VOV Heating VHS-3002F Instruction Manual

EN

HEATING

HEATER

Model: VHS-3002F

Instruction manual

FEATURES

1. REAR HOUSING

2. FRONT HOUSING

3. ROTARY SWITCH

4. PILOT LAMP

5. THERMOSTAT

6. HANDLE

IMPORTANT SAFEGUARDS

Thank you for buying our product. Please attentively read this before operating the machine. Keep this
operation manual for future reference.

1. Use the heater on flat surfaces not tiling or upsides down.

No use underneath socket directly.

2. Do not use your heater in the presence of explosive or flammable substance.

3. It is absolutely necessary ensure the following:

- The socket is not used to the heater and other high power electrical appliance at a time.

- The cord is rated at least 10Amps.

- Tight connection between plug and socket so as to avoid the overheating plug and malfunction.

- Unplug heaters by grasping plug and pulling it from the socket. Never yank on cord.

- Carefully use when no supervision.

- Our factory, if damaged manufactures the power cord and plug for changing.

- Caution: Do not drape anything on your heater when in use.

OPERATING INSTRUCTIONS

1. Plug into any 230~50Hz, AC source.

2. Your heater is equipped with a 4-position rotary switch

SYMBOL FUNCTION

0 OFF
* BLOW COOLING AIR
I HALF HEAT OUTPUT
II FULL HEAT OUTPUT

3. Set the rotary switch to maximum for fast warm up of a room. Once the room is comfortable, select a

lower setting to reduce electrical consumption and to prevent the room from becoming too warm.

4. Adjust the thermostat to maximum and select the desired power setting. Once the room is comfortable,

rotate the thermostat counter clockwise, until the heater shuts off. The thermostat will now maintain the
temperature by cycling the heater on or off. During particularly cold weather, the low power setting may
be insufficient to satisfy the thermostat. Select a higher setting for these periods.

5. Before switching off and better work for 5-10 second in cool condition.

SAFETY CONTROL

To avoid damage and danger by overheating, your heater is fitted with super protector that switch as off the
heater in the event of overheating until the temperature drops to some extent.

MAINTENANCE

1. When your heater needs cleaning, wipe exterior surfaces of the heater with a moistened cloth. Not rinse

with water directly. Be sure to unplug before cleaning.

2. To prolong the heater life, not disassemble it personally when malfunction occurs. Send your heater to

relative identification after-sold service center or provider for the convenience inspecting.

SPECIFICATIONS

Power supply: 230V~50Hz
Power regulation range: 1000/2000W
Suitable area: 15-20m²

According to Waste of Electrical and Electronic Equipment (WEEE) directive, WEEE should be
separately collected and treated. If at any time in future you need to dispose of this product please do
NOT dispose of this product with household waste. Please send this product to WEEE collecting
points where available.

SK

HEATING

VENTILÁTOROVÝ RADIÁTOR

Model: VHS-3002F

Návod na použitie