked and twice when the door are locked.
NOTE: The system is equipped with a feature called Silent Choice. If enabled, the
system requires a second press of the or button to activate an audible locking/
unlocking response from the vehicle. If your system is set up for 2 step unlock, a third
press of unlock will activate the audible response.
Two Stage Door Unlock (Optional)
If this feature is enabled on your system, pressing the button one time will unlock
only the driver’s door. Press again within three seconds to unlock the remaining
doors.
Activating the Trunk Release Feature (Optional)
If this feature is enabled on your system, pressing and holding the button for 3
seconds will open the vehicle’s trunk or hatch.
Activating the AUX 1 Output (Optional)
If this feature is enabled on your system, pressing the and buttons
simultaneously will activate an optional feature. This feature can be programmed for a
wide range of functions like power window or sunroof automation, please consult your
installing dealer to determine the functionality of your system.
Using the Progressive Car Finder Feature
Press the button to locate your vehicle. The system will ash the parking lights
and sound 5 times at low volume, increasing in volume each time the button is
pressed.
Using the Personal Protection Alarm (Panic)
Press and hold the button for 3 seconds to activate the personal protection alarm.
During panic mode, the normal function of the transmitter buttons will be suspended.
The transmitter’s and buttons can be used to lock and unlock the door (if the
option is installed). To stop the alarm, press and hold the button on the transmitter
again for 3 seconds. The system will automatically stop after 30 seconds.
32020 Voxx Electronics Corporation. All rights reserved.
Programmed Transmitter Notication
As a security precaution each time the vehicle’s ignition is turn on the status LED
light with ash the number of transmitters programmed into the system. This helps
to identify unauthorized transmitters from accessing your vehicle. If you believe an
unauthorized transmitter has been programmed to your system, contact your installing
dealer for assistance.
Valet Mode
When valet mode is activated the status LED will light solid, and all security and
remote start functions will be disabled. To enter or exit valet mode simply follow the
steps outlined below:
1. Turn the vehicle’s ignition ON.
2. Push and hold the programming/valet button.
3. The LED will turn on solid when valet mode is active
4. Release the programming/valet button.
User Selectable Notication Chirps
System ARM/DISARM chirps can be toggled ON or OFF without entering the
programming feature banks.
1. Turn the ignition ON then OFF.
2. Press and release the valet/programming button 3 times. The system
will respond with 1 chirp for ON or 2 chirps for OFF.
User Selectable LED
This feature will control whether the LED is ON or OFF when the system is Armed/
Locked and can be toggled ON or OFF without entering the programming feature
banks.
1. Turn the ignition ON, OFF, ON, OFF.
2. Press and release the valet/programming button 3 times. The system
will respond with 1 chirp for ON or 2 chirps for OFF.
4 caRS/ca4B5 4280841 Owners revB
Basic Security (Optional Programming Feature)
The basic security feature of the system will monitor the vehicle’s doors and ignition
circuit and will sound the alarm in the event of unauthorized entry. Note that this
feature is defaulted OFF and must be turned on in feature programming. This feature
may also require additional parts and or labor at the time of installation.
Arming the Security System
To arm the system, exit the vehicle, close all doors, then press the button. The
parking lights will ash 2 times, indicating the system is armed, has locked the doors
(if equipped and connected) and activated the starter disable feature. The LED status
indicator will blink steadily, once per second.
NOTE: The system is equipped with a feature called Silent Choice. If enabled, the
system requires a second press of the button to activate an audible arming
response from the vehicle.
Hidden Alarm Function
Press the button rst, within 3 seconds press the button to activate the hidden
alarm function. The security system will arm with “Hidden Alarm Function” in which the
siren / horn will be silenced if the system is triggered.
Disarming the Security System
To disarm the system press the button. The parking lights will ash 1 time,
indicating the system is disarmed and has unlocked the doors (if equipped and
connected).
NOTE: The system is equipped with a feature called Silent Choice. If enabled, the
system requires a second press of the button to activate an audible disarming
response from the vehicle. If your system is set up for 2 step unlock, a third press of
unlock will activate the audible response.
Manually Overriding the Security System
Your system can be disarmed without the use of the transmitter. This is necessary,
since you will need the ability to operate your vehicle if the transmitter is lost or its
battery fails. To by-pass the alarm system;
1. Open the vehicle door. The alarm will sound.
2. Turn the ignition key to the ON position.
3. Within 10 seconds, press and release the valet push button switch.
The alarm system will stop sounding and enter the (by-passed) mode. You can now
start and operate the vehicle normally.
52020 Voxx Electronics Corporation. All rights reserved.
Loading...