Vornado EV100 User Manual

Download

Page 1

model EV100

EVAPORATIVE WHOLE ROOM HUMIDIFIER OWNER’S GUIDE

READ AND SAVE THESE INSTRUCTIONS

vornado.com

Page 2

we expect

if it’s not,

2 English

this product

to be PERFECT

WE will make

it right

vornado.com

800.234.0604 help@vornado.com

Page 3

CONTENTS

Important Safety Instructions ............................................................. 4

Getting Started ................................................................................... 7

Features ..............................................................................................8

Controls ...............................................................................................9

Filling Water Tank ..............................................................................10

How to Use .......................................................................................11

Replacing Wick ..................................................................................12

Automatic Rell Program .................................................................. 12

Cleaning ............................................................................................ 13

Storage ..............................................................................................16

Tips .................................................................................................... 16

Troubleshooting ............................................................................... 17

Warranty ............................................................................................ 18

English

Page 4

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

This owner's guide and any additional inserts are considered part of the product. They contain important information about safety, use and disposal. Before using the product, please familiarize yourself with all operating and safety instructions. Please keep all documents for future reference and pass these documents on, together with the product, to any future owner. See our website to view, download and print the most current version of this owner’s guide.

INTENDED USE: This product is intended to humidify and circulate the air in indoor living spaces only in the United States and Canada. This product is not intended for commercial or industrial use. The manufacturer assumes no responsibility for damage or injury due to

unauthorized use or product modication. Failure to follow these

directions will void the product warranty.

WARNING: Risk to Children and Impaired Persons

- Supervision is required during the installation, operation, cleaning and maintenance of this product by children under age 12 and anyone with reduced physical, sensory or mental capabilities. Children should be supervised to ensure that they do not play with the appliance, its parts and packaging material.

INSTALLATION WARNING — To reduce risk of re, electrical shock and injury to persons, observe the following:

- No part of this product (the appliance, power cord, plug, packaging,

etc.) should be placed near furnaces, replaces, stoves or other high

temperature heat sources. Do not use in a window, on an uneven or unstable surface, or near water.

- The appliance, power supply, power cord and plug cannot come into contact with water. Do not use this product on wet surfaces. Do not use this product in a bathtub or shower or position product where it may fall into a bathtub, laundry, swimming pool or other water container. Do not use this product outdoors or expose it to weather or elements.

- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route under furniture or

appliances. Arrange cord away from trafc area and where it will not

be tripped over. The cord should not hang over edges of counters or be placed where it can be crimped or closed in doors. Place appliance near an easily accessible outlet so the product can be unplugged quickly during an emergency.

SAFE USE WARNING — To reduce risk of re, electrical shock and injury to persons, observe the following:

- WARNING: To reduce likelihood of circuit overload, re and electric shock, do not operate with a solid state speed device, such as a dimmer control switch.

- Do not operate unit if the unit has been dropped or damaged. Do not use this product if it has a damaged power cord or plug. To avoid risk of electrical shock, do not attempt to repair or replace parts. Only original replacement parts may be used. If the power cord is damaged, it must be replaced by the manufacturer, its

service agent, or similarly qualied persons in order to avoid a

hazard. Contact Vornado Consumer Service at 1-800-234-0604 (phone) or consumerservice@vornado.com (email) for further instructions about replacement and repair.

- Risk of re. Your appliance may be equipped with a detachable

power supply or a cord/plug with a safety device such as a fuse. Use only the power cord and plug provided.

4 English

Page 5

- Before plugging power cord into electrical outlet, be sure that all electrical information on the rating label, including voltage, is compatible with your outlet’s power supply.

- Never use the cord as a handle or otherwise yank, strain or stretch the power cord.

- While the product is plugged in, do not insert or allow foreign objects to enter any input or output opening as this may cause risk

of electric shock or re, or damage the product.

