Vornado CR1-0094-42 User Manual

TM

Owner’s Guide

READ AND KEEP THESE IMPORTANT INSTRUCTIONS

Guide de l’utilisateur

LIRE ET CONSERVER CES INSTRUCTIONS IMPORTANTES

Guía del propietario

LEA Y TENGA EN CUENTA ESTAS INSTRUCCIONES IMPORTANTES

models V6, V8, V10

Designed, engineered and supported in Andover, Kansas.

Questions or comments?

www.vornado.com

[e-mail]

1-800-234-0604

Trust.

It is said that trust isn’t given, but earned. For decades Vornado has been earning the

trust of our customers by offering them only the best. Vornado provides the highest
level of performance, coupled with the highest level of support available. Complete

satisfaction with no exceptions – this is Vornado’s promise to you. If you are not satisfied

for any reason, please contact us. Knowledgeable representatives are available at

1-800-234-0604 from 8:00 AM to 5:00 PM CST. A wealth of additional support is also

English 2

available online at www.vornado.com.

available online at ww

IMPORTANT INSTRUCTIONS

Your Vornado Air Circulator has a polarized plug. (One blade is wider than the other.) To
reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to defeat this safety feature.

WARNING – To reduce the risk of fire or electrical shock, do not use this product with
any solid state speed control device. To reduce the risk of fire or electric shock and injury

any solid state speed control device. To reduce the risk of fire or electric shock and injury
to persons, do not use in a window.

WARNING – This is a fan - not a toy and not intended for children. To reduce the risk of
personal injury and electric shock, the Flippi fan should not be used, operated or placed
where children can reach it.

This product employs overload protection (fuse). A blown fuse indicates an overload or
short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the

short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the
fuse as per the user servicing instructions (follow product marking for proper fuse rating)
and check the product. If the replacement fuse blows, a short-circuit may be present and
the product should be discarded or returned to an authorized service facility for
examination and/or repair.

Do unplug your circulator before cleaning.
Do clean your Vornado Air Circulator regularly.

Do

Refer to the CLEANING instructions provided. Never clean the air circulator in any
manner other than as instructed in this manual.

Do use common sense when using this product and/or any electrical appliance.
Do use caution when positioning this product on an elevated surface, as vibrations or

accidental bumping may cause the fan to unexpectedly fall.

Do Not use gasoline, thinners, solvents, ammonias or other chemicals for cleaning.
Do Not immerse this product in water or allow water to drip into the motor housing.

Do Not
Do Not use near furnaces, fireplaces, stoves or other high-temperature heat sources.
Do Not position this product too close to draperies because they may be drawn into the

rear grill, cutting off airflow.

Do Not use this product outdoors.
Do Not use this product on wet surfaces.
Do Not use this product in a bathtub or shower.
Do NotDo Not operate any fan with a damaged cord or plug. Discard fan or return to an

authorized service facility for examination and/or repair.

Do Not carry this product by the cord, or use the cord as a handle.

English 3

Do Not attempt to repair or replace parts.
Do Not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar

coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic
area and where it will not be tripped over.
Do Not operate the fan while closed in the nested position as it will not circulate the air.

Grasp plug and remove from the receptacle or other outlet device. Do not unplug by
pulling on cord.

Open fuse cover (A.) by sliding access cover on top of attachment plug towards blades.
Remove fuse carefully (B.) by gently prying out the ends of the fuse from the receptacle.
Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse. Contact Vornado customer

service for replacement fuse. Phone: [phone], email:
[e-mail]

Install replacement fuse (C.) by first placing the end of the fuse into the fuse receptacle
which is opposite of the blades of the plug, then carefully push in the other end. Only
push against the metal end of the fuse, not the glass center portion.

push against the metal end of the fuse, not the glass center portion.
Close the fuse access cover (D.) by sliding the cover back into the plug until it is

completely closed, latches and is flush with the face of the plug.
Risk of fire. Do not replace attachment plug. Contains a safety device (fuse, AFCI, LCDI)

that should not be removed. Discard product if the attachment plug is damaged.

English 4

User Servicing Instructions

C.

D.A. B.

How to Use

Your Flippi™ air circulator is completely assembled and ready for immediate use. Simply
plug in Flippi and enjoy its cooling effect. Thanks to Flippi’s small size and easy use, it can
be used to provide a cool breeze in almost any space. Flippi was engineered to provide
just the right amount of air, either directed at you to create a nice breeze, or away from
you to create swirling currents of air, rejuvinating your personal space.

Fan Speed

Models V6 and V8 come with two speed settings; set to "I" for Low
speed, "II" for High speed, and "O" for OFF. Model V10 has 3 speeds,
set "I" for Low, "II" for Medium,"III" for High, and "O" for OFF. Select
the speed that gives you just the right amount of air, from a whisper
quiet gentle breeze to a powerful rush of air.

Oscillation

Direct Airflow

Models V8 and V10 feature oscillation for more airflow possibilities.
Oscillation on the V8 and V10 can be turned on or off with the rocker
switch on the back of the base of the unit. Press (I) to turn oscillation
ON and (O) to turn oscillation OFF.

The power head can be adjusted to various angles for additional
airflow options. For a clean and unobtrusive look when not in use, the
head can be pointed straight down into the "nested" position. Do not
operate the fan when in the nested position, as no air will be circulated.
Position Flippi away from objects that may block airflow from the back
or from the front. If using Flippi on an elevated surface, use caution in
positioning it to minimize the possibility of it falling from that surface.

positioning it to minimize the possibility of it falling f

English 5

Care and Maintenance

The motor is permanently lubricated and requires no oiling. Because
your Flippi moves air it will require regular cleaning. Be sure to
unplug the unit prior to cleaning. To clean, wipe off with a soft cloth,
or vacuum the outside surfaces. The fan has no user serviceable
parts inside and cannot be opened for cleaning.

English 6