Vornado B2115077 User Manual

Page 1
Page 2
Page 3
MODELS 5303DC, 6303DC, 7503DC OWNER’S GUIDE
GUÍA DEL PROPIETARIO DE MODELOS 5303DC, 6303DC, 7503DC, GUIDE D’UTILISATION – MODÈLES 5303DC, 6303DC ET 7503DC,
モデル 5303DC、6303DC、7503DC 取扱説明書
CONTENTS
Important Instructions ........................................................................2
Features ..............................................................................................6
Controls ...............................................................................................7
How To Use ......................................................................................... 8
Remote Control ...................................................................................9
Grill & Blade Removal ....................................................................... 10
Cleaning ............................................................................................ 11
Troubleshooting ............................................................................... 12
Español p. 13 Français p. 25 简体中文 p. 37 繁體中文 p. 47 한국어 p. 57 日本語 p. 68
English
1
Page 4
IMPORTANT INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
INTENDED USE: This product is intended to circulate the air in
indoor living spaces only. This product is not intended for commercial or industrial uses.
This owner's guide and any additional inserts are considered part of the product. They contain important information about safety, use and disposal. Before using the product, please familiarize yourself with all operating and safety instructions. Please keep all documents for future reference and pass these documents on, together with the product, to any future owner.
The following Warning messages are throughout this owner's guide:
DANGER
Indicates a hazard with a HIGH level of risk which, if not avoided, will result in death or serious injury. Please pay special attention to any instructions given to avoid this threateningly dangerous risk.
WARNING
Indicates a hazard with a MEDIUM level of risk which, if not avoided, could result in death, serious injury, minor or moderate injury or potential property damage.
IMPORTANT INSTRUCTIONS
Indicate additional information that will assist in the care of handling of the device.
The manufacturer assumes no responsibility for damage or injury caused by failure to follow these instructions, improper product use, or unauthorized product modification. Any such actions will invalidate the product warranty.
WARNING – When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
WARNING
Risk From Unintended Use and Handling. Please take care to follow these guidelines to avoid risks to people or property:
- Do Not tamper with or modify this product in any way.
- Do Not use this product outdoors or directly exposed to weather.
- Do Not use this device in tropical humid climates. If the product is
brought in from the cold to a warm area ( e. g., during transport), condensation can occur within the unit. Let the device reach room temperature, before using it.
- Do Not use this product on wet surfaces. Do not use this product in
a bathtub, shower or locate product where it may fall into a bathtub, laundry, swimming pool or other water container.
- Do Not immerse this product in water or allow water to drip into the
motor housing.
- Do Not use this product near furnaces, fireplaces, stoves or other
high-temperature heat sources.
2 English
Page 5
- Do Not position this product too close to draperies or other loose
fabrics as they may be drawn into the product, cutting off airflow and damaging the motor.
- Do Not carry this product by the cord, or use the cord as a handle as
it can damage internal wiring. Do not unplug product by pulling on cord or place the cord under strain. To unplug, grasp the plug, not the power cord.
- Do Not run cord under carpeting. Do not cover cord with throw
rugs, runners or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over. To avoid a tripping hazard, safely coil/store the power cord.
- Note: This unit requires one (1) lithium coin cell battery (CR2032), 3 Volt (included). DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.
DANGER
Risk From Electrical Shock. Contact with wires or components that are under voltage could be potentially fatal:
- Do Not touch the product with wet or damp hands.
- Do Not operate any product with a damaged cord or plug or after the product malfunctions, has been dropped or damaged in any manner. Discard product, or return to authorized service facility for examination and/or repair in order to avoid a hazard.
- If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
- Do Not stretch the power cord or put the cord under strain.
- Do not insert or allow foreign objects to enter any input or output opening as they may cause risk of electric shock or fire or damage
the product.
- Turn off all controls before unplugging. Unplug from wall outlet if not in use for extended periods of time.
- Do Not open appliance housing. To avoid risk of shock, all service and/or repairs must be done by a Vornado Authorized Service Center. Only original replacement parts may be used.
- This appliance (US MODELS ONLY) has a polarized plug. (One blade is wider than the other.) To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do Not attempt to defeat this safety feature.