- A loose t between wall outlet (receptacle) and plug may cause

overheating and distortion of the plug. Discontinue use of the

product in this outlet. Contact a qualied electrician to replace

loose or worn outlets.

- This appliance has a polarized plug (one blade is wider than the other.) To reduce the risk of electrical shock, this plug is intended to

t in a polarized outlet only one way. If the plug does not t fully in the outlet, reverse the plug. If it still does not t, contact a qualied

electrician. Do not attempt to defeat this safety feature.

- Before lling with water, moving, repositioning, servicing, cleaning

and when not in use, use the product controls to turn off the power and then unplug. To disconnect from outlet, grasp and pull only the plug. Also, power off and unplug if the product will be left unattended for an extended period of time or during electrical storms.

- Electric shock can occur when liquid comes in contact with

electricity. Be careful when removing the water tank and relling to

avoid electric shock. Do not pour water through the top Outlet Air Grill on the power head.

- Turn the humidier off if the relative humidity exceeds 60%. Humidity levels above 60% may allow moisture to build up indoors

and condense on surfaces, where microorganisms can settle and

grow. For accurate readings, use a hygrometer which is available at

most hardware stores and home centers.

SERVICING WARNING — To reduce risk of re, electrical shock and injury to persons, observe the following:

- Wicks in the humidier have been treated with antimicrobial

preservative with the following active substances: Cellulose (900434-6) and Omadine Salts (13463-41-7). This protection applies only

to the wick (lter) and not the entire appliance. WARNING: Wash hands and avoid touching eyes after handling the wick (lter).

- Clean your product regularly, only as is instructed in this manual. Prior to cleaning, turn off the power on your product and unplug. Do not use gasoline, thinners, solvents, ammonias or other chemicals for cleaning. Refer to the CLEANING instructions provided.

- Do not open appliance housing while product is plugged in. To avoid risk of shock, all service and/or repairs must be done by a Vornado Authorized Service Center.

- Protect against the growth of mold, mildew and other microorganisms by emptying the water tank immediately after each use. If water is left in the tank for longer than 8 hours, thoroughly clean and disinfect the unit as described in the section of this Owner’s Guide referenced as “CLEANING”.

DISPOSAL WARNING

To reduce waste and environmental harm, observe the following:

PACKAGE RECYCLING: The packaging protects the appliance from transport damage. The packaging materials are selected from the point of view of their environmental friendliness and disposal technology and are therefore recyclable. Dispose of all packaging materials in an

English

Page 6

environmentally responsible manner.

FCC Consumer Advisement

This equipment may generate, use and/or radiate radio frequency energy that may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to contact Vornado Consumer Service at

1-800-234-0604. Changes or modications to this unit not expressly

approved by the party responsible for compliance could void the user’s authority to operate the equipment.

6 English

Page 7

GETTING STARTED

Before operating, ALWAYS lift from the bottom by using the handles located on the base. Lifting the Water Tank handle on the Water Tank will

cause the tank to detach from the humidier. Before use, check appliance for visible damage. DO NOT USE if there is evidence of damage. If any damage is found, contact Vornado Air, LLC at 1-800-234-0604.

A humidier is quite useful in supplying necessary moisture to dry air. It should be

Check for Leaks

Damage due to shipping may cause leaks in Base or Water Tank. A visual inspection may not reveal hairline fractures.

1. Place humidier on a water-resistant surface.

2. Fill Water Tank with water to inspect for leaks.

3. Pour several cups of water into Base to inspect

for leaks.

Not Leaking?

Empty water from Base and install full Water Tank.

Leaking?

In the slight chance your humidier has leaks,

contact Consumer Service and we will immediately replace damaged parts.

used with proper care to prevent overhumidication.

A good rule of thumb would be to gauge the condensation or frost on

windows. Adjust your humidier to a point where this condition is at a

minimum. These adjustments should be made when major changes in outdoor temperatures occur.

