Vonets VRP150 Quick Setting Manual

VONETS——VRP150 150M Mini WiFi Repeater

1

150M Mini WiFi Repeater

VRP150

Quick Setting Guide

VONETS——VRP150 150M Mini WiFi Repeater

2

Declaration

Copyright © 2013 Shenzhen HouTian Network Communication Technology
Co.Ltd

All rights reserved, with retained ownership
Without Shenzhen HouTian Network Communication Technology Co.Ltd written
authorization, any company or personal can’t copy, writer or translation part or all
contents. Can’t do commodity distribution for any commercial or profitable purposes
by any ways(electricity, mechanical, photoprint, record or other methods).
VONETS is the registered trademark of Shenzhen HouTian Network Communication
Technology Co.Ltd. The other all trademarks or registered tradem arks mentioned in
this documents are belong to the individual owners. The product specifications and
information technology mentioned in this manual are just for reference, if any updates,
without other notice. Except for special agreements, this manual is just for user
guidance, any statements, information and so on in this manual can’t constitute the
warranty of any forms.

VONETS——VRP150 150M Mini WiFi Repeater

3

Product Introduction:

VRP150 support 3 functions

WiFi Repeater (VRP150): is a functional device that assists the Internet
communication gateway to expand wireless coverage area. It is mainly used for
expansion of wireless network signal and area coverage to make sure the smooth
running of home wireless network.

Remark:

1.When you want to restore the factory default setting, please press RESET button on
the product for 5 seconds, after green light blink a few , it will reset automatically (it will
take about 30 seconds)

2. Humanized design,When you do not need to connect Wifi while sleeping at night, you
can press the switch on the housing, turned off the wifi to reduce unnecessary
radiation, beneficial to health.

3. VRP150 can be supplied power via USB charger, mobile power and computer USB
port

VONETS——VRP150 150M Mini WiFi Repeater

4

Chapter 1 Quick Setting Guide of WiFi

Repeater mode

1. Configure VRP150
 Wireless connect VRP150 by laptops, smart mobiles, IPAD and other wireless

devices.

 The default WiFi SSID (WiFi name) is: VONETS_the last six characters of product

MAC address.
 The default WiFi password is 12345678
See the following picture：

VONETS——VRP150 150M Mini WiFi Repeater

5

Set computer IP address to automatically, please see the words in the red circle of the
following picture:

2. Open the IE browser, enter http://vonets.cfg virtual domain name setting(VDNS).

Remark:
Enter domain name, then Enter, the login page will appear, the default admin and
password is admin.

3. Scan Hotspots

After entering the IE browser, the WiFi hotspots window will appear, can search the
WIFI hotspots signal that opened SSID broadcast around, please see the following:

VONETS——VRP150 150M Mini WiFi Repeater

6

 Choose a correct WiFi signal, then click Next, the following interface will appear:

 Enter the correct password, confirm it is correct one, then click Apply button.

VONETS——VRP150 150M Mini WiFi Repeater

7

 Click Apply button, the above interface will appear, the configured parameters h

ave been saved successfully, please make sure the password input is correct, tu

rn off and reboot the device.

Remark: After configured successfully, the WiFi name and password of the device are the
same as the source hotspot’s parameters, users can go to WiFi Repeater menu to change
SSID and password.

FCC STATEMENT

1. This device complies with Part 15 or the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that

may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement:

The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without RF striction.

NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 or the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications, However, there is no guarantee that interference will not
occur in a particular installation. If the equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

--- Reorient or relocate the receiving antenna.

--- Increase the separation between the equipment and receiver.

--- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

--- Consult the dealer or an experienced radio/ TV technician for help.