Page 1
VOOK
EVD042, EVD 082 & EVD162 Version 2.05
H.264
EVD SERIES
Digital Video Recording
EVD042, EVD082, EVD162
USER MANUAL
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
2
INDEX
Chapter one Products Introduce ........................................................................... 3
1.1 Technical Parameter ................. ...................... ....................... ....................... .................... 3
1.2 Performance .......................... ....................... ....................... ...................... ...................... 4
Chapter Two Hardware ........................................................................................... 6
2.1 H.264 standalone 4CH/8CH/16CH DVR ................ ....................... ....................... ............. 6
Chapter Three Operation ...................................................................................... 11
3.１Operation instruction ................. ...................... ....................... ....................... ................. 11
3.2 Powering On ................ ....................... ....................... ....................... ....................... ...... 13
3.3 Shutdown ...... ....................... ....................... ...................... ....................... ...................... 15
3.4 Multi Channel ....................... ...................... ....................... ....................... ...................... 15
3.5 Preview . ....................... ....................... ....................... ....................... ....................... ...... 16
3.6 Recording operation ......................... ....................... ....................... ....................... ....... 16
3.7 Playback video ..... ....................... ....................... ....................... ...................... ............... 17
3.8 How to control PTZ ..................... ....................... ....................... ...................... ................ 18
3.9 Alarm control ........ ....................... ....................... ...................... ....................... ............... 20
3.10 Display Adjust ........................... ....................... ....................... ....................... ............... 20
Chapter Four Menu Operation Guide .................................................................. 22
4.1 Recording Setup ........................... ....................... ....................... ....................... ............ 22
4.2 Camera . ....................... ....................... ....................... ....................... ....................... ...... 24
4.3 Network Setup ..................... ....................... ...................... ....................... ....................... 26
4.4 System Setup .............. ....................... ....................... ....................... ....................... ....... 31
4.5 System Management............................. ...................... ....................... ....................... ..... 35
Chapter Five IE Preview ....................................................................................... 37
5.1 logging on interface ..... ....................... ....................... ....................... ....................... ....... 37
5.2 System Settings ................... ...................... ....................... ....................... ...................... 39
5.3 State control ................................ ....................... ....................... ....................... .............. 41
Chapter Six Instruction for mobile monitor ........................................................ 44
6.1 Asee ..................... ....................... ....................... ....................... ....................... .............. 44
6.1.1 Instructions of Android ................. ....................... ....................... ...................... .......... 45
6.1.2 Instructions of Blackberry ................................ ....................... ....................... ............. 50
6.1.3 Instructions of iPhone ........ ....................... ....................... ...................... .................... 54
6.1.4 Instructions of Symbian ................... ....................... ....................... ....................... ....... 60
Chapter Seven Instructions of imac ............................................................... 64
7.1 Essential condition ................................ ...................... ....................... ....................... ..... 64
7.2 Installation and operation instructions ..................... ....................... ...................... ........... 64
Chapter Eight FAQ (Frequently Asked Questions) ............................................ 69
Page 2
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
3
...
Power
This DVR select the adaptor is DC12V; please make sure the power supply voltage before use the machine.
If long time do not use the machine, please turn off the power of DVR machine, a nd let the electric plug
away from power socket;
...
safety
This DVR only for indoor use, as for prevent short circuit or electri c danger, please do not let the DVR in the
raining or humid area.
In case any solid or liquid inside the case of DVR, please turn off the power immediatel y, and ask the qualified
technician check it before reboot the DVR;
The DVR is the precisi on machine, there is nothing for repair by c ustomers themselves in it, when it break
down, please ask the qualified technician to check and repair, or contact with the agents of it.
...
Installation
Please keep the DVR in level for installation;
Pay attention to equipment ground;
For the first time to install the DVR, please make sure if the hard disk drive install or not;
Prevent to open the case and change the hard disk drive in electrified;
Propose to select the performance of hard disk drive will be 7200 rotating speed person second;
Please select the appropriate i nstallation si te, so let the air can be free flow inside the DVR, prevent the
machine overheating;
Please do not install the DVR nearby the radiator, air chute etc. heat source,
or where the direct sunlight, too much dust, or mechanical vibration or attack;
Chapter one Products Introduce
1.1 Technical Parameter
Compression standard H.264 baseline profile@L3.1
Video iInput Composite 1.0Vp-p/75Ω,BNC×4/ BNC×8/ BNC×16/ BNC×24/ BNC×32
Video output Composite 1.0Vp-p/75Ω,BNC×1, VGA×1
Resolution Preview D1 704×576（PAL），720×480（NTSC）
CIF 352×288（PAL），320×240（NTSC）
Recording D1 704×576（PAL），720×480（NTSC）
CIF 352×288（PAL），320×240（NTSC）
Recording frame rate
Preview real time frame rate
D1 : 4ch 100fps(PAL) , 120fps(NTSC
D1 : 8ch 100fps(PAL) , 120fps(NTSC)
D1 : 16ch 100fps(PAL), 120fps(NTSC)
Audio input -8dB~22k,RCAx4(4ch)
Audio output -8dB~92dB,RCAx1
Audio decode ADPCM
Alarm input Input low level alarm, user setting normal open or normal close, Varies
according to the model
Alarm output 1ch output or 2ch output; Varies according to the model
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
4
Recording mode Manual recording, timing recording , motion detection recording and external
alarm recording
Simplex/Duplex/ Triplex Triplex (recording, playback , LAN transmission)
LAN RJ45 (10M/100M self-adapting)
PTZ control Yes
Communication RS485×1，USB2.0×2
USB USB mouse control
Hard disk drive SATA up to 2TB
Remote control unit Yes
1.2 Performance
Real-time
monitoring
Turn-by-turn a nalog video output and
VGA interface, according to TV monitor
or VGA monitor to live view in1/4/8/9/16/
or more video channel to monitoring the
recording streaming a nd the record file
capacity in Every hours every channel, to
presentation the status of video channel,
recording, dynamic detection, video loss,
monitoring lock-up. You can view the
system log in local DVR.
Storage
function
Internal 1or2 or 3SATA interface,
MAX
2TB hard disk drive, the file of hard
disk drive include cover mode
circulation recording and none
cyclical
recording, the storage data to use
the proprietary format, can not
falsify the data, make sure the data
safety.
Compression
format
Video compression format:: H.264
Support 8ch video and audio signal,
video and audio maintaining stability in
synchronous.
Backup
function
Through USB interface to backup.
( for example USB drive and mobile
hard disk drive etc.) The video file
can be downloaded by Cli ent
software through LA N to l aptop
hard disk drive.
Recording
and
playback
function
* Multiplex, to achieve real time recording
to be i ndependent at the same time to
single channel playback, research and
backwards, network monitoring, network
search download etc.
* Multiple recording mode: Manual,
normal, alarm, linkage, dynamic
detection recording etc. turn-by-turn
pre-recording function.
* Can playback the record file in DVR
through network, to achieve quick-search
the recording file and recording type,
multiple playback type: SLOW, Fast
Forward, Backwards, step Forward.