Humidiers can be placed in any living area that has a convenient location and

provides distribution of the moist air to the living area. The measured output of a

humidier is based upon continuous operation at standard rating conditions. With

normal variations of indoor and outdoor conditions, the humidistat-controlled

humidier will not run continuously at maximum output unless the controls are set to

do so.

INITIAL HUMIDITY REQUIREMENTS:

When initially installed or when placed in operation at the beginning of each season,

the humidier equipped with a humidistat may run constantly for a day or so and,

thus, evaporate large quantities of moisture. When the home and its furnishings have absorbed moisture and become stabilized at the desired humidity level, the

amount of water used will diminish and the humidier operation will maintain the

desired humidity level.

English

Page 8

FEATURES

SIMPLETANK™ SYSTEM

This Water Tank is easy to

carry, ll, install, clean and

view water level. Large 1-gallon capacity.

POWER HEAD

Powerful motor circulates

humidied air throughout

whole room. Easy to access for cleaning.

WICK

Wicks up water and

lters out impurities.

BASE

Durable and easy to clean.

8 English

AIR OUTLET GRILL

Initiates Vornado’s signature Vortex circulation. Removable for easy cleaning.

AIR INLET GRILL

Designed for efcient air intake.

CARRY HANDLES

Integrated handles on sides of base for lifting and carrying.

Page 9

CONTROLS

POWER ON/OFF

Turn the humidier On/Off.

Select desired HIGH or LOW fan speed, or AUTO mode.

HUMIDITY

Control humidity level at

40%–60%, or allow unit to run

continuously.

HUMIDISTAT

Reads humidity in room for automatic humidity control.

LED INDICATOR LIGHTS

Displays current settings.

English

Page 10

FILLING WATER TANK

Note: Spills can occur during cleaning, moving or relling the Water

Tank, so be careful to avoid spills when doing these activities.

1. Unplug humidier and place on a level surface.

2. Remove Water Tank from the base by grasping the top integrated

handle and pulling up towards you (A). CAUTION: When

removing Water Tank lift vertically, do not twist tank while still in base or Cap may disengage and leak.

A B

3. Turn the Water Tank upside down and remove the Cap by turning it counterclockwise (B).

4. Gently place Water Tank on a at surface and ll with cool tap

water (C).

5. Ensure Gasket, the rubber ring around the Water Tank, is properly positioned. Insert the Cap into the grooves of the tank and turn clockwise until tightened.

6. Lower Water Tank into Base, positioning Water Tank around the ledge for secure placement (D). Once in nested position, water outlet valve inside Cap opens, releasing water into Base.

10 English

Gasket Ring

Page 11

HOW TO USE

1. Position humidier to not blow directly on objects or plants. Plug

power cord into standard grounded wall outlet.

2. To turn humidier on, press Power Button. The indicator lights for HIGH fan speed, 50% humidity will illuminate. After rst use, humidity setting is saved when powered off. Fan speed will default

HIGH Operation for fast humidication of larger rooms. High-speed

operation will evaporate 1 gallon of water (+/- 10%) in 24 hours of continuous operation. (This assumes room conditions of 70º F and 30% relative humidity.) Will operate at High fan speed until the humidity set point is reached. The Fan will then turn off until the

humidity level drops below set point.

LOW

Operation for quiet, nighttime use or smaller rooms. On Low

operation, your humidier may run without relling for extended

periods. Will operate at Low fan speed until the humidity set point

is reached. The Fan will then turn off until the humidity level drops

below set point.

AUTO

Operation for more precise humidity control. Fan speed will uctuate between high, low and off to better maintain set humidity

to HIGH. If unit is unplugged, during next use, settings will default

to HIGH fan speed, 50% humidity.

3. Use Power Button to select HIGH or LOW fan speed or AUTO

mode until the desired setting is illuminated.

level with the minimal amount of fan noise. While in Auto, you

will only be able to mode through humidity settings (40% - 60%).

Continuous will be disabled.

