Vornadobaby Sunny CS, sunny, Tempa Owner's Handbook Manual

nursery heater

Own ’s Handb³ k

read & save these important instructions

manual del propietario
lea y guarde estas instrucciones importantes

mode d’emploi
lire et conserver ces instructions importantes

Hola, me llamo Sunny CS, calefactor de cuartos de niños con sensores de
temperatura cribside™.
Bonjour, je suis le ventilateur chauffant Sunny CS, doté du détecteur de
température cribside

MC

2 English

Welce to Vnadobaby

Vornado began in 1945, continues to revolutionize airflow today and is now tailored for the nursery.

®

A THIRD

genati

NAME

Thank you for choosing to put a Vornadobaby product in your nursery. Our
goal is to provide healthy, comfortable air - through every season. Vornado has
been doing this for quite a while now. We’ve brought all our experience in air
health and comfort, and tailored it exclusively for your nursery.

3

English

Español p. 23 Français p. 44

Important Safety Instructions ................................................................. 4

Safety ......................................................................................................... 8

Sunny CS Controls ................................................................................... 9

Plug In & Placement .............................................................................. 10

How To Use ............................................................................................. 12

Crib Sensor Remote .............................................................................. 15

Keeping Sunny CS Clean ...................................................................... 18

Tips .......................................................................................................... 19

Troubleshooting .................................................................................... 20

Warranty ..................................................................................................22

Contents

4 English

READ ALL INSTRUCTIONS BEFORE
USING THIS HEATER
IMPORTANT SAFETY INSTRUCTIONS

This owner’s guide and any additional inserts are considered
part of the product. They contain important information about
safety, use and disposal. Before using the product, please
familiarize yourself with all operating and safety instructions.
Please keep all documents for future reference and pass these
documents on, together with the product, to any future owner.
See our website to view, download and print the most current
version of this owner’s guide.

INTENDED USE: This product is intended to heat and circulate
the air in indoor living spaces only. This product is not intended
for commercial or industrial use. The manufacturer assumes no
responsibility for damage or injury due to unauthorized use or
product modification. Failure to follow these directions will void
the productwarranty.

WARNING: Risk to Children and Impaired Persons

- Extreme caution is required during the installation, operation,
cleaning and maintenance of this product by or around
children under age 12 and anyone with reduced physical,
sensory or mental capabilities. Children should be supervised
to ensure that they do not play with the appliance, its parts
and packaging material.

INSTALLATION WARNING — To reduce risk of fire, electrical

shock and injury to persons, observe thefollowing:

- A heater has hot and arcing or sparking parts inside. Do not
use it in areas where gasoline, paint, or flammable liquids are
used or stored.

- Do not use this heater in an RV, boat or during any application
where battery power is converted to AC power.

- Place this product at least 3 feet away on all sides from,
electrical outlets, furniture, pillows, bedding, papers, clothes,
curtains and other objects that may cause or catch on fire.
Do not place the heater near a bed because objects such as
pillows or blankets can fall off the bed and be ignited by the
heater.

- To prevent a possible fire, do not place the heater on soft
surfaces, like a bed, where air intakes or exhaust can be
blocked in anymanner.

- No part of this product (the appliance, power cord, plug,
packaging, etc.) should be placed near furnaces, fireplaces,
stoves or other high temperature heat sources. Do not use in a
window, on an uneven or unstable surface, or nearwater.

- The appliance, power supply, power cord and plug cannot
come into contact with water. Do not use this product on wet
surfaces. Do not use this product in a bathtub or shower or
position product where it may fall into a bathtub, laundry,
swimming pool or other water container. Do not use this
product outdoors or expose it weather orelements.

- Do not run cord under carpeting. Do not cover cord with
throw rugs, runners, or similar coverings. Do not route under
furniture or appliances. Arrange cord away from traffic area
and where it will not be tripped over. The cord should not
hang over edges of counters or be placed where it can be

5

English

crimped or closed in doors. Place appliance near an easily
accessible outlet so the product can be unplugged quickly
during an emergency.

SAFE USE WARNING — To reduce risk of fire, electrical shock
and injury to persons, observe the following:

- Use this heater only as described in this manual. Any other use
not recommended by the manufacturer may cause fire, electric
shock, or injury to persons.

- Extreme caution is required at all times a heater is in operation.
Always unplug heater when not in use. Vornado does not
recommend unattended and unsupervised use of this heater.

- This heater is hot when in use. To avoid burns, do not let bare
skin touch hot surfaces. If provided, use handles when moving
thisheater.

- Always plug heaters directly into a wall outlet/receptacle.
Never use with an extension cord or relocatable power
tap (outlet/power strip). Do not use this heater on a surge­protected unit or Ground Fault Circuit Interrupted (GFCI)
outlet. Note: GFCI outlets are typically found in bathrooms and
kitchens and feature a “reset” button to prevent tripping of an
electrical circuit.

- Before plugging power cord into electrical outlet, be sure that
all electrical information on the rating label, including voltage,
is compatible with your outlet’s power supply.

- WARNING: To reduce likelihood of circuit overload, fire and
electric shock, do not operate with a solid state speed device,
such as a dimmer control switch. Use of this appliance on the
same electrical circuit as another high energy use product,
such as a vacuum cleaner, blender, variable speed fan or

circular saw is not advised. Do not use this heater with a timer
designed to automatically turn the unit on or off, as this may
accidentally disable the heater’s thermal cutout safety feature.

- Risk of fire. Do not operate if it has been dropped or if damage
is apparent to any part of the unit including the cord and plug.
Only original replacement parts may beused.

- Never use the cord as a handle or otherwise yank, strain or
stretch the power cord.

- While the product is plugged in, do not insert or allow foreign
objects to enter any ventilation or exhaust opening as this may
cause an electric shock or fire, or damage theheater.

- Check your heater cord and plug connections. A loose fitting
outlet can cause the plug to overheat or cause a fire. Be sure
plug fits tight in the outlet. Check frequently during use to
make sure plug and outlet are not hot. If so, discontinue using
heater and have outlet replaced by a qualified electrician.

- Never ignore the signs of an electrical problem, such as: warm
outlet coverplates, sparks when plugging in or operating, lights
flickering/dimming during operation. Immediately turn off
and unplug the appliance if any such problems are noticed.
Contact a qualified electrician to investigate possible causes
before operating the applianceagain.

- Note: Heaters draw more current than small appliances,
overheating of the outlet may occur even if it has not occurred
with the other appliances.

- This heater is for use with 120 volt electrical outlets. The cord
has a plug as shown at A in Figure 65.1, below. An adapter as
shown at C is available for connecting three-blade grounding­type plugs to two-slot receptacles. The green grounding
lug extending from the adapter must be connected to a

6 English

permanent ground such as a properly grounded outlet box.
The adapter should not be used if a three-slot grounded
receptacle is available.

- Before moving, repositioning, servicing, cleaning and when
not in use, use the product controls to turn off the power and
then unplug. To disconnect from outlet, grasp and pull only
the plug. Also, power off and unplug if the product will be left
unattended for an extended period of time or during electrical
storms.

- If your heater suddenly stops working:

• This heater is equipped with a thermal cutout safety feature

designed to automatically shut off when overheating is
detected. See the “RESET HEATER” instructions in this guide
to determine how to check and reset the heater.

• If the heater and other electrical products suddenly stop

working at the same time, your home circuit breaker
or fuse may have tripped due to an overload of power.
Consider only running your heater on the “low” setting,
only running one heater at once and unplugging all other
electrical products while running the heater, and/or hiring
an electrician to install an additional circuit to your home’s
electrical system.

SERVICING WARNING — To reduce risk of fire, electrical shock
and injury to persons, observe the following:

- Clean your product regularly, only as is instructed in this
manual. Prior to cleaning, turn off the power on your product
and unplug. Do not use gasoline, thinners, solvents, ammonias
or other chemicals for cleaning. Refer to the CLEANING
instructions provided.

- Do not open appliance housing while product is plugged in.
To avoid risk of shock, all service and/or repairs must be done
by a Vornado Authorized Service Center.

DISPOSAL WARNING
To reduce waste and environmental harm, observe
thefollowing:

PACKAGE RECYCLING: The packaging protects the

appliance from transport damage. The packaging
materials are selected from the point of view of their
environmental friendliness and disposal technology and
are therefor recyclable. Dispose of all packaging materials
in an environmentally responsiblemanner.

This Device complies with Part 15 of the FCC rules. Operation
is subject to the following two conditions: 1) this device may
not cause interference, and 2) this device must accept any
interference, including interference that may cause undesired
operation of the device. This heater operates with an RF (Radio
Frequency) remote control. Interference with other remote
control products in your home is possible.

Grounding

Pin

Metal Screw

Cover of Grounded

Outlet Box

Grounding

Means

(A)

(B)

(C)

Adapter

Figure 65.1

7

English

This device complies with Industry Canada’s licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This device
must accept any interference, including interference that may
cause undesired operation of the device. Under Industry Canada
regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved
for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary for successful
communication.

Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes: (1) l’appareil ne
doit pas produire de brouillage, et (2) l’utilisateur de l’appareil
doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.

Note: Please recycle or dispose of batteries per localregulations.

WARNING: Batteries may pose a chocking hazard. Do not let
children handle batteries.

PRECAUTION: Do not dispose of batteries in fire. Batteries may
explode or leak.

WARNING: Battery Leakage

Sunny CS remote uses AA batteries. It is recommended to use

rechargeable nickle metal hydride (NiMH) batteries or high
quality alkaline batteries. If you use rechargeable nickel metal
hydride (NiMH) batteries, be sure to follow the manufacturer’s
guidelines for safety and proper usage.

Leakage of battery fluid can cause personal injury as well as
damage to your Sunny CS remote. If battery leakage occurs,
thoroughly wash the affected skin and clothes. Keep battery fluid
away from your eyes and mouth. Leaking batteries may make
popping sounds.

To avoid battery leakage:

- Do not mix used and new batteries (replace all batteries at the
same time).

- Do not mix different brands of batteries.

- Do not use Lithium ion, nickel cadmium (NiCad), or carbon zinc
batteries.

- Do not leave batteries in your Sunny CS remote for long
periods of non-use.

- Do not recharge alkaline or non-rechargeable batteries.

- Do not put the batteries in backwards. Make sure that the
positive (+) and negative (-) ends are facing the correct
directions. Insert the negative end first. When removing
batteries, remove the positive end first.

- Do not use damaged, deformed or leaking batteries.

- Do not dispose of batteries in a fire.

SAVE THESE INSTRUCTIONS