Display the e xact time of event occurred
while recording file playback.
Network
Operation
function
* through network to real time
remote monitoring;
* PTZ control
* recording research and real time
playback;
* system setting parameter modi fy
and the system software upgrade;
* remote monitori ng alarm process
and view the system log message;
* to use embedded TCP/IP protocol
and Embedded Operation System,
can acc ess the DVR through client
software program b undle in the
package;
*Management Model: use
enhancement user management,
password mode to make sure the
valid user to login the system,
Page 3
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
5
flexible convenient and fast to set
the different permission user
requirement.
Alarm
linkage
function
8ch alarm input ( alarm event mode can
be set normal open or normal close
selection),and turn-by-turn video loss
alarm, dynamic detection alarm, the
alarm device may be smoke detection
censer, temperature detector, IR
detector. Possess 4ch relay switch
alarm output, flexible convenient and
fast to achieve alarm linkage and
lighting control at site.
They’re possess protective circuit in
Alarm input and alarm output port,
make sure the device not to damaged.
Communication
port
* Possess speci fic interface,
achieve alarm input and PTZ
control;
* possess a standard Ethernet
interface, achieve the network
remote monitoring.
PTZ
control
* Support PTZ decoder through RS485
communicate
* scalable multiple decoder protocol,
easy to achieve to control the pan
driver and speed dome camera
function.
Intelligent
operation
* mouse operation function;
* In menu for same setti ng and to
process shortcut copy operation
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
6
Chapter Two Hardware
2.1 H.264 standalone 4CH/8CH/16CH DVR
2.1.1 Hard disk Installation
For the first use, please install the hard disk
○
,1Remove the screws on both ○,2extracted from the next cover up ○,3connect hard disk and mother
board
sides of shell
○
,4fix the screw of hard disk ○,5close cover ○,6install the screws on both sides of
shell
Page 4
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
7
2.1.2 Rear panel
4CH
Item Interface Description
1 VIDEO IN 4ch video input
2 AUDIO IN 4ch audio input
3 V-OUT 1ch video output
4 A-OUT 1ch audio output
5 VGA VGA monitor
6 NETWORK RJ45 for internet
7 USB
First USB for backup or upgrade system of DVR; Second
USB for mouse
8 ON/OFF Power supply switcher
9 DC-12V Power adaptor port
10
ALARM IN：1 2 3 4 alarm input port
RS-485：A, B
ALARM OUT: N1 alarm output port, every channel connect
GND、OUT、COM;
every two channel OUT, COM port is for GND;
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
8
8CH
Item Interface
Description
1 VIDEO IN 8ch video input
2 AUDIO IN 8ch audio input
3 V-OUT 1ch video output
4 A-OUT 1ch audio output
5 VGA VGA monitor
6 NETW ORK RJ45
7 USB
First USB for backup or upgrade system of DVR; Second
USB for mouse
8 ON/OFF Power supply switcher
9 DC-12V Power adaptor port
10
ALARM IN：IN1-IN4 alarm input port
RS-485：A , B
ALARM OUT: N1 alarm output port, every channel connect
GND、OUT、COM;
every two channel OUT, COM port is for GND;
Page 5
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
9
16CH
Item Interface Description
1 VIDEO IN 16ch video input
2 AUDIO IN 4ch audio input
3 V-OUT 1ch video output
4 A-OUT 1ch audio output
5 VGA VGA monitor
6 NETWORK RJ45 for internet
7 USB/ MOUSE First USB for backup or upgrade system of DVR
；
Second
USB for mouse
8 ON/OFF Power supply switcher
9 DC-12V Power adaptor port
10
ALARM IN：4CH alarm input port
RS-485：A, B
ALARM OUT: N1 N2 for al arm output port, every channel
connect C and O; port is for GND;
8 ON/OFF Power supply switcher
9 DC-12V Power adaptor port
10 HDMI HDMI interface
11 TALK AUDIO TALKBACK
12
ALARM IN：16CH alarm input port
RS-485：A, B RS485-S A,B
ALARM OUT: N1 N2 for al arm output port, every channel
connect C and O; port is for GND;
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
10
2.1.3 Alarm input port
8chanel alarm input, the mode of alarm input is no restriction (possible is normal open also normal cl ose);
the GND alarm detector co nnect to COM under parallel connection (the power of alarm detector s upply by
external power supply;
the ground terminal of alarm detector join-up in parallel with DVR;
the NC of alarm detector connect with the input end (alarm) of DVR;
when you want to reset the remote alarm of triggered , the +12V power supply of alarm detector suppl y by DVR,
for example, smoke detector.
When you select the external power supply, please share the GND with DVR;
Alarm input circuit:
Alarm inlet connection:
2.1.4 Alarm output port
4 way s witching value alarm output, selectable in normally open contact, also selectable in
normally closed
contact, the external
alarm device should
be need Vcc;
Page 6
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
11
Chapter Three Operation
3.
１１１１
Operation instruction
3.1.1 Remote control AND Front panel keypad
Table
：：：：
S/
S/S/
S/
NNNN
KEY
KEYKEY
KEY
pad
Name
Operating
OperatingOperating
Operating
instruction
instructioninstruction
instruction
S/
S/S/
S/
NNNN
Keypad
Name
Operating
OperatingOperating
Operating
instruction
instructioninstruction
instruction
1 【POWER】 Power ON/OFF
8
【
ENTER
】
【OK】
This button is used
as“enter”and“ok” key in most
circumstances
2 【MENU】 Access main menu
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
12
3 【ESC】
Exit operation or enter upper
menu
Close soft keyboard
Close current window
Exit from current control
Return to last menu
Exit from PTZ control under
preview state
9 【PTZ】
Access/exit from PTZ control
under preview state
4
【 】
Slow playback,1/2×, 1/4×,
1/8× and single frame play
10 【+/-】
Volume or number
increase/reduction Select item
of the list
5
【 】
Fast playback, 2×,4× and 8×
playback
11
【
ZOOM
IN/OUT】
Lens control
12 【0~9 10+】
Digital input Corresponding;
Channel is magnified in full
screen under preview state
13
【FN】
Short cut
6
【 】
Playback stop 14
【 】
Switching of
1/4/8/9/16/24/32Preview mode
【 】
Play / Pause
15
【
ALARM】 Alarm reset
【
▲.▼.
】
Four-way to move the f ocal
point in main menu, up and
down to move in the normal
window, to control pan driver
to move in
the PTZ control windows
【
REC】
To mode of recording 16 【CLEAR】 Clear alarm
7 【SEARCH】
Search for playback time
choosing
3.1.2 How to use mouse of DVR (for right hand mouse)
1 Left key single click
To any function menu icon click the mouse left key into the menu
To run the control point out operation
Change again select frame or motion detection piece mode
Click the assemble frame popping to pull down the list
In the input frame, can select digit, character, lowercase, block letter, left click
mouse on the keyboard of character input, that’s. ← say move back, ＿ say
blank，Shift say switch case .
