VOXOA BTUNESQ5 Users Manual
BTunes for Bose QC25
User’s manual
Content
■ Before use…………………………………………………...…1
1. Overview ....................…………………………………...…….1
2. Charging the BTunes…………………………………………….2
■ Getting started…………………….……………………………2
1. Powering on/off the BTunes............................................................2
2. Installation..................... ..............................................................3
3. Pairing /Connecting....................................................................3
1)Pairing the BTunes with Bluetooth cellphone.........……………3
2)Pairingthe BTunes with Bluetooth transmitter.............................4
3)Pairing the BTunes with multi-point devices.............................5
4. Battery display …………..…………………………………….5
5. Making a call..........................................……………………….6
6. Playing music..............................................................................8
7. LED indicator..............................................................................9
8. Factory reset..............................................................................10
■ Care and maintenance………….………………………………10
■ FAQs…………………………………..……………………….11
■ Specifications……………………...………………………......12
Thank you for choosing the BTunes for Bose QC25. Please read this user’s
manual carefully before use.
■ Before use
BTunes for Bose QC25 supports streaming CD quality music from your smart
devices, and make phone calls too.
1. Overview
1
2.5mm audio input jack
5
MFB Button
2
Microphone
6
LED indicator
3
USB charging jack
7
Volume down
4
Volume up
1
2. Charging the BTunes
When the BTunes need to be charged, it will emits “Battery low” and the red
LEDflashes instead of blue LED. Pleaserecharge the battery of the BTunes.
1) Plug the USB charging cable into the charging jack of a PC or a charger.
2) Plug the end of USB charging cable into the USB port on the BTunes.
RED light on→Charging
RED light off→Finished charging
3)It will take about 1.5 hours to finish charging.
Warning:
The battery is recyclable.
Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat, such as sunshine, fire or the like.
■ Getting started
1. Powering on/off the BTunes
Function
Operation
LED indicator
Prompt tone
Power on
Press and hold MFB
button for 2 seconds
Blue LED on
Power on
Power off
Press and hold MFB
button for 3
seconds
Red LED on
Power off
2
Remarks:
◆ The headset will prompt“Battery high”,“Battery medium”, “Battery low”
according to the status of battery.
◆ The BTunes will power off automatically to save power if not connected
with devices within limited time.
2. Installation.
1) Plug the BTunes into BOSE QC25 on the left side.
2) Wear the headset according to L/R side.
3. Pairing /Connecting
1) Pairing the BTunes with Bluetooth cellphone
Prior to using the BTunes for the first time, you have to pair it with a
Bluetooth-enabled cellphone.
The general pairing procedures are as follows:
1) Place the BTunes and Bluetooth cellphone within 1 meter;
2) Press and hold MFB button about 7s and release it till red and blue LED
flash alternately, voice prompt “Pairing”.
3) Select “The BTunes QC25/5” from Bluetooth list on your cellphone to
pair/connect. After connected, the Blue LED flash twice every 4s and
prompt “Your device is connected”.
3
Loading...