Vortex86DX VDX-6354, VDX-6354-PLUS User Manual
VDX-6354 / VDX-6354-PLUS
DM&P Vortex86DX 800MHz
PC/104 CPU Module
with 4S/2USB/VGA/ LCD/AUDIO/ LAN/GPIO 256MB DDR2
Onboard
User’s Manual
(Revision 1.1A)
Copyright
The information in this manua l is subject to cha nge without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may be contained in this document. And makes no commitment to update or to
keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part ,
in any form or by any means without the prior written permission of the manufacturer.
Copyright 2008.
Manual No. IUM6354000-01 Ver.1.0A
December, 2008
Manual No. IUM6354000-01 Ver.1.1A
February, 2009
Trademarks Acknowledgment
Vortex86DX is the registered trademark of the manufacturer.
Other brand names or product names appearing in this document are the properties
and registered trademarks of their respective owners. All names mentioned herewith
are served for identification purpose only.
T a b l e o f C o n t e n t s
T a b l e o f C o n t e n t s.............................................................iii
C h a p t e r 1 Introduction……………………………………………1
1.1 Packing List............................................................1
1.2 Product Description................................................1
1.3 Specifications.........................................................3
1.4 Board Dimension....................................................5
C h a p t e r 2 Installation……………………………………………..5
2.1 Board Outline.........................................................6
2.2 Connectors & Jumpers Location............................7
2.3 Connectors & Jumpers Summary...........................9
2.4 Pin Assignments & Jumper Settings......................11
2.5 System Mapping...................................................22
2.6 Watchdog Timer...................................................25
2.7 GPIO....................................................................26
2.8 SPI flash...............................................................27
2.9 PWM....................................................................28
3.0 IDE to SD.............................................................29
C h a p t e r 3 Driver Installation……………………………………30
Appendix ………………………………………………………………..31
A. TFT Flat Panel Data Output ......................................31
B. TFT Flat Panel Support List.......................................32
C. LVDS Flat Panel Support List....................................33
D. Flat Panel Hardware Setting.....................................34
E. Flat Panel Wiring and Lighting..................................35
F. TCP/IP library for DOS real mode..............................36
G. BIOS Default Setting.................................................37
Warranty............................................................................................38
This page is blank
Vortex86DX-6354 Vortex86DX PC/104 CPU Module
1
C h a p t e r 1
Introduction
1.1 Packing List
Product Name Package
VDX-6354
&
VDX-6354-PLUS
Embedded Vortex86DX CPU All-in-One Board
Manual & Drivers CD x 1
RS232 cable x 4
PRINTER cable x1
IDE cable x 1
USB cable x 1 (USB port x 2)
VGA cable x 1
LAN cable x 1
GPIO cable x 1
AUDIO Line x2
PS/2 Mouse cable x 1
PS/2 Keyboard cable x 1
Screw Kit x 1
Vortex86DX-6354 Vortex86DX PC/104 CPU Module
2
1.2 Product Description
The VDX-6354 family of low-power x86 embedded controller is designed to meet PC/104
specification, and integrated with the following features.
800 MHz Vortex86DX SoC
VGA, TFT/ LVDS LCD support up to
1280x1024 resolution
256 / 512MB DDR2 system memory
Enhanced IDE (UltraDMA-100/66/33)
10/100Mbps Ethernet
2 USB 2.0 (host)
Up to 4 serial ports
Parallel port
16-bit GPIOs
Audio
Onboard 4MB SPI Flash
PC/104-Plus expansion bus
Meet PC/104 stacking spec.
2 watchdog timer
16~24 PWM channels
JTAG interface
AMI BIOS
Single voltage +5V DC
Support extended operating
temperature range of -20°C to +70°C
The VDX-6354 PC/104 family of embedded controller is designed with backward compatibility in
mind, to provide migration path for projects facing end-of-life challenges with their existing x86
based PC/104 controller. The VDX-6354 family of controller is designed as a plug in
replacement, with backward compatibility to support legacy software to help extend existing
product life cycle without heavy re-engineering.
VDX-6354 is suitable for broad range of data-acquisition, Industrial automation, Process control,
Automotive controller, AVL, Intelligent Vehicle management devic,Medical device, Human
machine interface, Robotics, machinery control And more…application that required small
footprint, low-power and low-cost hardware with open industry standard such as PC/104.
