Page 1
model
EXO5
WHOLE ROOM CIRCULATOR
OWNER’S GUIDE
GUÍA DEL PROPIETARIO DEL
CIRCULADOR DE AIRE PARA TODA
LA HABITACIÓN
GUIDE DE L’UTILISATEUR DU
VENTILATEUR INTÉGRAL DE PIÈCE
READ AND SAVE
THESE INSTRUCTIONS
LEER Y GUARDAR ESTAS
INSTRUCCIONES
LISEZ ET CONSERVEZ CES
INSTRUCTIONS
vornado.com
Page 2
we expect
if it’s not
2 English
this product
to be PERFECT
WE will make
it right.
vornado.com
800.234.0604
help@vornado.com
Page 3
CONTENTS
Important Safety Instructions ............................................................. 4
Features ..............................................................................................7
Controls ...............................................................................................8
How to Use .........................................................................................9
Assembly ........................................................................................... 10
Cleaning ............................................................................................ 13
Troubleshooting ............................................................................... 15
Warranty ............................................................................................ 16
Español p. 17 Français p. 32
English
3
Page 4
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
This owner’s guide and any additional inserts are considered part
of the product. They contain important information about safety,
use and disposal. Before using the product, please familiarize
yourself with all operating and safety instructions. Please keep all
documents for future reference and pass these documents on,
together with the product, to any future owner. See www.vornado.
com/circulators-manuals to view, download and print the most
current version of these instructions.
INTENDED USE: This product is intended to circulate the air in
indoor living spaces only in the United States and Canada. This
product is not intended for commercial or industrial use. The
manufacturer assumes no responsibility for damage or injury due
to unauthorized use or product modication. Failure to follow
these directions will void the product warranty.
WARNING: Risk to Children and Impaired Persons
- Supervision is required during the installation, operation,
cleaning and maintenance of this product by children under
age 12 and anyone with reduced physical, sensory or mental
capabilities. Children should be supervised to ensure that they
do not play with the appliance, its parts and packaging material.
INSTALLATION WARNING—To reduce risk of re, electrical
shock and injury to persons, observe the following:
- Place this product away from curtains, draperies, tablecloths and
other fabrics, since they may be drawn into the fan, damage the
motor and/or cause a re.
- No part of this product (the appliance, power cord, plug,
packaging, etc.) should be placed near furnaces, replaces,
stoves or other high temperature heat sources. Do not use this
product in a window, on an uneven or unstable surface, or
near water.
- The appliance, power supply, power cord and plug cannot come
into contact with water. Do not use this product on wet surfaces.
Do not use this product in a bathtub or shower or position
product where it may fall into a bathtub, laundry, swimming pool
or other water container. Do not use this product outdoors or
expose it weather or elements.
- Do not run cord under carpeting. Do not cover cord with throw
rugs, runners, or similar coverings. Do not route the cord under
furniture or appliances. Arrange cord away from trafc area and
where it will not be tripped over. The cord should not hang over
edges of counters or be placed where it can be crimped or
closed in doors. Place appliance near an easily accessible outlet
so the product can be unplugged quickly during an emergency.
SAFE USE WARNING—To reduce risk of re, electrical shock
and injury to persons, observe the following:
- WARNING: To reduce likelihood of circuit overload, re and
electric shock, do not operate with a solid state speed device,
such as a dimmer control switch.
- Do not operate any fan with a damaged cord or plug. Discard
fan or return to an authorized service facility for examination
and/or repair. Do not operate unit if it has been dropped
or is damage is apparent to any part of the unit. To avoid
risk of electrical shock, do not attempt to repair or replace
4 English
Page 5
parts. Only original replacement parts may be used. Contact
Vornado Consumer Service at 1-800-234-0604 (phone) or
consumerservice@vornado.com (email) for further instructions
about replacement and repair.
- Risk of re. Your appliance may be equipped with a detachable
power supply or a cord/plug with a safety device such as a fuse.
Use only the power cord and plug provided.
- Before plugging power cord into electrical outlet, be sure that
all electrical information on the rating label, including voltage, is
compatible with your outlet’s power supply.
- Never use the cord as a handle or otherwise yank, strain or
stretch the power cord.
