Vortex Core User Manual

!

CORE User manual

1.!Tiny & compact size, easy to portable

2.!Cherry MX switches inside

3.!Arbitrary programming key code and LED colors (Backlit only)

4.!PBT DSA profile keycaps with Dye-Sublimated technology

5.!Anodized CNC-machined aluminum case (Narrow bezel)

6.!Build in 4 layers

7.!Detachable Micro USB cable

1.!Keyboard x 1

2.!Micro USB Cable x 1

!

Step 1. Choose the layer (L1~L3) *

note

which you want to programmed.

Step 2. Press Fn + R_Ctrl to enter the programming mode

(R_Spacebar LED steadily lit in Blue color)

Step 3. Select a key you want to program (R_Spacebar LED flashing in Red Color)

Step 4. Key in the contents and then press Pn (R_Spacebar LED back to Blue color
again)

Step 5. Repeat step 2 ~ step 4 to program other keys.

Step 6. Press Fn + R_Ctrl to exit programming mode (Spacebar right LED off)

Support Fn layer (e.g., Fn + A) to program.

Support time delay, press 15ms key (Fn + T) each time to delay 15ms, press 0.1s
key (Fn + G) each time to delay 0.1s, press 0.5s key (Fn + B) each time to delay

0.5s.

Consecutive delay will add up but will only be counted as 1 key stroke.

Every key can program up to 32 key strokes.

If there is no key pressed for 15 sec. in programming mode, it will back to normal
mode.

1. Press and hold Fn + R, L_spacebar LED will be flashing in white color for 5
seconds, then the layer will restore to default.

2. Press and hold both Alt, L_spacebar LED will be flashing in white color for 5
seconds it will clean all layers’ key codes if you had programmed.

(return to default layer.)