Vornado Flippi User Manual

User’s Guide

READ AND KEEP

THESE IMPORTANT INSTRUCTIONS

Guide de l’utilisateur

LIRE ET CONSERVEZ

CES CONSIGNES IMPOR

TANTES

Manual de usuario

LEA Y GUARDE ESTAS

INSTRUCCIONES IMPORTANTES

Flip up to cool down

Relevez-le pour rafraîchir

Voltee hacia arriba

para enfriar

2

READ AND SAVE THESE INSTRUCTIONS

This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this safety feature.

WARNING! To reduce the risk of fire or electric shock, do not use this
product with any electronic speed-control device.

WARNING! This is a fan - not a toy and not intended for children. To
reduce the risk of personal injury and electric shock, the Flippi™ fan
should not be used, operated or placed where children can reach it.

Do unplug Flippi before cleaning.
Do clean your Flippi regularly.
Do use common sense when using this and/or any electrical appliance.
Do use caution when positioning this product on an elevated surface, as

vibrations or accidental bumping may cause the fan to unexpectedly fall.

Do Not position too close to drapes as they may be drawn into the fan.
Do Not use on wet surfaces.
Do Not use in a bathtub or shower.
Do Not immerse in water nor allow water to drip in the motor housing.
Do Not use gasoline, thinners, solvents, ammonias or other chemicals

for cleaning.

Do Not use near furnaces, fireplaces, stoves or other high-temperature

heat sources.

Do Not use this product outdoors.
Do Not carry this product by the cord nor use the cord as a handle.
Do Not use this product if it has a damaged cord or plug.
Do Not operate the fan while closed in the nested position as it will not circulate

the air.

ENGLISH

FRANÇAIS

ESPAÑOL

3

Congratulations on purchasing the
Vornado® Flippi

™

The Vornado Flippi is an innovative personal air circulator with chic
style. The small but mighty Flippi is unlike a typical fan; it uses Vornado's
signature Vortex

Technology to powerfully circulate the air around you.
The deep-pitched blade, ducted airflow and focusing AirTensity® grill
project a beam of air 20 - 40 feet, depending on model. Creating the
perfect breeze and eliminating hot and cold spots.

Care and Maintenance

The motor is permanently lubricated and requires no oiling. Because
your Flippi moves air it will require regular cleaning. Be sure to unplug
the unit prior to cleaning. To clean, wipe off with a soft cloth, or vacuum
the outside surfaces. The fan has no user serviceable parts inside and
cannot be opened for cleaning.

Flippi™ is the latest addition to Vornado's family
of innovative air comfort products.

Visit www.vornado.com to learn more or purchase Vornado's other high performance
products, including: Whole Room Air Circulators, Whole Room Heaters, Humidifiers, Air
Purifiers and Modern Fans.

ENGLISH

FRANÇAIS

ESPAÑOL

4

How to use

Your Flippi™ air circulator is completely assembled and ready for immediate use. Simply plug
in Flippi and enjoy its cooling effect. Thanks to Flippi’s small size and easy use, it can be
used to provide a cool breeze in almost any space. Flippi features Vornado’s signature Vortex
Technology to move a tight beam of air out 20 to 40 feet, depending on the model. Flippi
was engineered to provide just the right amount of air, either directed at you to create a nice
breeze, or away from you to create swirling cur

rents of air, rejuvinating your personal space.

Fan Speed

Models V6 and V8 come with two speed settings; set to "I" for
Low speed, "II"

for High speed, and "O" for OFF. Model V10 has 3 speeds,
set "I" for Low, "II" for Medium,"III" for High, and "O" for OFF. Select
the speed that gives you just the right amount of air, from a whisper quiet
gentle breeze to a powe

rful rush of air.

Oscillation

Models V8 and V10 feature oscillation for more airflow possibilities. Oscillation
on the V8 and V10 can be turned on or off with the rocker switch on the back of
the base of the unit. Press (O) to turn oscillation ON and (I) to turn oscillation OFF.

Direct Airflow

The power head can be adjusted to various angles for additional
airflow options. In the warm months, position the beam of air directly
at you, across the room, or up towards the ceiling, to create an even
temperature throughout the room. In the winter, direct Flippi’s beam of
air up and set at low speed to circulate warm air down off the ceiling to
create an even temperature from

floor to ceiling. For a clean and unobtrusive

look when not in use, the head can be pointed straight down into the
"nested" position. Do not operate the fan when in the nested position,
as no air will be circulated. Position Flippi away from objects that may
block airflow from the back or from the front. If using Flippi on an elevate

d
surface, use caution in positioning it to minimize the possibility of it falling
from that surface.

ENGLISH

FRANÇAIS

ESPAÑOL

5