- While the product is plugged in, do not insert or allow foreign
objects to enter any input or output opening as this may cause
risk of electric shock or re, or damage the product.
- A loose t between wall outlet (receptacle) and plug may cause
overheating and distortion of the plug. Discontinue use of the
product in this outlet. Contact a qualied electrician to replace
loose or worn outlets.
This product's power cord is equipped with a three-prong,
grounded plug that must be inserted into a grounded
receptacle.
- Before moving, repositioning, servicing, cleaning and when not
in use, use the product controls to turn off the power and then
unplug. To disconnect from outlet, grasp and pull only the plug.
Also, power off and unplug if the product will be left unattended
for an extended period of time or during electrical storms.
SERVICING WARNING—To reduce risk of re, electrical shock
and injury to persons, observe the following:
- Clean your product regularly, only as is instructed in this manual.
Prior to cleaning, turn off the power on your product and unplug.
Do not use gasoline, thinners, solvents, ammonias or other
chemicals for cleaning. Refer to the CLEANING
instructions provided.
- Do not open appliance housing. To avoid risk of shock, all
service and/or repairs must be done by a Vornado Authorized
Service Center.
- This product employs overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation. If the fuse blows,
unplug the product from the outlet. Replace the fuse as per the
user servicing instructions (follow product marking for proper
fuse rating) and check the product. If the replacement fuse
blows, a short-circuit may be present and the product should
be discarded or returned to an authorized service facility for
examination and/or repair.
User Servicing Instructions
1. Using the product controls, turn off the appliance.
2. Grasp the plug (not the cord) and disconnect from the
outlet.
3. Risk of Fire. Replace fuse only with 2.5 Amp, 125 Volt
fuse as approved by Vornado Consumer Service. For an
authorized replacement fuse, please contact Vornado
Consumer Service.
4. Once the replacement is received, use a small at-head
screwdriver to slide open the fuse cover (located on the
plug) (See Page 6, Fig. A).
5. Remove fuse by using the screwdriver to gently lift each
end of the fuse (See Page 6, Fig. B).
English
5
Page 6
6. Install the replacement fuse by using the screwdriver to
gently push each metal end of the fuse into the receptacle
one at a time. Do not push on the center of the fuse—it is
fragile and may break (See Fig. C).
7. Slide the fuse cover closed using the screwdriver. When
closed, the cover should t completely in the plug. No part
of the cover should stick out (See Fig. D).
8. Plug your appliance into the outlet and turn the power on.
9. If the replacement fuse blows, a short-circuit may be
present and the product should be discarded or returned
to an authorized service facility for examination
and/or repair.
Risk of re. Do not replace attachment plug. Contains a safety
device (fuse, AFCI, LCDI) that should not be removed. Discard
product if the attachment plug is damaged.
FCC Consumer Advisement
This equipment may generate, use and/or radiate radio
frequency energy that may cause harmful interference to
radio communications. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to contact Vornado Consumer Service. Changes or
modications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the product
DISPOSAL WARNING
To reduce waste and environmental harm, observe the
following:
PACKAGE RECYCLING: The packaging protects the
appliance from transport damage. The packaging materials
are selected from the point of view of their environmental
friendliness and disposal technology and are therefor
recyclable. Dispose of all packaging materials in an
environmentally responsible manner.
6 English
Page 7
FEATURES
POWERFUL IP-54 RATED MOTOR
Dust proof, long life motor that will
endure the rigors of the job site.
TOOL FREE ASSEMBLY
EXTRA LONG 8’
GROUNDED POWER CORD
Ample cord length plus a fully
secure wall connection
TOGGLE SWITCH
Oversized glove-friendly double
toggle switch
WALL MOUNTABLE
Wall-mount option
for added versatility
NON-SLIP FEET
Product will stay
where you put it.
FINGER FRIENDLY
DESIGN
Resists curious ngers.
REMOVABLE GRILL
For easy cleaning.
SWIVEL HEAD
360° pivoting head
to direct air where
needed
COLLAPSIBLE
TRIPOD BASE
Quick and easy setup,
takedown & storage
English
7
Page 8
CONTROLS
POWER ON/OFF
Select High (III),
Medium (II), Low (I) fan
speed or power off (O)
8 English
Page 9
HOW TO USE
The EXO5 can be used in one of three different ways.
1. TRIPOD BASE 2. CLAMP 3. WALL MOUNT
English
9
Page 10
ASSEMBLY
The EXO5 can be used in one of three different ways.
1. Connect the Locking Socket Joint (B) to the
EXO5 Fan Head (A) at any at location along
the Roll Cage (C).Before proceeding, ensure
that the knob is properly tightened and the
Locking Socket Joint (B) is fully secured to the
Fan Head (A). Do not pinch the power cord
between the Locking Socket Joint (B) and the
Fan Head (A).
2. To connect the Fan Head/Locking Socket Joint
assembly to either the to the Clamp (E) or the
Tripod Base (F), simply insert into the under side
of the Locking Socket Joint (D) and twist
until secured.
3. To remove Clamp (E) or the Tripod Base (F),
simply twist until loosened.
A
C
B
D
E
F
10 English
Page 11
HOW TO USE
TRIPOD BASE ATTACHMENT CLAMP ATTACHMENT
1. After product assembly, position unit on at and level surface
as shown below.
2. To adjust angle of head tilt, simply loosen the connection
between the Fan Head (A) and the Tripod Base (B) with a twist,
adjust to desired angle and then twist to retighten.
Note: Product
should be used
with Tripod
Base (B) in
fully extended
position and
fully secured to
Fan Head (A).
A
1. After product assembly, twist the Cam Lock Knob (C) to
open the Clamp (D).
2. Position the Clamp (D) over a solid surface up to 2” thick.
3. Twist the Cam Lock Knob (C) to tighten. Take care Clamp (D)
is fully engaged on solid surface before releasing.
Note: DO NOT
attach to slick or
oily surfaces as
this may allow
product to come
loose. Make sure
solid surface can
support the weight
of the product.
B
D
C
Note: For both attachment options, keep the electrical cord safely routed to avoid being tripped over or pulled. Avoid placing the
product where it could be easily bumped.
English
11
Page 12
HOW TO USE
WALL MOUNT INSTALLATION
1. Locate the Key Holes (A) on the back of the product.
2. Find and mark two circles on the wall where the product
will be mounted. The circles need to be 5” apart from
center to center.
NOTE: Is it recommended to mount the EXO5 on a solid
surface or wall stud. Do NOT hang the product on the
ceiling. Use drywall anchors if a stud is not available.
3. Drill 2 #10 panhead screws into the wall (screws not
included). Screws should be weight rated for 10 lb
vertical load each.
4. Leave about ¼” of each screw exposed.
5. Place the wide portions of the Key Holes over the heads
of the 2 screws.
6. Slide the product down until the screws are inside the
narrow portion of the key holes and the product is
secured to surface.
Note: Hang product from sturdy location using large screws that will
support product. Be careful not to hang the product in such a way
that it prevents normal fan operation or damages the cord. Keep the
electrical cord safely routed to avoid being tripped over or pulled.
Avoid placing the product where it could be easily bumped.
A
12 English
Page 13
CLEANING
GRILL REMOVAL Screwdriver required.
WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing grill.
1. Remove the 6 screws located on the front of
the grill.
2. Dust or wash the Front Grill with a mild
dishwashing soap. Do not place grill in the
dishwasher. The excessiveheat can distort the
plastic.
3. To reattach - align the 6 screw holes and
replace all the screws.
Use the brush attachment on your household
vacuum cleaner to vacuum any accumulated
dust off the Front Grill and Air Inlets.
Note: The motor is permanently lubricated
and requires no oiling.
Screw
Screw
Screw
Screw
Screw
Screw
English
13
Page 14
CLEANING
BLADE REMOVAL
WARNING: To reduce the risk of electrical shock and injury to
persons, unplug the circulator before removing grill.
1. First, remove the nut from the shaft by turning the
nut clockwise to loosen. Remove the washer. Pull the
blade straight out from the shaft.
2. Wipe the Blade with a damp cloth. If your circulator
is used in a greasy environment, such as a kitchen,
mild soap or a common household cleaner may be
necessary. Do not use solvents. Do not place blade
in the dishwasher. The excessive heat can distort the
plastic.
