Voxmio Vox622 User Manual

VOX622

Bluetooth stereo headset

User’s manual

Contents

Brief introduction…………...…………………………..…....1

Before use……………………………………………………..1

1. Overview…………………………………………………...……1

2. Charging for headset..……………………………………………2

Getting started……..…………………………………………3

1. Turning on/off the headset…………....……………………......3

2. Wearing the headset.......................................................................3

3. Pairing/connecting

…….……..............................……………..….4

1) Pairing headset with Bluetooth cell phone via Bluetooth……..….4

2) Pairing headset with Bluetooth cell phone via NFC......................5

3) Pairing headset with multi devices via Bluetooth ….............…....6

4. Making a call with the headset………………………………...….6

5. Playing music………………………………………………..…...9

6. LED indicator

………………………………………………....10

7. Factory Reset………………………………………………..….10

Care and maintenance……………………………..………..10

FAQs……………………………………...…………………..11

Specification……………………………...………………..…12

Welcome to use this Bluetooth stereo headset, VOX622. Please read this
user’s manual carefully before use.

Brief introduction

VOX622 is an In-ear Bluetooth stereo headset. Mini and portable design for
easy taking. You can use it to enjoy wireless music and make a call at the
same time. Besides, VOX622 support NFC technology for close pairing and
connecting.

Before use

1.

Overview

1

1 Cover of charging jack 6 NFC area

2 Micro USB charging jack 7 LED indicator

3 + :volume up/previous song 8 Microphone

4 : Multi-functions button 9 Big/middle/small eartips

5 —: volume down/next song 10 Stabilizer

2. Charging for headset

The headset comes with a built-in rechargeable battery, prior to using it, it is
recommended to charge the battery fully for the first time.
When the headset is low power, the headset emits prompt tones every 5

minutes and the red LED flashes. Please recharge the battery of the headset.

The way of charging as following:

Using USB cable

1. Turn on the cover of charging jack, and plug the USB charging cable

2. Plug another side of cable to the USB port of PC

Red light on: Charging
Red light off: Finis

h charging

3. It will takes about 2 hours to finish charging

Remarks:

1) The battery is recyclable.

2) Batteries (battery pack or batteries installed) shall not be exposed to

excessive heat place, such as sunshine, fire or the like.

2

Getting started

1. Turning on/off the headset
Functions Operation Prompt tone

Turning on Press and hold about 4

seconds until blue LED flashes

Four raise tone

Turning off Press and hold about 4

seconds until red LED flashes

Four fall tone

Remark: In order to save power, the headset will turn off automatically if
no devices can be connected after 5 minutes.

2. Wearing the headset

a. Put the stabilizer into the headset and rotate to the suitable position as
following shown:

3