Voscom VOS-8800FDMT, VOS-8800FDST, VOS-8800FDST-4, VOS-8800FDST-6, VOS-8800FDMR Installation Manual

...
VOS-8800FDT/R series 8-Channel Video + 8 Duplex Audio Transmission
Installation Manual
Fiber Optic Transmission Systems
VOSCOM TECHNOLOGIES CO.,LIMITED
WWW.VOSCOM.COM
TM
Important Safety Instructions
EN_1
1. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
5. Do not use this apparatus near water. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the points where they exit from the apparatus.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases shall be placed on the apparatus.
15. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
16. Installation should be done only by qualified personnel and conform to all local codes.
20. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Website:www.voscom.com
Product Overview
En_2
The VOS-8800FDT/R can transmission 8-Channel video and 8 duplex analog auido over singlemode or multimode optical cable. Stand-alone or rack-mount. The cards can be inserted into our 14 slots,19inch 4U or 6U rack-mountable card cage (VOS-CH04 or VOS-CH06). The card of this model require two slots widths.
System Diagram:
Model Number
Transmitter Receiver
Fiber Mode Wavelengths
Optical Power Budget
Maximum Transmission Distance
Multi-Mode 1310nm/1550nmVOS-8800FDMRVOS-8800FDMT
The Optical Power Budget data fit Mulit-mode(62.5/125 m),Single-Mode(9/125 m).
When using 50/125 m multimode fiber, subtract 3 dB from the optical power budget.
Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors,
splices and patch panels.
Maximum transmission distance is also limited by fiber bandwidth.
Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables.Power
adapter included (for standalone) US, European, UK or Australian power plug.
Please feel free to consult factory for any special requirement and customization
Note:
10dB
1.2km
Single-Mode
VOS-8800FDSRVOS-8800FDST 12dB 20km
Models and Optical Power Budget:
•24-Bit Digitally Encoded Audio over one fiber
•Multi-mode Fiber Support for Distances up to 1.2 km
•Single-Mode Fiber Support for Distances up to 100 km
•No EMI or RFI and no ground loops
•Stand alone or rack-mount
Features:
Video
88
1310nm/1550nm
Single-Mode
VOS-8800FDSR-4VOS-8800FDST-4 18dB 40km
1310nm/1550nm
Single-Mode
VOS-8800FDSR-6VOS-8800FDST-6 25dB 60km
1310nm/1550nm
Audio
88
1 Fiber optic Cable
Monitor
VOS-8800FDT Transmitter
VOS-8800FDR Receiver
8 x Video
8 x Video
8 x Duplex Audio
8 x Duplex Audio
. . . . .
. . . . .
8 x Microphone
8 x Microphone
8 x Speaker
8 x Speaker
. . . .
8 x Fixed Camera
Panel & Cable Connection
En_3
NOTE1: Digital video optic transmitter and receiver should be used in pairs, one is Transmitter (LED is red), the other is Receiver (LED is green).
FTX
REAR PANEL
DC5V
1
7
1
1 2 3
Fiber Optic Connector, FC/PC or ST/PC
V1~V8 BNC Connector, 75-ohm analog video input (Transmitter)/output (Receiver)
Audio Connector, RJ-45 Connector, duplex analog audio1 & audio2 input /output.
FRONT PANEL
LAN1 /EXT1
DATA
AUDIO1 /EXT2
AUDIO2 /EXT3
LAN2 /EXT4
3 4 5 6
None
1
4 5 6
Audio Connector, RJ-45 Connector, duplex analog audio3 & audio4 input /output.
Audio Connector, RJ-45 Connector, duplex analog audio5 & audio6 input /output.
Audio Connector, RJ-45 Connector, duplex analog audio7 & audio8 input /output.
V1 V2 V3 V4
2
V5 V6 V7 V8
1
7
Stand-alone Power supply Connector, DC5V 3A Input.
Panel & Cable Connection
En_4
RJ-45 interface specification
Website:www.voscom.com
Panel & Cable Connection
En_5
Transmitter (Audio): 8-Channel Duplex Audio Connection (Input/Output)
NOTE: AUDIO SIGNAL AND IMPEDANCE MODE
1) Audio Signal: The audio is Mono Audio in default, can support Stereo audio, but you
should consult for us before the order.
2) Impedance Mode: The audio is unbalanced mode in default, can support 600 ohm balanced audio, but you should consult for us before the order
Connect Audio1 (Backward) Connect GND1 (Backward)
1 2 3 4 5 6 7 8
Connect GND1 (Forward)
PIN
Connect Audio2 (Forward)
Connect Audio2 (Backward) Connect GND2 (Backward)
Connect Audio1 (Forward) Connect GND2 (Forward)
Input Input
Output Output
Transmitter RJ-45LAN1/EXT1 : Audio1 & Aduio2 input/output
Website:www.voscom.com
LAN1/EXT1
Input Input
Output
Output
Connect Audio3 (Backward) Connect GND3 (Backward)
1 2 3 4 5 6 7 8
Connect GND3 (Forward)
PIN
Connect Audio4 (Forward)
Connect Audio4 (Backward) Connect GND4 (Backward)
Connect Audio3 (Forward) Connect GND4 (Forward)
Input Input
Output Output
Transmitter AUDIO1 RJ-45/EXT2 : Audio3 & Audio4 input/output
AUDIO1/EXT2
Input Input
Output
Output
Loading...
+ 11 hidden pages