Vortex86DX-6354 Vortex86DX PC/104 CPU Module
3
1.3 Specifications
Features VDX-6354
CPU
DM&P SoC CPU Vortex86DX- 800MHz
Real Time Clock with Lithium Battery Backup
Cache
L1:16K I-Cache, 16K D-Cach e L2:128KB Cache
BIOS
AMI BIOS
Bus Interface
PC/104 Standard Compliant (Optio nal: PCI-104)
System Memory
256 / 512MB DDR2 Onboard
Watchdog Timer
Software programmable fr om 30.5 us to 512 seconds x2
sets(Watchdog 1 fully compatible with M6117D)
VGA
XGI Volari Z9s Chipset
VGA and TFT Flat Panel Interface Support
LVDS Flat Panel Interface Support (Optional)
Onboard 32MB VGA Memory
Support resolution up to 1280 x 1024,16MB color s
LAN
Integrated 10/100M Et hernet
AUDIO
CM119 USB Audio controller
I /O Interface
Enhanced IDE port (UltraDMA -100/66/33) x1
RS-232 port x3
RS-232/485/422 port x1 (RS485: Auto Direction)
Parallel port x1
USB port x2 (USB 2.0 version)
16-bit GPIO port x1
10/100Mbps Ethernet port x1
Connectors
2.00 mm 44-pin box header for IDE x1
2.00 mm 44-pin box header for LCD x 1
2.00 mm 10-pin box header for VGA x1
2.00 mm 10-pin box header for USB x1
2.00 mm 26-pin box header for Printer x1
2.00 mm 20-pin box header for 16-bit GPIO x1
2.00 mm 10-pin box header for RS-232 x4
2.00 mm 8-pin header f or Ethernet x 1
2.54 mm 5-pin box header for Keyboard x1
2.54 mm 5-pin header for Mouse x1
2.54 mm 4-pin header for DC-in x1
2.54 mm 3-pin header for RS-485 x1
2.54 mm 2-pin header for Reset x1
2.54 mm 7-pin header for Redundancy x1(Opt)
2.54 mm 2-pin header for SYS-Fail-SW- x1( Opt)
1.25 mm 6-pin Wafer for JTAG x1
1.25 mm 4-pin Wafer for Line-out/MIC-in x2
Vortex86DX-6354 Vortex86DX PC/104 CPU Module
4
Flash Disk Support
Onboard 4MB SPI Flash Disk (Driver : A)
44-pin IDE Flash Disk( EmbedDisk 16MB or above)
44-pin IDE to Micro SD (Optional)
Power Requirement
Single Voltage +5V @740mA
Dimension
90 X 96mm (3.54 x 3.77 inch es)
Weight
90g
Operating
Temperature
-20oC ~ +70oC
-40°C ~ +85°C (Optional)
Vortex86DX-6354 Vortex86DX PC/104 CPU Module
5
1.4 Board Dimension
Vortex86DX-6354 Vortex86DX PC/104 CPU Module
6
C h a p t e r 2
Installation
2.1 Board Outline
(Note1: PCI-104 connector is optional)
(Note2: Redundancy Signal and System-Fail-SW are optional)
(Note3: COM2 RS232/422/485 is selected by BIOS setting)
Vortex86DX-6354 Vortex86DX PC/104 CPU Module
7
2.2 Connectors & Jumpers Location
Connectors
Vortex86DX-6354 Vortex86DX PC/104 CPU Module
8
Jumpers & LEDs
Vortex86DX-6354 Vortex86DX PC/104 CPU Module
9
2.3 Connectors & Jumpers Summary
Summary Table
Nbr Description Type of Connections Pin nbrs.
J1 IDE Box Header, 2.0 ,22x2 44-pin
J2 USB Box Header,2.0 , 5x 2 10-pin
J4 LAN Pin Header, 2.0 , 4x2 8-pin
J5 JTAG Wafer, 1.25 , 6x1 6-pin
J6 Reset Pin Header, 2,54,1x2 2-pin
J7 Redundancy (Optional) Pin Header, 2.54, 7x1 7-pin
J8 System –Fail-Switch (Optional)
Pin Header, 2.54 , 2x1 2-pin
J9 PS/2 Keyboard Pin Header, 2,54,1x5 5-pin
J10 PS/2 Mouse Pin Header, 2,54,1x5 5-pin
J11 COM1(TTL/GPIO-P4 / PWMx8)
Box Header, 2.0 5x2 10-pin
J12
COM2(RS232/RS485/RS422)
Box Header, 2.0 5x2 10-pin
J13 GPIO ( Port 0 / 1 /PWMx16) Box Header, 2.0 ,10x2 20-pin
J15 RS-485 (Auto direction) Molex Header,2.54, 3x1 3-pin
J16 Power Connector Terminal Block 5.0,2x1 2-pin
J17 COM3 Box Header, 2.0 5x2 10-pin
J18 PRINT Box Header, 2.0 , 13x2 26-pin
J19 COM4 Box Header, 2.0 5x2 10-pin
J20 PC104 Connector – 64 pin Box Header, 2.54 32x2 64-pin
J21 PC104 Connector – 40 pin Box Header, 2.54 20x2 40-pin
J22 4P Power Source (Interconnect
to PC/104 – J20)
Pin Header, 2.54 , 4x1 4-pin
J23 PC/104 + (Optional) Box Header, 2.0 , 30x4 120-pin
J24 VGA Pin Header, 2.0 ,5x2 10-pin
J25 LCD Connector Box Header,2.0 ,22x2 44-pin
J26
J31
Display type Setup
Pin Header, 2.54 , 3x1 3-pin
J33 LINE-OUT Wafer, 1.25 , 4x1 4-pin
J34 MIC-IN Wafer, 1.25 , 4x1 4-pin
PWR-
LED
Power Active LED (Red) LED-SMD
Loading...