Page 1
Von Schweikert Audio
R EFERENCE GRADE SPEAKER SYSTEMS FOR MUSIC & FILM
VSX
ON-WALL SPEAKER SYSTEMS
Since 1957, Von Schweikert Audio's research goal was to develop new
speaker technology that will enable a listener to believe he or she is
listening to live music. Each model is uniquely endowed with engineering
breakthroughs combined with the latest technology in driver design,
innovative crossover engineering, and the psychoacoustics of the
listening experience.
Page 2
The VSX-M is a lifestyle on-wall home theater speaker
designed to blend with flat panel displays.
As a full-range speaker for music, VSA engineered
powerful bass response, combined with spectacular stereo
imaging, into a small attractive aluminum extruded cabinet.
Superb vocal intelligibility by use of two small bass/
midrange drivers, as opposed to a larger singular unit,
enabling a quasi three-way design—Perfect for a center
channel!
Secure
Designed for structural and sonic stability, eight high
strength screws and drywall anchors are used to attach each
VSX providing a rock solid platform that doesn’t require a stud to be secure.
Flexible
Designed to fit any lifestyle, the VSX provides many unique
mounting options.
When hung vertical or horizontal the VSX can be pivoted on
a 180 degree axis to allow for toe-in. This enables you to
angle the VSX up or down and left or right depending on
where you’re installing them in your home theater. For
example when placed in the center channel position, the
VSX can be mounted above or bellow the screen and angled
to direct sound at the audience.
The same is true when placing the VSX in extreme positions
to the left or right of the audience. When used for rear
channels, the VSX can be installed horizontally on the wall
just below the ceiling and angled down allowing for full range,
cohesive sound from ever channel in the system.
Made of the thickest extruded aluminum possible along with
an aluminum perforated grill, the VSX can be painted to
match any interior for anyone looking for uncompromised
sound that doesn’t cramp your lifestyle.
Page 3
Specifications
Bass Driver 2-5.5” heavy-duty bass/midranges with cast frame, cellulose acetate
Tweeter 1” composite silk/polymer resin dome with Ferrofluid cooling, high tem-
Crossover Global Axis Integration Network (synthesized steep filters with phase-
Frequency Response 40Hz to 25 kHz (-3dB points, in-room). Anechoic Graphs included. An-
Impedance 14 ohms (7 ohms minimum)
Sensitivity 87.5 dB @2.8V-1m
pulp cones impregnated with mica substrate and damped with a carbon
fiber/resin polymer, Low Distortion Motor system, butyl rubber surrounds, long throw spider, and high temperature voice coil. This new
driver design has very natural sound quality with inaudible coloration or
distortion.
perature voice coil, and Low Distortion Motor design. This tweeter is very
musical, without harshness, even at high volume levels that would cause
“standard” tweeters to distort.
consistent behavior) with 220Hz and 2.2kHz crossover points. This
crossover design has been engineered to radiate sound in a wide
“bubble” instead of a “beam”, so that phase and frequency response do
not radically change off-axis. The audiophile-quality parts have been
hand selected, including polypropylene capacitors and premium air core
inductors.
echoic, or *free space* graph measurements, do not represent the 6db
bass boost enabled by room boundaries.
Power Handling 8 – 200 watts
Minimum Power 8 watts per channel. Single Ended Triode Amps welcome!
Dimensions M25 7”w x 4.75”d x 25”h
M30 7”w x 4.75”d x 30”h
M35 7”w x 4.75”d x 35”h
Weight M25 26lbs (33lbs packed)
M30 30lbs (37lbs packed)
M35 34lbs (41lbs packed)
Inputs High quality low profile binding posts with rhodium plating.
Warranty Ten years parts and labor, excluding abuse such as burnt voice coils.
Finishes Silver with black end caps and black accents. Comes with both silver and
black removable grills.
Page 4
Von Schweikert Audio
930 Armorlite Dr
San Marcos CA 92069
USA
Phone: 760-410-1650
www.vonschweikert.com
Loading...