HUMIDITY – 40%–60% OR CONTINUOUS

Set the humidity level by pressing the HUMIDITY button until the desired humidication level is illuminated. The humidier will

operate until the desired humidity level is reached. At this point, the

Fan will turn off. The Humidity Level indicator light will remain on. If the Fan does not turn on, the humidity setting may be lower than

the room humidity level. Increase the humidity set point until the

Fan turns on. This is an indication of the level of humidity already

in the room. While in Continuous, you will only be able to mode through High and Low fan speeds before unit powers off. Auto mode will be disabled.

English

Page 12

REPLACING WICK

While your humidier came equipped with a Wick, you will eventually have to replace it, as they last approximately 4–8 weeks, depending

on use. Many factors affect the life of the Wicks, including amount of use, water hardness and outside environmental factors. You will know the Wick needs to be replaced when it becomes hard and is no longer absorbing the water effectively. Replace the Wick with a genuine Vornado® Wick. While other brands may t our units, these wicks do not carry the same quality and life as our own and may diminish the

humidier’s performance.

REPLACING WICK

1. Turn humidier Off and unplug.

2. Remove humidier body from base by

lifting up.

3. Remove and discard used Wick.

4. Install new genuine Vornado Wick by

slightly bending the Wick to match curve

of unit. Make sure Wick ts ush against bottom and side of humidier.

5. Replace humidier body. Your humidier

is now ready for use.

Wicks contain an antimicrobial preservative. Protection is limited to the product. Active Substances: Cellulose (9004-34-6) and Omadine Salts (13463-41-7). Wash hands and avoid touching eyes after handling wick.

12 English

The additional sodium in chemically softened water may cause Wicks to harden. Try using untreated or tap water. Hard water or water with excessive minerals, such as lime or iron, may shorten Wick life. Try Bacteriostat or Water Treatment found at most hardware or home specialty stores.

On rst use, the Wick may give off a mild odor. The odor is not harmful and will go away after the rst few hours of operation. If the

odor is exceptionally strong, you can help eliminate most or all of it by soaking the Wick in a solution of 2 teaspoons of white vinegar

and one gallon of water for 20–30 minutes. Rinse thoroughly in cool

water. Allow excess water to run off and dry before replacing in the Base. DO NOT wring.

AUTOMATIC REFILL PROGRAM

Select the shipment interval and Vornado will send replacement Wicks automatically. Eliminate the hassle of remembering to

reorder. Maintain the high efciency of your Vornado humidier.

To sign up, visit vornado.com, email consumerservice@vornado.com or call 1-800-234-0604. Cancel anytime.

Part # MD1-0034

Page 13

CLEANING

Proper cleaning of your Evaporative Whole Room Humidier is essential to the air quality and performance of your humidier. The frequency in which your humidier will need to be cleaned will vary depending on use,

water hardness and outside environmental factors. It is recommended, assuming average use, to thoroughly clean the unit several times throughout the season, or when algae, mineral deposits or other particles begin to form. Note: If the humidier is turned Off with water in Base and

not turned back on for 8 hours or longer, or if humidier is not cleaned as

recommended, you may experience some growth of algae or bacteria. These microorganisms may become airborne.

TO CLEAN BASE

1. Turn humidier Off and unplug.

Warning: Do not submerge

humidier top in water.

2. Remove humidier body from

base by lifting up.

3. Remove the Wick and

Water Tank.

4. Unlock wick support

frame lock tab by rotating tab counterclockwise. Gently detach wick support frame from the base by releasing the lock

tab located inside the base.

5. Empty the Base. Clean Base and wick support frame with warm water and a mild detergent. Rinse and dry.

6. Reassemble humidier. Ensure power cord is locked at into

power cord tab located inside the power head and the wick support frame is locked into base tab.

Note: The Base and wick support frame are not dishwasher safe.

English

Page 14

CLEANING

Note: On occasion the Water Tank may need to be wiped down or cleaned to remove build-up of impurities with a mild detergent and cool water. Do not use gasoline, thinners, solvents or other chemicals for cleaning. The Water Tank is not dishwasher safe.