Page 7
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
13
2 Right click mouse
Right click mouse, popping the shortcut menu, as follows;
。
Through the me nu can be switching preview screen window mode, start
replays, PTZ control. Four pictures playback mode, the point of the right mouse
button, Can in a single picture, four pictures, eight pictures (8 road playback), 16
screen (16 road playback), twenty four picture,thirty
two picture,
broadcast control switch view show or hide broadcast control bar.
3
Double click left
button
To run the ActiveX Control ActiveX special operation, For example, double click
the certain item of record listed file, then the system will playback the segment
record video.
4
Dragging the mouse
Depress the l eft key and dragging the mouse, ba nding select Motion detection
area, depress right key of mouse and Dragging, cancel the banding select area.
Dragging playback ProgressBar back and forth to dolly moves, to achieve the
playback position adjustment. Dragging the audio and video reg ulation
parameter bar dolly moves, to achieve the parameter adjustment.
3.2 Powering On
Boot-strap
If【POWER】pilot lamp off, please follow the operation step by step:
First step: if the power does not plug into, please plug into the power, then the DVR begin to start, by now, if the
DVR still inactive, to enter the next step;
Second step: turn on the power supply of the DVR at the back panel, DVR begins to start.
If【POWER】pilot lamp to offer RED, press the 【POWER】key, DVR begins to start.
The video output mode of DVR ’s the default setting i s multi picture channel mode after starting the DVR , i f the
time of start the DVR is in the Timing Recording Setting, the DVR will automatically to start the Timing Recording
function, the corresponding channel’s recording pilot lamp will be light, the DVR is normal operation.
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
14
Button
Description
Button
Description
Main Menu
PTZ control
Wizard language
Alarm control
Multi channel
Display setup
Recording Control
Exit
Playback Back up
If before starting, the system not to install hard disk, into the system, will tip: system didn't detect any hard disk
connection!
Note:
In this dialog you can select language and quickl y set various of parameters.
Page 8
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
15
3.3 Shutdown
There are two safety mode for Shutdown
Enter【Exit】,select【Power Down】.
Abnormal shutdown
Through the rear panel to shutdown
During the DVR running, directly to turn off the power through the rear panel power switch, please avoid as much
as possible to do it. (specially while the DVR recording).
Directly to pull up the power cable of DVR
While the DVR running, directly to p ull up the power cable of DVR, please avoid as much as possible to do it.
(specially while the DVR recording).
Caution: In some area, the power supply is irregulari ty, it will cause the DVR working not normal-operation, the
DVR will be damaged in serious. In this surroundings, suggest select the stabilized voltage supply.
3.4 Multi Channel
1/4/8/9/16/24/32 preview screen mode switch
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
16
3.5 Preview
After log in system of DVR, system will automatically directly enter the preview mode
In the preview picture, you can see the overprint date, time, channel name, if the date and time is not correct show on
the picture, re setting the date. There is a alarm input mode icon. (the meaning of every kind of icon as following
table)
Channel picture attention
3.6 Recording operation
Customer can according to select the different kind of recording mode in this system. For the
different kind of recording mode you set, the channel will be showed the mark on everyone channel.
Manual recording
Note: Manual recording operational require ment the user should have “re cording” permission.
Please make sure the hard disk drive has been installed and it has been formatted.
1
））））
Input manual recording operation menu
Single click right key of mo use or In main menu=> recording control can into manual recording operation menu.
Under preview mode, press REC key or on the Remote controller unit key into r ecording control operation menu, as
follows:
2) The explanation of manual recording operation menu
【
manual recording】 Priority level highest, no matter currently what status of every channel, after carry out the
manual press, corresponding channel will be record common in progress;
【
Auto recordi ng】Setting c hannel recording by setti ng co ndition to record under Timing, Motion detection and
Alarm in Recording Setting;
【
Stop Recording】All video channel stop recording;
1
Channel is video when channel
video pictures showed this symbol
2
Channel happen w hen dynamic
test, channel video pictures
showed this symbol
3
Channel happen when channel
video cover alarm pictures
showed this symbol
4
Channel open sound, the channel
video pictures showed this symbol
Page 9
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
17
3.7 Playback video
Button Description Button Description
Synchronous/asynchronous play Voice adjustment
frame by frame
1/4/8/9/16/24/32
screen(switch image)
Speed slow
Hide / display list
Speed normal recording date
Speed fast Play/pause/stop
Sound off/on rewind
Note:
1) During playback the Playback Tool will show the file playback speed, channel, timing, playback speed etc.
information in the Playback control panel;
2) Can’t same time to select the Fast forward operation function in over 2 channel, only progress in anyo ne channel;
3) Can drag the Playback Speed toolbar by mouse;
4)In this dialog you can select the video precise to the second.
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
18
3.8 How to control PTZ
【
Zoom】Lens in the current play far closer picture, use the mouse wheel also can undertake variable ti mes control.
【
Focus】Slight adjusting the focal length
【
Iris】Aperture size adjustment
【
Speed】Through the slider adjust rotation stepinterval, y untai mainly used to control direction operation, the step
length of turning the faster yuntai.
【
Preset】Adjust the camera Angle, then direction and the corresponding input and clicking on [ set] button, preset
dots to set the dots in the preset rastelli.
Input presets dots and cli ck on [Transfer] button, the camera will be transferred to the preset point corr esponding
position.Click[remove ] button, this presets dianjiang be cleared
Page 10
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
19
【
Set】Click 【Start Tour】 the trajectory of said no corresponding, click the 【 add Preset 】 and 【 delete Preset
point 】, 【Clear Tour】 the cruise lines.
【
Start Tour】begin to track record, was registered date 【 end Tour】，thus set up from the corresponding track
circuit.
【
Left Limit】Began to limit scanning Settings, was registered date 【 right Limit 】, thus set up corresponding limit
scanning.
【
Add Preset】Add presets point to the cruise lines.
【
Delete Preset】Cruise lines from deleting preset points.
【
Clear Tour】Remove the cruise line designated.
Note
: some equipment doesn't fully support all function, depending on the specific yuntai equipment and different.
【
Control】PTZ Control
【
Tour Scan】Point between cruise control.
【
Pattern Scan】Track patrol control.
【
PTZ Reset】Remove all Settings, original reset to the original state.
【
Limit Scan】Yuntai boundary scan control around.
【
Auto Pan】Remove the cruise line designated
Note
: some equipment doesn't fully support all function, depending on the specific yuntai equipment and different.
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
20
3.9 Alarm control
【
Set Alarm】Selection need protection channel, click confirm corresponding channel after in protection status
【
Clear Alarm】Remove protection condition, not alarm input to react
【
Alarm Output】Open the corresponding alarm output
【
All】Can choose all the channels
3.10 Display Adjust
(1)
Video
【
Video Effect】Optional: standard, downy, sharp, custom.
【
Default】Restoring default effect, for custom video effects, copy standard effect parameters.
Through the slider fluctuation sliding, respectively adjustable brightness, contrast and saturation, tonal, etc.
(2)Monitor
Page 11
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
21
【
Device】Optional: VGA output, TV output etc display output device.
【
Default】Restoring default display parameters.
Through the slider fluctuation sliding, respectively adjustable brightness, contrast and saturation, tonal, etc.
(3)Setup
【
Device】Optional: VGA output, TV output etc display output devices, the system may support multiple equipment
and output.
【
Resolution】Setting the resolution of the display device.
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
22
Chapter Four Menu Operation Guide
4.1 Recording Setup
(1) Recording Setup
【
Channel】Choose the need to install passage "whole" says setting all channels.
【
Image Size】CIF/HALF D1/D1 (only in whole function model)
【
Encoding Mode】Including fixed bit rate, dynamic bit rate.
【
Image Quality】Client-side image quality, the higher the quality the cl earer. Choice scope: minimum, low, general,
high, highest
【
Frame Rate】Can click on the button manually input, 1 ~ 25 frames per second (PAL) or 1 ~ 30 frames per second
(NTSC) continuous adjustable.【Audio】Can select close, open according to requirements
【
Pre-Alarm Rec.】Can select close, open according to requirements
Page 12
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
23
(2)Secondary Stream
【
Channel】Choose the need to install passage "whole" says setting all channels.
【
Image Size】CIF/HALF D1/D1 (only in whole function model)
【
Image Quality】Client-side image quality, the higher the quality the clearer.
【
Frame Rate】Can click on the button to undertake choosing, optional: automatic, 1FPS, 2FPS, 3FPS, 4FPS, 5FPS.
(3)Information Overlay
【
Channel】Choose the need to install passage "whole" says setting all channels.
【
Channel Name】Can manual corresponding input channel's name
【
Channel Display】Can choose according to the requirements of users don't use, the top-left corner, left, lower,
middle and downward, upper, right, and lower.
【
Time Display】Can choose according to the requirements of users don't use, t he top-left corner, left, lower, middle
and downward, upper, right, and lower.
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
24
(4)Recording Schedule
【
Channel】Choose the need to install passage "whole" says setting all channels.
Each longitudinal row of every seven days a week, sai d the 24 hours a day manipulated said, mouse the left key
click on the small square footage, setting time to clean it has chosen right-click drag video time.
4.2 Camera
When the system starts the camera will detect the format of video
(1) PTZ Setup
Page 13
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
25
【
Channel】Choose regional channels, Pelco_D Settings "whole" says setting all channels
【
PTZ Protocol】Pelco_D equipment communication protocol
It contains these options: Pelco_D、Pelco_P、LILIN、MINKING、STAR、VIDO、NEON、DSCP、HY、N-control
、
RM110、SAMSUNG，the default option is Pelco_D.
★Note:
★Note: ★Note:
★Note:
Pelco_D parameter Settings every channel need after completion in Settings of gc1318 alone.
【
PTZ Address】Pelco_D equipment address, digital range 0 to 255.
★Note:
★Note: ★Note:
★Note:
here with the address must be consistent ball machine address, we can't control the ball machine.
【
Bit-rate】Pelco_D equipment baud rate.
(2)Video Setup
【
Video Mode】Provide PAL and NTSC both formats video formats choice, modify after you must restart your system
can take effect.
【
Channel】Choose to set the video Settings area passage "whole" says setting all channels
【
Reserved Section】Click Settings enter. The white areas for privacy area
【
Buzzer Alarm】Happen when video lost choice whether or not to allow buzzer warning
【
Alarm Output】Happen when video lost upcoming linkage selected channel corresponding alarm output
(3)Motion Detection
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
26
【
Channel】Choose need to set up mobile testing area passage "whole" says setting all channels
【
Sensitivity Setting】Can be set to give: minimum, low, general, high, highest
【
Detection Area】Click Settings enter.
Green area for dynamic test, grey areas design. Ferroconcrete-brick undefe nded area for. Press the mouse left key
to drag on the lower detection area to the right, press the mouse button clearance. Detection area drag The save
and exit button can save Settings, some give up and quit button abandon modification.
【
Buzzer Alarm】Occur when dynamic test on the buzzer whether to allow the alarm
【
Trigger Recording】That will happen when dynamic test on the linkage of selected channel fast ball trigger video
【
Alarm Output】In this passage setting user can be copied to the other channels, fulfill the same dynamic detection
alarm Settings
4.3 Network Setup
(1)General Setup
Page 14
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
27
【
DHCP】After checked automatic assignment device will get IP address, subnet mask, the default gateway, the DNS
server, etc
【
UPnP】Can choose according to the requirement
【
IP Address】Network logic address can according to the requirements set
【
Subnet Mask】Server subnet mask
【
Default Gateway】Server gateway
【
DNS Server】DNS server addresses
【
Server Port】Data port, initial socket for 7777
【
HTTP Port】the default port for 80. If change, when using IE browser, need to monitor the IP address, adding new
socket. If use IP address to 82, from the original browsing http://192.168.0.19, change for http://192.168.0.19:82.
【
Handset Port】Network phones socket, initial socket for eight thousand eight hundred and eighty eight
(2)Dial-UP Setup
Tip
: PPPoE dial-up successful, according to 【 PPPoE IP 】 shown on IP address, users can remote access
hard disk video recorder. By nic LAN IP access.
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
28
The dvr support model：
Unicom：huawei E173,zhongxing MF100
Telecom:huawei EC150.huawei EC156.zhongxing MF583
“3G DIAL” have two modes with automatic and manual dialing, the operation follows as below.
1. Automatic Dialing
Select the Automatic Dialing in the i nterface of the following picture, fill the right information according to the
operator where the 3G card belongs to and the 3G referred g uide, It includes IPS names, AP, dial-telephone, ID and
password, the interface shows as the other following pi cture (some IPS once be chosen, t he other relative
information has been already done, so you needn’t fill any more, click “SAVE” directly). Then click “Save” directly.
After having detected the 3G signal when DVR start, the system will dial up automatically.
2. Manual Dialing
In the interface of following picture, users would fill the right information in the menu bar as same as
Automatic dialing and cli ck “SAVE”. Then click “Dial-up” after savi ng s uccessfully (The referred information
would be saved still after the DVR restart, but you should click “Dial-up” again).
In these two modes, if the dial-up want success, first you should make sure that the 3G card is available. Since
the 3G signal has been existed, the related menu bar will show the correct IP address; if failed, system will popup a
window to show the wrong information.
(3)DDNS Setup
Page 15
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
29
【
DDNS Servi ce】Dynamic DNS provider website, Via DDNS server, it compatible with
SODDNS,ANYVISION,PANSIM, DYNDNS.ORG. i f you select so ddns, you can customize your favorite domai n
name. It shows as following picture.
【
DDNS Domain】Dynamic domain name, soft keyboard and hard keyboard can be input.
【
DDNS Account】Login domain name service provider website user name
【
DDNS Password】Login domain name service provider website password
Tip
: through the dynamic DNS server. Support dynamic DNS.
(4)Email
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
30
【
SSL Protocol】Sending E-mail in use safety network connection
【
Test Email】Send an email to the recipient mailbox test
【
Email Address】The recipient's email address. Users can input two different email address.
【
Send Email】The sender email address .
【
SMTP Server】Send mailbox mail server
【
Email Account】The sender email address the corresponding account
【
Email Password】The sender email address of the corresponding email password
According to the customer request can be checked 【input alarm 】and 【 video loss 】 sending emails. Two can
also choose.
Note
: your sender email must support SMTP.
(5)Access Control
【
List Rule】According to the requirement to choose: don't use, allow access, refused to visit.
【
Starting IP】Display IP address started section
Page 16
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
31
【
Ending IP】Display IP address end segments
【
Add】On the basis of the need for added
【
Delete】According to the need to delete
4.4 System Setup
(1)Time
【
System Language】Used in a remote remote device control more hard disk video recorder occasions, only in
remote controls address and hard disk video recorder Numbers identical to remote operation.
【
Device Number】According to the requirement to select the time zones, has twenty six time zone for user Settings.
【
Time Zone】Select the format the date is displayed in including date, sun and moon June 21 years in three formats.
【
Date Mode】To choose time display modes include 24-hour system and 12 hours to make
【
System Date】The current system date
【
System Time】The current system time
【
Daylight-saving mode】According to the requirement to choose
【
Set Time】Confirm modification system of time
(2)HDD Management
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
32
【
Disk Full】When video disk full system how to deal with, "said system will be automatic coverage the earliest video
files continue covering video," stop video "says system to stop the current video.
【
File Time】Says automatic generation video files interval, the set range 5-120 minutes.
【
Recording Bit-rate】Said the total rate of current coding
【
Recording Time】Said the storage devices systems installed in accordance with the current bitrate can store video
of time.
Display the current hard disk attributes: types, hard disk, usable capacity total capacity. Cli ck [formatting ], all
storage file will be lost.
Tip
: to format the hard disk before please stop system current all those videos.
Page 17
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
33
(3)User Management
【
User】Characters in length up to 8 bytes, ignore trailing Spaces. Can be letters, Numbers, and other symbols. The
user has the largest number of eight, user name may not be repeated.
【
User Rights】According to the requirements set of functions need checked
【
Add User】Input need to add user, and input the account password and passwords. According to save button to add
user.
【
Delete User】Select the users need to delete, and click on the "yes" button to remove users
【
Edit User】Choose need to modify user, and in user permissions bar needed under the function of check. According
to the save button modified users.
【
Edit Password】Select the a ccount, input to modify c urrent user password, and enter the account password a nd
confirmation password new. According to the save button for password changing. The password can be set to 0 ~ 8
bits
(4)Alarm Setup
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
34
【
Alarm Input】Choose corresponding alarm channel, "all" setup all channel said.
【
Input Type】Alarm input to often open/closed type choice (voltage output style)
【
Clear Alarm】Stop the current alarm video and alarm output, but not removal, can again trigger alarm.
【
PTZ Relate】When will the linkage happened alarm yuntai control
【
Trigger Recording】When will trigger happened alarm selected channel video.
【
Alarm Output】When will the linkage happened alarm corresponding alarm output
(5)Output Management
【
Buzzer Output】In the chosen time intervals have alarm input will start buzzer output.
【
Send Email】In the chosen time intervals have alarm input which will send relevant information, such as t he alarm
events, paparazzi pictures, equipment name, device ID, etc sent to user specifies the mailbox.
【
Alarm Output】In the chosen time intervals have alarm input will start alarm output
Page 18
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
35
4.5 System Management
(1)System Upgrade
Show the system hardware versions, software version, release dates. Click [software upgrade 】, the system
began to automatically detect and upgrade file.
Note
: equipment currently support upgrades: local USB mode, IE mode, the client software.
USB mode
: former ensure USB device to connect upgrade normal, as upgrade program has copy USB
devices in the root directory. According to the interface can upgrade operation hints.
Upgrade was successful, and the screen appears to restart operating hints. Equipm ent reboot after system t hat
will enable the new software.
(2)Log Search
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
36
【
Date Search】Can search according to date
【
Log Type】Optional: all, operation log, set diaries, alarm log, error log
Note
: according to the left, right arrow can move forward and content.
(3)Default
Restoring default can restore selected according to need. The system restore to the default configuration state
out, can according to the menu options choose to restore the corresponding Settings.
Tip
: menu color, language, time date f ormat, video format, IP address, the user account, etc will not be
restored.
(4)Exception Handling
Page 19
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
37
【
Exception Type】Choose abnormalities: hard disk full, hard disk errors, network connection.
【
Buzzer】When abnormality, choose whether to allow the buzzer hints.
Chapter Five IE Preview
5.1
logging on interface
To input the IP address
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
38
Pretermission IP address is 192.168.0.20
Page 20
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
39
5.2 System Settings
Point , As the picture ,You can set up language directory,After all to save you set.
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
40
Page 21
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
41
5.3 State control
In state control you can set reboot server, close server , remote to go up
Remote upgrade: let PC file load in the system
Log: to inquire sometime the server’s action
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
42
Page 22
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
43
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
44
Chapter Six Instruction for mobile monitor
6.1 ASEE mobile software
This module has mainly instructions on the installation and usage in Android, Blackberry, IPhone mobile phone.
1) The acquisition of client software:
The client software can be got from the CD material equipped with CD , then choose English and select the options
supporting tools, finally choose the mobile phone monitoring or obtained from technical support. Each type of
corresponding client software as follows.
1. Asee.apk: The smart phone monitoring client of Android operating system
2. ASee.cod & ASee.alx: The smart phone monitoring client of BlackBerry operating system
3. ASee.sisx: The smart phone monitoring client of Symbian operating system
Notes：
The mobile phone client of apple mobile phone system (iOS) can be directly searched for ASee+ in the appstore
and installed online.
The mobile phone client of Android system can be directly searched for ASee+ in the Android market and installed
online.
2) The main functions of the program which is straight even version of current mobile phone monitoring are shown as
follows:
1. Browsing real-time video function. In addition to BlackBerry, it can support four pictures at the same time preview.
2. PTZ control function (the controlled ball machine is in front).
3) The instructions of three platforms is shown as follows.
1. Android
2. Blackberry
3. IPhone
4. Symbian
Page 23
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
45
6.1.1 Instructions of Android
6.1.1.1 Essential condition
1) Support the version 1.5 or above of Android system.
2) Support DVR platform versions:
Hisilicon v1.0.1.8 and higher.
GRain v8.33 and higher.
6.1.1.2 Installation and operation instructions
1
）
Installation
Support two installation modes and the user can choose one way for installation.
1. Install online
Search ASee+ on google market and install online. As the below image shows:
2. Install offline
Copy the Asee.apk installation package to Android phone through cabl e. In the specified di rectory find out the
corresponding .apk, click the application installation (If there is not installed apk installer in the mobilke phone, the
user needs to download an apk installation software so that it can identify the apk package), and there will be
program icons after finishing installing. As the above image shows.
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
46
3）Click the program icon <Asee+ >，the first screen after running is shown in the below image.
The functions of buttons show as follows:
Table 1-1
Function keys Definiti on Function specificati on
Play When the program connects with device, play video
Capture
Capture the current screen(the default save path: the default pictures
directory of mobile)
Settings
Set some information of the device, such as IP address, dynamic domain
name, port, username, password and device alias information.
About Some device information of the software
Previous group It can show the previous channels group.
Next group It can show the next channels group.
Select channel
Choose one video channel of the device. And cooperate with "next
group" can switch the 8 or 16 channels.
Page 24
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
47
PTZ control PTZ direction control including up, down, left and right.
Zoom Zoom i n/out control of PTZ.
Focal length Focal length adjustment of PTZ.
Aperture Aperture control of PTZ.
4）If it is first running or need to change t he parameters, please cl ick the <settings> button and enter the
<Device List> page, as shown in the below image.
In <device list>interface, click <Add> button and enter <settings> interface, as shown in the above image
Notes：
<DVR Title>：It is convenient to identify among multiple devices.
<Server>：The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapping
before using public IP and mobile phones need to open wifi before using LAN IP).
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
48
<Port>：The mobile port set in DVR（default parameter is 8888）.
<User Name>
：
The username permitted to login the DVR（default username is ‘admin’）.
<Password>：The password of the user (default password is empty).
<Max Channel>: The actual channel numbers of DVR.
5）After finishing, click <OK>and enter the Device List page. As shown in the below image
Notes：
<Back>：Back to the screen of previewing image.
<Channel List>：It shows the corresponding DVR and the default channel list, the user can arbitrarily
choose a channel to preview image.
<Information Edit>：Click this button and enter the “Settings” interface, you can editor delete the device
information, as shown in the above image
6）Complete settings, choose channel to preview, and the preview function include two modes: common mode and
full screen mode.
1. Common mode is shown in the below image
Page 25
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
49
2. Full screen mode i s that when mobile phone lay down horizontally it will automatically switch to full screen mode,
as shown in the above image
7）Channel switch function
Select some channels in the Device List interface, the program will automatically switch to the Preview Interface and
open the corresponding channel preview in Preview Interface. Program displays the default 1 ~ 4 channels, if the
user clicks the channel button of Next Group in the Preview Interface, the channels group will switch to 5 ~ 8,
8 ~ 12, 12~16 and circulation switch. As shown in the below image
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
50
6.1.2 Instructions of Blackberry
6.1.2.1 Essential condition
1) Support the version 4.6 or above of Blackberry system, and mobile phone screen resolution is 480*360 and
480*320. Support 8900, 9000, 9700, 9630, 9900 of Blackberry.
2) Support DVR platform versions:
Hisilicon v1.0.1.8 and higher.
GRain v8.33 and higher§2.2 Installation and operation instructions
6.1.2.2 installation
1）Install ASee. cod and ASee. jdp installation package into Blackberry handset through the desktop manager,
as shown in the below image.
2）Click the options on mobile phone desktop and enter the interface of the above image.
3) <Asee> permission settings
a. Click <application program> to find out <Asee>；
b. Click the icon of <Asee> and enter the permission settings.
c. Click <edit permissions>, set all permissions <permit>.
Note：Some permissions can not be set < permit>( the gray options mean cannot c hange this option), and
click “save”.
4）Enter the initial interface
Click the program icon <Asee>, after running proc edure there will be an welcome page, then enter the initial
interface, as shown in the below image.
Page 26
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
51
Notes：
<Title>：It is convenient to distinguish between multiple devices.
<Address>
：
The publi c IP address, dynamic domain name or LAN IP of DVR (The port should be mapping
before using public IP and mobile phones need to open wifi before using LAN IP).
<Port>：The mobile port set in DVR（default parameter is 8888
）
.
<Channel total>：The actual channel number of DVR.
<User ID>：The username owners view permissions of mobile phone（default username is admin）.
<Password>：The mobile phone port of DVR (default password is empty).
<Network type>：Choose the network type that you need.
The corresponding functions of buttons show as follows:
Function keys Definition Function specification
login
Enter the playing interface, and the program will connect with device and
begin to play video
exit Exit the program
Device list Enter the device list interface.
5) Click <login>, play the main interface, as shown in the below image.
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
52
The corresponding functions of buttons in <Main interface> show as follows:
Function keys Definition Function specification
Play When the program connects with device, play video
Full screen Play full screen.
Capture
Capture the current image (the default save path: the default pictu
directory of mobile)
About Some devi ce information of the software.
Next group
It can select the next channels group (1-4、4-8、8-16)
or PTZ contr
Select channel
Choose one video channel of the broadcasti ng
device and select
one of 8 channels.
Up control of PTZ The up direction control of PTZ.
Down control of PTZ The down direction control of PTZ.
Left control of PTZ The left direction control of PTZ
Right control of PTZ The right direction control of PTZ
Page 27
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
53
Zoom in The zoom in control of PTZ.
Zoom out The zoom out control of PTZ.
Focal length + Amplify the focal length of PTZ.
Focal length - Lesse n the focal length of PTZ.
Aperture + Amplify the aperture of PTZ.
Aperture - Lessen the aperture of PTZ.
6) Exit the application program
Click the button <Exit> and exit the program, as the below image shows.
7) Edit the <Device List> interface
1. Click the <Device List>and enter <Device List> interface, as shown in the above image.
2. Click the <menu> button and enter the <device edit> interface, as the below image shows.
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
54
The corresponding functions of buttons in < device edit> interface show as follows:
Menu definition Function specification
Set to real-time preview When the program connects with device, play video.
New Device Create a new record.
Edit Edit record.
Delete Delete the selected record.
Delete All Records Delete all records.
Shutdown Shut down the program.
6.1.3 Instructions of IPhone
6.1.3.1 Essential condition
1) Support the version iOS 3.0 or above, and mobile phones includes iPhone, iPod, touch etc.
2) Support DVR platform versions:
Hisilicon v1.0.1.8 and higher.
GRain v8.33 and higher§2.2 Installation and operation instructions
6.1.3.2 Installation and operation instructions
1）Run the App Store program of iPhone
Switch to the search tag page, and input Asee + in the search box to find the applicati on installation package, then
click <install> .After finishing installation, there will be Asee + program icon on the mobile phone desktop, as shown in
the below image.
Page 28
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
55
2）Click the program icon Asee+ and the initial interface after running procedure is shown in the above image.
The corresponding functions of buttons show as follows:
Function keys Definition Function specification
Stop
playing
When the program disconnects with device, stop playing the video.
Capture
Capture the current image (the default save path: the default pictures
directory of mobile).
Settings
Set some information of the devi ce, such as IP address, dynamic domain
name, port, username, password and device alias information.
Channels group switch It can switch to next channels group.
About Some device information of the software.
Select channel
Choose one c hannel video of the broadcasting equipment. And cooperate
with "next group " can achieve the switch of 8ch and 16ch.
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
56
PTZ control PTZ direction control including up, down, left and right.
Zoom Zoom in/out control of PTZ.
Focal length Focal length adjustment of PTZ.
Aperture Aperture control of PTZ.