- For safety reasons, always unplug the unit in the event of a thunderstorm.
WARNING
Risk From Improper Installation. Please take care to follow these guidelines to avoid risks to people or property:
- Ensure that wall power outlet is easily accessible so unit can be disconnected during an emergency.
- To reduce the risk of fire or electrical shock, do not use this product with any external (solid state) speed control device.
- To reduce the risk of fire or electric shock and injury to persons, do not use in a window.
WARNING
Risk to Children and Other At-risk Groups of People:
- This appliance can be used by children ages 8 years and above and
English
3
Page 6
IMPORTANT INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.
persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be conducted by children without supervision.
- This product and its packaging material are not toys and should be kept out of reach of children.
WARNING: KEEP NEW AND USED BATTERIES AWAY FROM CHILDREN. The remote control supplied with this product contains a button cell battery. Leaking or damaged batteries can cause burns on contact with skin. The battery could potentially be a choking hazard for children. If the button cell battery is swallowed it can cause severe internal burns in just 2 hours and can lead to death. If you think the battery may have been swallowed or placed inside any part of the body seek immediate medical attention. In the US call the National Poison Control Center at 1-800-222-1222 or 202-625-3333. In Canada call 416-813-5900.
USA Models Only
This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user
User Servicing Instructions
Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. Open fuse cover (A.) by sliding access cover on top of attachment plug toward blades. Remove fuse carefully (B.) by gently prying out the ends of the fuse from the receptacle.
Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse. Contact Vornado customer service for replacement fuse. Phone: 1-800-234-0604 email: consumerservice@vornado.com
Install replacement fuse (C.) by first placing the end of the fuse into the fuse receptacle, which is opposite of the blades of the plug, then carefully push in the other end. Only push against the metal end of the fuse, not the glass center portion. Close the fuse access cover (D.) by sliding the cover back into the plug until it is completely closed, latches and is flush with the face of the plug. Risk of fire. Do not replace attachment plug. Contains a safety device (fuse, AFCI, LCDI) that should not be removed. Discard product if the attachment plug is damaged.
A. B. C. D.
4 English
Page 7
FCC WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment may generate, use and/or radiate radio frequency energy that may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to contact your Authorized Service Center.
SAVE THESE INSTRUCTIONS
Please keep all documents for future reference and pass these documents on, together with the product, to any future owner.
DISPOSAL
Dispose of all packaging materials in an environmentally responsible manner.
English
5
Page 8
FEATURES
DIRECTABLE AIRFLOW
Direct the airflow where you want it.
ENERGY-SAVING TIMER
1–12 hour timer.
TOUCH-SENSITIVE CONTROLS (99 SPEEDS)
A speed setting for every comfort level.
CORD MANAGEMENT
Integrated cord wrap.
FINGER FRIENDLY DESIGN
Resists curious fingers.
REMOTE CONTROL
Convenience at your fingertips.
6 English
SILICON FEET
Non-marking feet added for stability.
Page 9
CONTROLS
TIMER BUTTON
POWER ON/OFF
SPEED/TIMER INDICATOR DISPLAY
SPEED/TIMER ADJUSTMENT BUTTONS -/+
English
7
Page 10
HOW TO USE
1. Touch
2. Select desired speed by pressing
Press and hold or down in 5 speed increments. Speed is indicated by number shown on Speed/ Timer Indicator Display.
3. Press
illuminates and Speed/Timer Indicator Display flashes
Adjustment Mode. While in this mode, select amount of time in one-hour intervals by pressing -/+. After three seconds, flashing stops and display shows hours to indicate timer is set. The display returns to the last speed selected. Touch
remaining on the timer.
to power on.
Your circulator returns to last saved memory setting.
-/+.
-/+ to adjust speed up
to activate timer. The
0 to indicate Timer
to quickly tell how many hours are
4. To adjust timer, repeat Step Three.
5. To cancel timer, repeat Step Three and
set timer for
CORD MANAGEMENT
1. Wrap cord around Air Accelerator,
located on back of unit. Secure cord with three clips located at 2, 6 and 10 o'clock positions.
0.
8 English
Page 11
REMOTE CONTROL
TIMER
Screwdriver required.
