BIKE V-1000
MANUAL
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS EXERCISE EQUIPMENT.
* Keep children off your bike at all times.
* When the bike is in use, young childred and pets should be kept at least 10 feet away.
* Use this bike only for its intended use as described in the manual.
* Keep your hands away from all moving parts, Never turn the pedal crank arms by hand.
* Do not remove your feet from the pedals while they are in motion.
* After exercising, push down on the tension knob or turn the tension knob in a clockwise
direction to slow the flywheel down and decrease the potential for injury.
* Do not dismount the bike until both the pedals and flywheel have come to a complete
stop.
* Do not attempt to use this bike at high speeds or in standing positions until you have
practiced and are comfortable at lower speeds.
* Rotate the tension konb clockwise to add resistance to the flywheel prior to standing
on the pedals.
* Never drop or insert any object into any opening on this bike.
* Do not use without proper footwear.
To assure that the safety level of this bike is maintained, examine components for wear
and tear on a regular basis. Components that are worn excessively or inoperable should
be replaced immediately or the bike should be put out of use until it is repaired.
Caution:
if you experience chest pains, nausea, dizziness or shortness of breath, stop exercising
immediately and consult your physician before continuing.
V-1000 – INSTRUCTIONS FOR USE
1)
The model V842H is designed to be used as a group cycle in fitness studios,
health clubs or home use. It has a fixed wheel driven flywheel and should be used
under professional supervision. or asking your supplier before using.
2)
Installation – it is important that the V842H is correctly assembled and we recommend
that installation and assembly be carried out by suitably qualified personnel.
3) Handlebar and seat adjustment. It is important that the handlebar and seat are
set at the correct height for your body. Ask your instructor for assistance.
Adjusting the handlebar height - Make sure it is securely tightened and that there
is no lateral or vertical movement of the handlebar. Undo the Quick Release knob
which is located in front of head tube. Slide the handlebar/stem up or down to the
required height and then retighten.
The handlebar/stem position can also be adjusted forwards or backwards. Undo
the Quick Release lever located on below the slider. Slide the handlebar/stem
assembly forwards or backwards until you reach the required position. Then
securely re-tighten the Quick Release lever.
Adjusting the seat height – refer to above mention.
NOTE: there is a safety line engraved on the seat post. On no account
should the seat post ever be raised above this line.
4)
Pedals and toestraps – your feet should be securely positioned in the toe clips
during the exercise. Put your foot as far forward as you can into the toe-clip and then pull the strap tight.
5)
Resistance system- V840B bike is with durable chain direct drive transmission system,
to adjust the exercising resistance on the completed bike, undo the simply loosen or tighten
using adjustment knob. Press down the brake lever for stopping the wheel.
6)
The V842H should operate on a level surface with no lateral movement.
There are height adjuster pads located on either side underneath the rear foot.
Turn these pads clockwise or anti-clockwise until the bike is totally stable on the ground.
7)
Maintenance – like any other mechanical cycling device, the V842H should be
regularly maintained. Ask your supplier for a detailed maintenance programme.
Loading...