3）Initial usage of need to change the parameter
1.Please click the settings button and enter the device manage interface, as shown in the below image.
2.Then select Add button and enter device add interface, as shown in the above image.
Page 29
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
57
Notes:
<Device Name>：It is convenient to distinguish between multiple devices.
<Address>：The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapped
before using public IP and mobile phones need to open wifi before using LAN IP).
<Port>：The mobile phone port set in DVR（default parameter is 8888）.
<User ID>：The username permitted to login the DVR（default username is ‘admin’）.
<Password>：The password of the user (default password is empty).
<Max Channel>：The actual channel number of DVR.
3.After finishing, click <OK>, enter <Device Manage> interface. As shown in the below image.
4.In the <Device Manage> page, click the <back> button, enter t he <add channel> interface, then click the <+ >
button , as shown in the above image.
5.Click the <+> button , and switch automatically to <Device List>, as shown in the below image.
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
58
6.Click the button to view all channel numbers, as shown in the above image.
7.Double click any c hannel, then switch to the <channel preview> interface to preview channels, it can support four
channels previewing at the same time, as shown in the below image.
8.Click the <setti ngs> button enter the <Device Manage> interface, as shown in the above image. The user
can edit, modify and delete device information by clicking the corresponding icon or slipping the item.
（1）
Click the <edit> button enter <parameter modifying> interface, as shown in the below image.
Page 30
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
59
（2）
Slide rightly the <edit> button to delete the information. As shown in the above image.
4）Video display mode
There are two modes: common mode and full screen mode
Switch: when the mobile phone lay down horizontally it will automatically display full screen.
common mode full screen mode
5）Channel switch function
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
60
Select some channels in the Device list i nterface, the program will automatically switch to the Preview Interface and
open the corresponding channel preview in Preview Interface. Program displays the default 1 ~ 4 channels, when
elected the channel <Channel switch> button
in the <preview interface>, the channels group will switch to 5
~ 8, 8 ~ 12, 12~16 and circulation switch. As shown in the below image.
6.1.4 Instructions of Symbian
6.1.4.1 Essential condition
1) Support the version OS S60 or above of Symbian system.
2) Support DVR platform versions:
• Hisilicon v1.0.1.20 and higher.
• GRain v8.42 and higher.
6.1.4.2 Installation and operation instructions
Installation
Support two installation modes and the user can choose one way for installation.
1.Install online
Search ASee on google market and install online.
2.Install offline
Copy the Asee.sisx installation package to Symbian phone through cable. In the specified directory find out the
corresponding .sisx, click the application installation (If there is not installed apk installer in the mobile phone, the user
Page 31
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
61
needs to download an apk installation software so that it can identify the sisx package), and there will be program
icons after finishing installing. As the following figure shows.
2）Click the program icon < Asee>，the first screen after running is shown in the following figure
click PTZ show as the following figure
The functions of buttons show as follows:
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
62
Function keys Definition Functio n specification
Play/pause When the program connects with device, play video
capture
Capture the current screen(the default save path: t he default pictures directory
of mobile)
settings
Set some information of the device, such as IP address, dynamic domain name,
port, username, password and device alias information.
Full screen For this channel full screen.
pervious/next Pervious to the former channel ,next to the latter channel
exit quit current software
Select channel
Choose one video channel of the device. And cooperate with "next group" can
switch the 8 or 16 channels.
Ptz PTZ
PTZ control PTZ direction control including up, down, left and right.
zoom Zoom i n/out control of PTZ.
Focal length Focal length adjustment of PTZ.
Aperture Aperture control of PTZ.
Page 32
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
63
3）If it is first running or need to change the parameters, please click the <settings> button and enter the
<Device List> page, as shown in the following figure:
Notes:
1)<server address>：The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapped
before using public IP and mobile phones need to open wifi before using LAN IP).
2)<port>：The mobile phone port set in DVR（default parameter is 8888）.
3)<uer ID>：The username permitted to login the DVR（default username is ‘admin’）.
4)<password>：The password of the user (default password is empty).
5)<alias>：the record’s name
After entering the above information, identify and select play.
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
64
图
6-79
Chapter Seven
Instructions of imac
7.1 Essential condition
1)Support the version OS X 10.6.3 or above of imac system.
2)Support DVR platform versions:
a) Hisilicon v1.0.1.20 and higher.
b) GRain v8.42 and higher.
7.2 Installation and operation instructions
One method:
To unzipped the Asee.app in windows xp os, copy it to the mac machine.and then you will find the icon.
The other method:
Download from App Store,Search for Asee ,find the corresponding program installation package (Asee.apk
installation package), install online.After finishing installation, as the following figure shows:
Page 33
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
65
7.2.1 operation instructions
After installing,click Asee icon to work.
Log on the main menu interface,as the following figure shows
main menu interface
After loading，enter default main menu interface,buttons instruction as show below:
buttons instruction
Button icon corresponding definition function introduction
single picture Single picture shows video channel
4 pictures 4pictures show video channels
disconnect disconnect single picture of connection
disconnect
disconnect all pictures of connection
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
66
Capture
Capture t he c urrent i mage (the default save path: the default
pictures directory of mobile).
full screen
Picture full-screen
add add device
delete Delete device
modify Modify device
Switch pictures on Imac platform，click view->scream mode on the top of the screen to switch pictures from 1/4/9/16
，
as the following figure shows:
picture switch
First login ,preview interface is empty, need to set parameters and add device,after adding device, can pre view,
configuration, modify or delete equipment information ect.
click “add ”,pop-up a message bo x as shown in the follong figure:
Page 34
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
67
add device
The current message box shows the need to enter five information: device name、IP address、port、user ID and
password.
Device name:the name of monitor device,help you distinguish between multiple devices
IP address：The public IP address or dynamic domain name of DVR(here the address must be internet address)
port：The mobile phone port set in DVR，default parameter is 8888
User name：default username usually to be ‘admin’,can be set according to the DVR .
Password：:admin user’s default password is empty，can be set according to the DVR.
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
68
add device
after inputting above information，click“ok”.enter main menu interface,click a picture,after appeari ng green
frame(as shown window 1 in picture below),click a channel on right channel column(such as channel 1 ),co nnect
play，as shown in the following figure
connection play interface
Page 35
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
69
If there is error device information above,click to modify or click ,add the device again.
Note：Asee on Imac platform can only add one device,and there is no PTZ control function.
Chapter Eight FAQ (Frequently Asked Questions)
01：Why the DVR did not run after connect the power supply?
①Please check the power switch turn on or off at the rear panel of DVR.
②Please check if the turn on DVR operation correct or not?
③If you select the adaptor +12V, 5A or above? (8ch 5A, 16ch 220V 200W)
02：Still stop over on the boot-strap frame?
Physical damaged in hard disk drive
Boot manager abnormal.
03：Why does appear the boot running too slow?
①There are too much capacity data in hard disk drive, the system will automatic search the data when
the system boot up, caused the boot running slow.
②The hard di sk drive error will cause the system research the data repeatedl y, caused the boot
running slow.
04：Why does the system reboot repeatedly?
①Check the hard disk drive, if there is not the FAT32 formatted in it or the problem in it and caused the
DVR reboot;
②Please check the power supply of DVR, if you installed a lot of hard disk drive, it may be reboot
repeatedly underpower;
③Please pull up the network cable, t hen to check the DVR can work normally or not, being the
catastrophe failure in network,
it will cause the DVR reboot repeatedly;
05：Why does the system halted of DVR during the playback and search the video file information in progress?
Please check if you install the hard disk drive or if the drive is ok or not? Pl ease replace the good one
for it soon;
If the ambient temperature on the high side or not?
Is there any heaven current installati on surrounding and external video device, heavy current surging
video cable, caused the DVR can not work properly and the system halted;
06：Firmware upgrade failure?
U drive is not good compatible with the DVR, cause the DVR can not detected it, suggested to try one
or two more different kind of U drive in the market;
USB interface is not good;
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
70
The voltage hunting fearfulness during the system firmware upgrade in progress;
07：Why the display color is black and white in TV and VGA monitor?
Check the video system is it matching the video i nput, DVR, TV or VGA monitor, if there is not o n all
fours, please set the video system mode in auto automatic recognition;
08：Why does nothing display on the TV or VGA monitor?
①please make sure if the power supply of TV or VGA monitor turn on or not; if the illumination l ocated
in the lowest status?
②if the video connected with TV or VGA monitor properly? Check if there is any video signal input?
And make sure the line faulty or not?
09：Why does the video like water wave, to appear obstruction distortion?
①if there is short circuit, open circuit or insufficient solder and connection failure of video cable?
②If the video cable obstruction by high voltage interference, please separate the video and high
voltage in linkup cabling, at the meantime, please select the better quality, shield video cable for the project;
③In the whole system, only select the central point to grounding, please do not multi port to grounding,
then, cause the common mode obstruction, please connect the screw in DVR rear panel to grounding;
④Check if there is the become old problem in the camera or TV monitor and cable?
10：Why do the color of live video and record video data distortion?
①Make sure the input and output video parameter of main menu setting correct;
②Make sure the connection is correct;
11：Why does the video skew became deformed, color cast?
①Make sure the VGA cable and DVR be connected with grounding properly;
② The DVR working atmos phere temperature high, or no good in radiating, cause the VGA chipset
working exceptional, or the mention circuit parameter is abnormal;
12：Why does the record video playback in mosaic under local DVR?
①The recording parameter setting is too low cause the record video quality overall down, sometime
appears to mosaic;
②The record video file locates where there is a bad sector in a hard disk drive, it will cause the mosaic
raising;
Page 36
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
71
Postscript
Product parameter Table
4CH
8CH
16CH
Compress
standard
H.264 baseline profile@L3.1 H.264 baseline profile@L3.1 H.264 baseline profile@L3.1
Video in BNC（1.0Vp-p/75Ω） BNC（1.0Vp-p/75Ω） BNC（1.0Vp-p/75Ω）
Video out
1TV BNC（1.0Vp-p/75Ω）/
1VGA
1TV BNC（1.0Vp-p/75Ω）/
1VGA
1TV BNC（1.0Vp-p/75Ω）/ 1VGA
Picture standard
PAL(704×576)，
NTSC(720×480)
PAL(704×576)，
NTSC(720×480)
PAL(704×576)，
NTSC(720×480)
resolution ratio
1024x768/800x
600/1280x1024
1024x768/800x
600/1280x1024
1024x768/800x
600/1280x1024
Record encoded
D1/HD1/CIF D1/HD1/CIF D1/HD1/CIF
Record play 4ch 8ch 16ch
Roll rate
PAL:1~25P/S；NTSC:1~30P/S PAL:1~25P/S；NTSC:1~30P/S PAL:1~25P/S；NTSC:1~30P/S
Audio in
RCA×4 RCA×8 RCA×4
Audio out BNC×1 BNC×1 RCA×1
Audio encoded
ADPCM ADPCM ADPCM
Audio encoded
rate
32Kbps 32Kbps 32Kbps
Alarm In
4E 4E 4E
Alarm Out
1ch 1ch 1ch
Record mode
Manual record，motion record
and extern alarm record
Manual record，motion record
and extern alarm record
Manual record，motion record
and extern alarm record
Multi mode
Record，Play，Internet Record，Play，Internet Record，Play，Internet
Network
interface
RJ45(10M/100M) RJ45(10M/100M) RJ45(10M/100M/1000M)
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
72
Mobil platform
Naway.CAB；symbian v3
；
symbian v5；Naway-Android
；
iphone，Blackberry
Naway.CAB；symbian v3
；
symbian v5；Naway-Android
；
iphone，Blackberry
Naway.CAB；symbian v3
；
symbian v5；Naway-Android
；
iphone，Blackberry
RS485
PTZ control PTZ co ntrol PTZ control
Communication
port
RS485×1，USB2.0×2 RS485×1，USB2.0×2 RS485×1/2，USB2.0×2
Hard Disc SATA×1/2（maximum 2T） SATA×1\2（maximum 2T） 2/4/8SATA（maximum 2T）
USB interface
Usb mouse，Usb disc backup
、
usb mobile hard disk
Usb mouse，Usb disc backup
、
usb mobile hard disk
Usb mouse，Usb disc backup
、
usb mobile hard disk
Remote control Yes Yes Yes
Power adapter
12V/3A DC
（
acc ordi ng t o the sum of
DIS K）
12V/3A DC
（
acc ordi ng t o the sum of
DIS K）
12V/5A /6ADC
（
acc ordi ng t o the sum of
DIS K）
Working
temperature
0℃～+60℃ 0℃～+60℃ 0℃～+60℃
Working
humidity
10%～90% 10%～90% 10%～90%
Product size
（（（（mm））））
330x250x50mm
（
acc ordi ng t o the sum of
DIS K）
330x250x50mm
（
acc ordi ng t o the sum of
DIS K）
380x300x55mm
（
acc ordi ng t o the sum of
DIS K）
Product weight
（（（（Kg））））
2.6（without disc） 2.6（without disc） 3.0（without disc）
AAAAttention
ttentionttention
ttention：：：：Parameters vary depe
Parameters vary depeParameters vary depe
Parameters vary depending on the model
nding on the modelnding on the model
nding on the model
Page 37
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
73
PRODUCT WARRANTY CARD
All the products sold are covered by 12months warranty from the date of
invoice.
Warranty instructions：
1. Please contact us when the product is caused by its own fault within 1year
warranty.
2. Please mail us your written warranty card as soon as possible after purchasing
our products so that we can repair or replace this product to its original operation
condition. Or the company will not deal with it.
3. Please write the truth on the warranty card.
4. Paid for repairing as follows:
A: Equipment failure caused by human operation
B: Equipment failure caused by not conforming to the using environment
C: No warranty card
D: Warranty expired
Product model Product serial number
Purchasing time User name Contact person
Telephone
Note
：：：：
Please keep the warranty card for the better service.
Loading...