Your circulator remote includes (1) coin style 3V CR2032 battery. Battery comes pre-installed. Remove battery pull tab before first use.
1. For battery replacement, the remote
requires one coin style 3V CR2032 battery. Always use the correct size and grade of battery for this product.
2. To replace battery, open battery door on
the back side of the remote control (you will need to loosen the small screw on door using a #1 Phillips screwdriver). If necessary, clean the battery contacts and also those of the device prior to battery installation. Remove any plastic protection from the battery and place it in the
remote with the the battery is installed correctly with regard to polarity. Replace the battery door and screw.
Note: Remove battery from the remote control when not in use for an extended period of time and always remove dead battery immediately and replace with fresh. Do not store dead battery in remote.
+ side facing out. Ensure
POWER
SPEED/TIMER ADJUSTMENT -/+
The remote control functions are the same as the control panel on the circulator.
The remote requires a line-of-sight path to allow for the signal to be received by the circulator. Point the remote control at the display panel for best reception.
English
9
Page 12
GRILL & BLADE REMOVAL
(USA ONLY)
WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing blade.
REMOVABLE GRILL (USA ONLY)
1. Using a phillips head screwdriver, remove grill by unscrewing the
4 screws located along the perimeter of the inlet grill at roughly 2, 5, 7, and 11 o’clock positions. This will release the grill. To reattach, position grill so the logo in the center of the grill is straight. Align the Locator Pin to reconnect grill. Once aligned replace screws.
2. Dust or wash with a mild dishwashing soap. Do not place grill in
the dishwasher. The excessive heat can distort the plastic.
BLADE REMOVAL (USA ONLY)
1. It is possible to remove the blade should something accidentally get wrapped around the motor shaft. First, remove the nut from the shaft. Turn the nut clockwise to loosen. Pull the blade straight out from the shaft. When replacing, the blade can only go on the shaft one way. Be certain the flat side of the shaft aligns directly with the corresponding flat side on the blade’s socket. Push the blade all the way on the shaft until it bottoms out. Do not use a hammer as this could result in bearing damage. Reinstall nut.
Screw
Screw
ScrewScrew
Locator Pin
2. Wipe blade with a damp cloth. If your Air Circulator is used in a greasy environment, such as a kitchen, mild soap or a common household cleaner may be necessary. Do not use solvents.
10 English
Page 13
CLEANING
Because your product moves a substantial amount of air, it will need regular cleaning to remove lint, dust and grime. Never clean the product in any manner other than instructed in this owner's guide.
WARNING
Observe the following safety information to avoid risks and property damage.
Do unplug your product before cleaning. Do Not use gasoline, thinners, solvents, ammonias or other
chemicals for cleaning.
Do Not attempt to repair or replace parts.
The motor is permanently lubricated and requires no oiling.
1. Dust or wipe the circulator with a damp cloth.
2. Use the brush attachment on your household vacuum cleaner to
vacuum any accumulated dust.
English
11
Page 14
TROUBLESHOOTING
POSSIBLE CAUSE AND SOLUTIONPROBLEM
The unit fails to power on.
Airflow is weak or slow.
GFCI has tripped.
Remote control is not working.
12 English
Unit is not plugged in. Plug Power Cord into electrical outlet.
Ensure unit fan speed setting is selected.
Plug fuse has blown (USA Models Only). Replace fuse (See USER SERVICING INSTRUCTIONS on page 7).
Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.
The outlet is worn or damaged. Try another outlet or contact a qualified electrician.
Unit set to a low speed setting. Adjust to a higher speed setting.
Airflow is blocked. Remove obstruction.
Adjust direction of airflow towards the user.
Under certain conditions, it is possible for a reset GFCI (Ground Fault Circuit Interrupter) outlet to trip when the user is changing speeds on a Vornado circulator. In this event, change to an outlet that is not connected to a GFCI device. It could also indicate a weak or defective GFCI outlet. Contact a qualified electrician to check the GFCI outlet.
The battery is dead. Replace with (1) new 3 volt CR2032 battery. (Refer to REMOTE CONTROL.)
The remote requires a line-of-sight path to allow for the signal to be received by the unit. Position the unit so the receiver lens (located inside the display panel) is visible from the remote control.
Page 15
Page 16
Loading...