3. To reattach - be certain the at side of the shaft
aligns directly with the corresponding at side on
the blade’s socket. Push the blade all the way on
the shaft until it bottoms out. Do not use a hammer
as this could result in bearing damage. Reinstall
washer and nut.
Nut
14 English
Page 15
TROUBLESHOOTING
POSSIBLE CAUSE AND SOLUTIONPROBLEM
The unit fails to power on.
Airow is weak or slow.
GFCI has tripped.
Unit is not plugged in. Plug Power Cord into electrical outlet.
Ensure unit fan speed setting is selected.
Plug fuse has blown. Replace fuse (See USER SERVICING INSTRUCTIONS on page 5).
Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.
The outlet is worn or damaged. Try another outlet or contact a qualied electrician.
Unit set to a low speed setting. Adjust to a higher speed setting.
Airow is blocked. Remove obstruction.
Adjust direction of airow towards the user.
Under certain conditions, it is possible for a reset GFCI (Ground Fault Circuit Interrupter) outlet to trip
when the user is changing speeds on a Vornado circulator. In this event, change to an outlet that is not
connected to a GFCI device. It could also indicate a weak or defective GFCI outlet. Contact a qualied
electrician to check the GFCI outlet.
English
15
Page 16
WARRANTY
We expect this product to be perfect. If you’re not satised with this product, let us know.
We’re Here To Help
800.234.0604
vornado.com
help@vornado.com
Vornado Air LLC (“Vornado”) warrants to the original consumer or purchaser this Vornado®
Whole Room Circulator (“Product”) is free from defects in material or workmanship for a
period of ve (5) years from the date of purchase. If any such defect is discovered within
the warranty period, Vornado, at its discretion, will repair or replace the Product at no cost.
For warranty or repair service: Call 1-800-234-0604 or email help@vornado.com to obtain
a Return Authorization (“RA”) form. Please have or include your Product’s model number
and serial number, as well as your name, address, city, state, zip code and phone number
when contacting Vornado for warranty service.
After receiving the RA form, ship your Product to: Vornado Air LLC Attn: Warranty & Repair
415 East 13th Street Andover, KS 67002. For your convenience, please have your model
number and serial number when contacting Vornado with service inquiries. To assure
proper handling, packages must be clearly marked with the RA number. Packages not
clearly marked with the RA number may be refused at the receiving dock. Please allow 1-2
weeks for repair and return of your Product after the Product is received.
Repairs not covered by the warranty or outside the warranty period will require a fee to
cover the cost of materials, labor, handling and shipping.
This warranty does not apply to defects resulting from abuse of the Product, modication,
alteration, mishandling, improper maintenance, commercial use or repair or service of the
Product by anyone other than Vornado; damages which occur in shipment or are attributed
to acts of God. Improper product use, which includes using an external device that
alters or converts the voltage or frequency of electricity, or shipping a Vornado product
Designed, engineered and supported in Andover, KS
16 English
to a country not intended for use will void all warranties. Any unauthorized product
modication, repair by unauthorized repair center, or use of non-approved replacement
parts is not recommended and any consequences will not be covered by support services
or product warranties. The product warranty will be honored only on models that are being
used in the country intended. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. VORNADO SHALL NOT
BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN
DURATION TO THE DURATION OF THIS WARRANTY. Some states do not allow the
exclusion or limitation of incidental or consequential damages, or allow limitations on how
long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This warranty gives you specic legal rights, and you may have other rights that vary from
state to state. The manufacturer assumes no responsibility for damage caused by failure
to follow these instructions or improper product use. Any such actions will invalidate the
product warranty.
All company names and product names are trademarks of their respective owners. ©
All rights reserved. All technical information, data, and instructions for the installation,
connection, and operation contained in these instructions for use correspond to the latest
available information at time of printing. The contents of this manual may differ slightly
from the actual product. Observe any additional supplements.
© 2017 Vornado Air LLC Andover, KS 67002 U.S. Patent Pending. Specifications subject to change
without notice. Vornado® is a trademark owned by Vornado Air LLC.
Page 17
Vornado Air, LLC
415 East 13th Street, Andover, Kansas 67002
800.234.0604 | vornado.com
CL3-0541 R-, V00
Loading...