TO CLEAN GRILL

1. Turn humidifer Off and unplug.

Note: Do not use gasoline, thinners, solvents or other chemicals for cleaning.

2. Using a Phillips Head screwdriver, remove screw located at 6 o’clock position inside grill.

14 English

3. Twist grill counterclockwise

to unlock, then use screwdriver to lift grill.

4. Clean the grill, blade or underside of motor with a soft cloth or with a can of compressed air.

5. Reinstall grill and twist grill clockwise until screw holes align. Replace screw.

Page 15

CLEANING

20 min.

1 tsp.

Chlorine

Bleach

IN THE EVENT YOU WANT TO DISINFECT THE BASE:

1. Mix solution of 1 teaspoon chlorine bleach and 1 gallon water.

Fill Base with solution, wet all surfaces. The remaining solution

can be used to rinse or soak the wick support frame.

2. Let stand 20 minutes, then empty.

1 gal.

Water

3. Rinse Base and wick support frame with water until bleach smell

is gone. Dry with clean cloth or paper towel. You may also wipe down the entire surface of humidier with a soft cloth.

English

Page 16

STORAGE

TIPS

During the off-season or after extended periods of non-use, you

may choose to store your humidier. To ensure long life of the product, it is recommended to store your humidier by following

these instructions:

Cleaning is recommended before storage.

1. Unplug power cord and bundle loosely.

2. Let humidier dry completely before storing. Do not store with

water inside Water Tank or Base. Remove and discard Wick if it

is not suitable for reuse. Do not store humidier with wet Wick. If

Wick is suitable for future use, remove and empty water from Base and Water Tank. Replace Water Tank, power On and select HIGH

Fan Speed. Allow humidifer to run until Wick is completely dry.

3. Cover, or place back in retail carton if

available. This will prevent humidier

from accumulating dust over time.

4. Store humidier in cool and

dry location.

Be aware of several things as your Vornado® Evaporative Whole Room

Humidier operates:

 If you operate your humidier continuously (which is recommended

to maintain humidity all day), it may need to be relled with water

every day. Check the Water Tank to be certain that there is an adequate water supply for operation.

 Allow for optimum airow by keeping the grill unobstructed.

Ensure curtains and other items are far enough away from the unit

to not be pulled into the side inlets or interfere with airow.

 Any additives, such as aroma fragrances or water conditioners,

must not be used. These additives can cause cracks in the plastic

of the humidier and may affect performance. Any use of such

additives voids the manufacturer’s warranty.

DISPOSAL

Dispose of all packaging materials in an environmentally responsible manner.

16 English

Page 17

TROUBLESHOOTING

POSSIBLE CAUSE AND SOLUTIONPROBLEM

Unit fails to power on.

Unit makes bubbling or gurgling sound.

Unit is not producing

desired amount

ofhumidity.

Wicks are in need

of replacement toooften.

Unit is not plugged in. Plug power cord into electrical outlet.

Household circuit breaker/ground fault circuit interrupter has tripped or blown fuse. Reset circuit breaker/ground

fault circuit interrupter, or replace fuse. For assistance, contact licensed electrician.

Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.

This is normal. Water is being dispensed into Base.

Water level in Tank is empty or too low. Rell with clean, cool tap water. See HOW TO USE for instructions.

Unit has reached its set point. When set humidity level is reached, the Fan will turn off until humidity level in

room drops below humidity set point.

Airow is blocked. Remove obstruction.

Unit settings are too low. Set to High Fan Speed and Continuous Humidity for maximum humidity output.

The additional sodium in chemically softened water may cause Wicks to harden. Try using untreated tap water or distilled water.

Try adding Bacteriostat or Water Treatment, found at most hardware or home specialty stores to the water.

English

Page 18

WARRANTY

We expect this product to be perfect. If you’re not satised with this product, let us know.

Vornado EV100 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual