7741591 - Downloaded from www.volvopenta.com 12/03/2014 09:32:39
2
7741591 / 2003-12
Safety
This owner’s manual contains information you need to operate
your boat engine and drive safely. Check that you have the correct manual for your engine and drive.
This manual also contains a considerable amount of information concerning the engine and drive: model identification, preventive maintenance recommendations, fuel and oil recommendations, and other important points. Please keep this book
with your boat at all times.
NOTE! It is important that this manual stays with the
boat when it is sold. Important safety information must be passed to the new owner. The
service information provided in the manual
gives the owner important information about
maintaining the engine and drive.
If you do not understand or are uncertain about any operation
or information in this owner’s manual, please contact your Volvo Penta dealer. He will be able to help you with an explanation
or will demonstrate the operation.
NOTE! Federal law requires manufacturers to notify
owners in the event that a safety related defect is discovered on any of their products. If
you are not the original owner of this engine
and drive, please notify us at our address
listed in this manual, or through an authorized
Volvo Penta dealer about the change in ownership. This is the only way we will be able to
contact you if necessary.
This manual will alert you to certain things you should do very
carefully. If you don’t, you could
— hurt yourself or bystanders
— hurt the boat operator or bystanders
— damage the machinery.
Carefully observe the safety alert symbols shown for dangers,
warnings, and cautions. They warn you of possible dangers or
important information contained in this manual.
7741591 - Downloaded from www.volvopenta.com 12/03/2014 09:32:39
HOWEVER: WARNINGS ALONE DO NOT ELIMINATE
HAZARDS, NOR ARE THEY A SUBSTITUTE FOR SAFE
BOAT HANDLING AND PROPER ACCIDENT PREVENTION MEASURES!
DANGER!
FAILURE TO COMPLY WITH A DANGER SYMBOL
WILL RESULT IN SERIOUS INJURY OR DEATH TO
BOAT OPERATOR, BOAT OCCUPANTS, AND/OR
OTHERS.
WARNING!
FAILURE TO COMPLY WITH A WARNING MAY RESULT IN INJURY OR DEATH TO BOAT OPERATOR,
BOAT OCCUPANTS AND/OR OTHERS.
CAUTION!
FAILURE TO COMPLY WITH A CAUTION MAY RESULT IN FAILURE OR DAMAGE TO THE EQUIPMENT.
Below is a summary of the risks and safety precautions you
should always observe or carry out when operating or servicing the engine:
1. Check that the warning or information decals on the engine are always clearly visible. Replace decals that have
been damaged or painted over.
2. Always turn the engine off before starting service procedures. Avoid hot surfaces and liquids in supply lines and
hoses when the engine has just been turned off and is still
hot.
3. To prevent a possible explosion, operate the blower as recommended by the boat manufacturer before starting the
engine. If the engine compartment is not equipped with a
blower, open the engine cover or hatch before starting to
disperse any gasoline fumes that may be present. Leave
the hatch open until after the engine is running.
4. Reinstall all protective parts removed during service operations before starting the engine. Make a point of familiarizing yourself with other risk factors, such as rotating
parts and hot surfaces (exhaust manifold, starter, etc.).
5. Approaching a running engine is dangerous. Loose clothing or long hair can get caught in rotating parts and cause
7741591 / 2003-12
3
Safety
serious personal injury.
6. If so equipped, turn off the power supply to the engine at
the main switch and lock it in the
ing work.
7. Avoid opening the filler cap for engine coolant system (freshwater cooled engines) when the engine is still hot. Steam
or hot coolant can spray out as system pressure is lost.
8. If opening the filler cap or drain cock/venting cock, or removing a plug or engine coolant line from a hot engine,
open the filler cap slowly and release coolant system pressure gradually; otherwise, steam or hot coolant can spray
out.
9. Stop the engine and close or block the sea water intake
before carrying out operations on the engine cooling system.
10. Only start the engine in a well-ventilated area. If operating
the engine in an enclosed space, make sure your work area
is well ventilated.
11. Anticorrosion and antifreeze agents can be hazardous to
health and to the environment. Whenever you use these
agents, follow the manufacturer’s instructions on the product packaging.
12. Certain engine oils are flammable. Some of them are also
dangerous if inhaled. Whenever you use these agents, follow the manufacturer’s instructions on the product packaging. Ensure that ventilation in the work place is good. Use a
protective mask when spraying.
13. Hot oil can cause burns. Avoid skin contact with hot oil. Ensure that the lubrication system is not under pressure before beginning to work on it. Never start or operate the engine with the oil filler cap removed; otherwise, hot oil could
spew out.
14. Never allow an open flame or electric sparks near the battery or batteries. Never smoke in proximity to the batteries.
The batteries give off hydrogen gas during charging which
7741591 - Downloaded from www.volvopenta.com 12/03/2014 09:32:39
when mixed with air can form an explosive gas. This gas is
easily ignited and highly volatile. Incorrect connection of
the battery can cause a spark, which would be sufficient to
cause an explosion. Do not disturb battery connections
when starting the engine (spark risk) and do not lean over
batteries.
15. Always ensure that the positive and negative battery leads
are correctly installed on the corresponding terminal posts.
Incorrect installation can result in serious damage to electrical equipment.
16. Always use protective goggles when charging and handling
batteries. Battery electrolyte contains sulfuric acid, which is
highly corrosive. If battery electrolyte comes into contact
with unprotected skin, wash it off immediately using plenty
of water and soap. If battery acid comes in contact with the
eyes, immediately flush with copious amounts of water and
OFF
position before start-
obtain medical assistance.
17. To ensure safe handling and to avoid damaging engine
components on top of the engine, use a lifting beam to
raise the engine. All chains and cables should run parallel
to each other and as perpendicular as possible in relation
to the top of the engine. Always check that lifting equipment is in good condition and has sufficient load capacity
to lift the engine and any extra equipment installed.
18. If extra equipment is installed on the engine, which alters
its center of gravity, a special lifting device is required to
achieve the correct balance for safe handling.
19. Never work on an engine that is suspended on a hoist.
20. Components in the electrical, ignition, and fuel systems on
Volvo Penta products are designed and constructed to minimize the risk of fire and explosion. Using non-original
Volvo Penta parts that do not meet the above standards can result in fire or explosion on board. Damage
caused by using non-original Volvo Penta replacement
parts will not be covered under any warranty provided by
Volvo Penta.
21. Fuel filter replacement should be carried out on a cold engine to avoid the risk of fire caused by fuel spilling onto the
exhaust manifold. Always cover the generator if it is located under the fuel filter. The generator can be damaged
by spilled fuel.
22. Always use protective gloves when tracing leaks. Liquids
ejected under pressure can penetrate body tissue and
cause serious injury.
23. Always use fuel recommended by Volvo Penta. The use of
lower quality fuels can damage the engine. Poor fuel quality can also lead to higher maintenance costs.
24. Never use a high-pressure washer when washing the engine.
4
7741591 / 2003-12
Introduction
Congratulations on choosing a new boat equipped with a Volvo Penta marine engine. Volvo Penta has been building marine engines since 1907. Quality, operating reliability, and innovation have made Volvo Penta a world leader in the marine
engine industry. From engineering design and manufacturing
to support activities in Parts, Service, and Sales, high standards have been set to ensure your pride and satisfaction as
the owner of a Volvo Penta product.
As owner of a Volvo Penta marine engine, we would also like to
welcome you to a worldwide network of dealers and service
workshops to assist you with technical advice, service requirements and replacement parts. Please contact your nearest authorized Volvo Penta dealer for assistance.
We wish you many pleasant voyages.
Our core values: Quality, Safety, Environmental
Care
The values and qualities that Volvo Penta expresses are what
make the company unique. From the very beginning, safety
and quality have stood at the heart of the development of all of
our products, processes, and services. It is on these values
and qualities that the Volvo Penta corporate identity, brand position and legal status have been founded. Today’s core values
of quality, safety, and care for the environment remain central
to Volvo Penta. They express what we believe in as a company
and will ultimately help us to survive.
Quality
but now encompasses all aspects of our products and services. In today’s competitive environment, Volvo Penta’s quality
commitment extends beyond industrial craftsmanship and engineering ingenuity to embrace care for the customer throughout the life of the product.
Safety
torically embedded in the quality of all Volvo products, it also
encompasses personal, family, business, and environmental
values.
Environmental care
tion, distribution, service, and recycling, is an integral part of
7741591 - Downloaded from www.volvopenta.com 12/03/2014 09:32:39
the Volvo quality commitment towards customers, employees,
and the community. By embracing the environment as a core
value, Volvo demonstrates its understanding of the environmental impact its products have upon nature and the shared
urban and rural surroundings.
Volvo Penta continually commits a considerable part of its development resources toward minimizing the environmental im-
is a value that traditionally referred to product quality
will always be our most distinguishing core value. His-
in all operations, from design to produc-
pact of its products. Examples of areas where we are always
looking for improvements are exhaust emissions, noise levels,
and fuel consumption.
Regardless of whether your Volvo Penta engine is installed in
a boat used for pleasure or commercial operation, incorrect operation or improper maintenance of the engine will result in disturbance or damage to the environment.
In this owner’s manual there are a number of service procedures, which, if not followed, will lead to an increase in the engine’s impact on the environment, and on running costs and a
reduction in service life. Always observe recommended service intervals and make a habit of checking that the engine is
operating normally every time you use it. Contact an authorized Volvo Penta dealer if you cannot correct the fault yourself.
Remember that most chemicals used on boats are harmful to
the environment if used incorrectly. Volvo Penta recommends
the use of biodegradable degreasing agents for all cleaning.
Always dispose of engine and transmission oil waste, old paint,
degreasing agents and cleaning residue etc. at proper disposal areas so that they do not harm the environment.
Adapt speed and distance during your boat trips so that swell
and noise generated by the boat do not disturb or harm wildlife,
moored boats, docks, etc. Wherever you land or cruise, please
show consideration and always leave the areas you visit as
you would like to find them yourself.
7741591 / 2003-12
5
Introduction
Factors that affect engine performance
Power ratings
A great number of environmental factors, such as barometric
pressure, ambient temperature, humidity, the quality of fuel,
and exhaust back pressure can affect engine performance.
When it comes to quoting and comparing ratings, it is important
that there is a unified set of standards for measurement.
In September 1989, all major marine engine manufacturers
agreed to quote engine power output according to a common
set of conditions. These conditions are referred to as
All Volvo Penta engines meet the ISO 8665 standard.
8665.
This ISO standard outlines the following fixed values or common conditions for determining the rating of the engine.
ConditionValue
Sea water temperature77° F (25° C)
Fuel temperature104° (40° C)
Air temperature77° F (25° C)
A gasoline engine operates with very little surplus air. When
conditions deviate from the standard values, the result can be
a loss of power at full load. It can also cause a rise in exhaust
emissions due to incomplete fuel combustion.
Marine engines can be rated according to one of several power
standards, but power output itself is quoted in kilowatts (KW) or
horsepower (HP), for a given engine speed, usually at maximum revolutions per minute (RPM).
Value
How load conditions affect the speed of a
planing hull
The overall weight of the boat is another important factor in
7741591 - Downloaded from www.volvopenta.com 12/03/2014 09:32:39
performance. Any increase in boat weight will slow down the
boat speed, particularly on boats with planing and semiplaning
hulls.
For example, a new boat tested with fuel and water tanks only
half filled, and without any load, can easily drop 2 to 3 knots in
speed when tested fully fuelled and loaded with all normal
equipment and supplies for safe and comfortable cruising. This
is because the propeller installed originally is frequently one
that is designed to give maximum speed when the boat is new.
For this reason it is often advisable to reduce the propeller
pitch by as much as an inch or more in order to counter the effects of the increase in overall weight encountered in normal
cruising, particularly in hotter climates. Although this will reduce top speed somewhat, overall ride conditions will improve
and you should achieve greatly enhanced acceleration.
In considering the influence of weight, it is worth remembering
that fiberglass boats absorb a significant amount of water into
their hulls while left afloat for any length of time and so become
progressively heavier. Another negative influence on boat performance is marine growth beneath the waterline - a problem
that is often overlooked.
“Wagon-back” effect
As long as we continue to use combustion technology for engines, there will be exhaust emissions. Despite the substantial
reductions achieved in modern engines, as fuel burns exhaust
emissions and fumes will always be given off.
ISO
But there is also another effect. Any shear-bodied object moving forward will create a phenomenon we call “wagon-back effect.” Due to a difference in air pressure, the airflow behind
such an object will have a tendency to draw dirt and exhaust
emissions back into the object. (You’ll frequently see evidence
of this in the excess of road grime that is drawn back onto the
rear windows of cars.) A boat with a sheer, broad transom and
high superstructure creates its own wagon-back effect. This
recirculating air has a tendency to draw exhaust fumes and
water spray up toward the afterdeck. Often people will make
the mistake of opening a ventilator or port hole in order to remove the fumes, but it has the opposite effect — more fumes
are drawn in, and conditions merely become worse. In high
concentrations these fumes may be hazardous. If you suspect
that your boat exhibits this “wagon-back” effect. Please contact
your Volvo Penta dealer.
Your new boat
Every new boat has it’s own special characteristics. Even experienced boat owners should note carefully how a boat behaves at different speeds, weather conditions, and loads. Your
boat owner’s manual contains information to help you operate
it with safety and pleasure. It contains details of the boat,
equipment supplied or fitted, systems, and information on operation and maintenance. Please read it carefully, and familiarize yourself with your boat before using it for the first time.
We strongly recommend that you install an emergency stop
switch, regardless of the type of boat. If your boat does not
6
7741591 / 2003-12
Introduction
Boater’s responsibilities
The operation, maintenance, and care of the Volvo Penta engine and power package as outlined in the owner’s manual are
the owner’s responsibility. (See the
The owner must keep records of all maintenance services performed. This record of proper maintenance may be required to
determine warranty coverage on certain repairs and should be
transferred to each subsequent owner. If you are not sure of
the proper maintenance procedures, contact the Volvo Penta
Consumer Affairs Department at the address found elsewhere
in this document.
The operator is responsible for the correct operation of the
boat and for the safety of all passengers. Make sure that all operators read this manual before operating the boat. Show your
passengers the location of emergency equipment and explain
how to use it. Be sure one of your passengers knows how to
handle your boat in case of emergency.
Requirements for personal flotation devices (life vests, life preservers) and other safety equipment vary, depending on the
type of boat and local regulations. Always comply with the regulations that apply to your boat.
Maintenance Schedule.
Planning your trip
Everyone wants to have a problem-free and pleasant time
when they take their boat out. To help you do this we have provided a pre-journey checklist below. Take extra time to check
the engine and its equipment and the general maintenance of
the boat.
•Get up to date charts for the planned route
•Calculate distance and fuel consumption
•Note places where you can refuel on your planned course
•Tell friends or relatives about your route (that is, file a “float
plan”).
Safety equipment
Basic safety rules of boating
•Shut off the engine when people who are in the water come
near the boat.
)
•Propellers are inherently dangerous, and as such are potential safety hazards. Make sure that the propeller is not
operating when people who are in the water come near
the boat.
•Avoid standing up or shifting weight suddenly in small, lightweight boats.
•Keep your passengers seated in seats. The boat’s bow,
gunwale, transom, and seat backs are not intended for use
as seats.
•Insist on the use of personal flotation devices by all passengers at all times.
•Know the “rules of the road” and obey them. If you are not
familiar with the “rules of the road,” take the U.S. Coast
Guard’s boater safety course. You may find information
about boating safety at WWW.USCGBOATING.ORG and
WWW.CGAUX.ORG/CGAUXWEB/PUBLIC/
PUBFRAME.HTM.
•Prevent explosion and fire by maintaining your fuel delivery system in top condition. Fuel vapor is volatile; handle
fuel with care.
•Keep your boat and equipment neat and in top operating
condition. Carry a selection of spare parts for the engine.
(Volvo Penta’s on-board kit contains a selection of essential items that a boat owner should carry at all times. See
your Volvo Penta dealer.)
•NEVER OPERATE THE BOAT IF YOU ARE UNDER THE
INFLUENCE OF DRUGS OR ALCOHOL.
•If boating waters are unfamiliar, obtain appropriate charts
•Rescue and emergency items such personal flotation de-
7741591 - Downloaded from www.volvopenta.com 12/03/2014 09:32:39
vices and signal rockets. Make sure all passengers know
where these items are.
•Replacement parts
•Proper tools
7741591 / 2003-12
7
Introduction
High performance boat operation
High performance is not only defined by engine size, but by a
combination of engine power (horsepower), hull design, and
the size of the boat. Your new engine(s) produce a high power
output. Depending on the boat type, the top speed may be
much higher than what you are accustomed to.
High speed operation requires an experienced operator who
has mastered handling of high performance boats. It is advisable that you learn the boat’s behavior before you take passengers on board. Inform your passengers about your boat’s characteristics and the maneuvers you intend to do. Use the boat’s
performance with due consideration and care!
When operating at high speeds, remember that other boaters
may not realize the speed at which you are traveling, especially when you close in on another boat from astern or from
ahead. Always keep a good distance to allow for the unexpected! Always be prepared for what other boaters may do unexpectedly. High speed driving requires the driver to give a high
degree of attention to boat operation and surrounding conditions.
A boat traveling at a speed of approximately 70 M.P.H. (60
knots) covers about 101 feet (30 meters) in 1 second. The faster you go the quicker things will happen. High speed driving
requires a lot of water and a good distance from possible hazards! Always allow for adequate reaction time. Always reduce
speed when visibility is reduced for whatever reason.
When driving, make sure that all passengers are safely seated.
Emphasize this especially if you have a larger, high performance cabin cruiser where one normally moves about during
operation. Reduce speed considerably, or stop completely if
someone needs to move about the boat.
The driver should always use the safety kill switch! The kill
switch lanyard which is securely connected to the driver, immediately shuts off the engine(s) should the driver be thrown from
the driving position. Even if the risk of being thrown overboard
is practically nonexistent in your type of boat, the risk of the
driver falling and being dazed in rough seas can be even greater.
7741591 - Downloaded from www.volvopenta.com 12/03/2014 09:32:39
Remember, even when the engine(s) is stopped in a high performance boat that is planing, it will travel approximately 325
8
7741591 / 2003-12
Product and Application Information
Please complete this section for future reference.
Delivery date ____________________________________________________________________________
Engine model number _____________________________________________________________________
Engine serial number _____________________________________________________________________
Drive/Transmission model __________________________________________________________________
Drive/Transmission serial number ____________________________________________________________
Transom shield assembly serial number _______________________________________________________
Boat manufacturer _______________________ Boat year ________________________________________
Boat model ____________________________ Boat length ______________________________________
Hull ID number (HIN) ______________________________________________________________________
State/Province registration number ___________________________________________________________
It is very important that you obtain all serial numbers directly from serial number plates attached to product
assemblies. Check features page for the location of product serial number plates.
Volvo Penta reserves the right, without prior notice, to revise materials, standard equipment, specifications, models and to discontinue
models. Not all models, equipment and accessories are available in all markets or countries. Certain models and/or configurations may
not be available at the time of publication. Representations made regarding these products are subject to actual use, application,
and/or operating conditions, as well as proper maintenance. The power rating data contained herein is for engines and conditions as
tested and may vary within manufacturing tolerances. Engines pictured in this brochure may feature custom accessories that are not
necessarily standard on production models. Horsepower ratings are in accordance with NMMA procedure.
7741591 / 2003-12
9
General Information
Engine model number
Transom shield model number
Identification numbers
Immediately upon taking delivery of your new boat, have the
dealer record the model and serial numbers of the engine and
drive in the
ed. (These numbers are required for warranty registration,
warranty service, and ordering parts.) Include the model and
serial number of your boat and any auxiliary equipment. Also,
make a copy and keep the copy in a safe place in the event
your boat is stolen.
Product and Application Information
space provid-
Owner’s identification card
When you purchased your boat, the dealer was required to
complete a warranty and registration form for your Volvo Penta
product. The owner’s portion of this form is your Owner’s Identification Card. This card provides proof of ownership and is required to validate warranty, should warranty service be necessary. Warranty coverage may be delayed until the warranty
and registration form is on file at Volvo Penta.
Product references, illustrations, and specifications
All information, illustrations and specifications contained in this
manual are based on the latest product information available
at the time of printing. Volvo Penta of the Americas, Inc. reserves the right to make changes at any time, without notice, in
specifications and models; to discontinue models; to change
any specifications or parts at any time without incurring any obligation to equip same on models manufactured prior to date of
such change.
When reference is made in this manual to a brand name, number, product or specific tool, an equivalent product may be
used in place of the product referred to unless specifically stated otherwise. To avoid hazards, equivalent products used
must meet all current U.S. Coast Guard Safety Regulations
and American Boat and Yacht Council (ABYC) standards.
All illustrations used in this manual may not depict actual models or equipment and are intended as representative views for
reference only.
7741591 - Downloaded from www.volvopenta.com 12/03/2014 09:32:39
Drive unit model number
10
7741591 / 2003-12
Toll-free Dealer Locator Service
General Information
Volvo Action Service (VAS)
Volvo Action Service (VAS) is a consumer breakdown service
available 24 hours each day, 365 days per year. If your engine
breaks down, the VAS coordinator will quickly locate your
nearest dealer. If you need a tow, parts, or mechanic, the VAS
coordinator will make all arrangements necessary to get you
back underway as soon as possible. Membership to Volvo Action Service is provided automatically to all Volvo Penta engine
owners. As long as your Volvo Penta engine is under factory
warranty, this service is absolutely free for Volvo Penta-related
repairs. Towing is not covered by the Volvo Penta warranty.
Once your warranty period has expired, there is a charge per
managed breakdown, plus any additional costs incurred for
towing, parts, or repairs.
If you have a question about Volvo Action Service, or need
If you are away from your home waters,
take your Volvo Penta product to the
nearest Volvo Penta servicing dealer. To
locate a Volvo Penta servicing dealer,
check the Yellow Pages under Boat
Dealers, or call 1-800-522-1959.
7741591 - Downloaded from www.volvopenta.com 12/03/2014 09:32:39
If you plan to do your own maintenance and repairs on your
Volvo Penta products, you should purchase a set of service
manuals that pertain to your particular engine and drive. Keep
in mind, however, that there are certain tasks that should only
be performed by your Volvo Penta dealer. He has the tools,
expertise, and most current information needed to properly
perform these tasks.
“Dealer-only” maintenance items are listed in the
nance Schedule
.
Mainte-
Parts and accessories
Genuine Volvo Penta parts are the result of many hours of
strenuous testing, and fulfill Volvo Penta’s strict quality and
safety requirements. Your authorized dealer has a complete
line of (or may order) genuine Volvo Penta parts, accessories,
coolants, and lubricants. When replacements are required,
use only Volvo Penta genuine parts.
Purchase all Volvo Penta replacement parts, accessories,
coolants, and lubricants from an authorized Volvo Penta dealer. He has needed parts in stock for routine maintenance, as
well as the information needed to order special parts and accessories for you.
Only authorized Volvo Penta dealers may purchase genuine
parts and accessories directly from the factory. Volvo Penta
7741591 / 2003-12
11
General Information
Volvo Penta dealer network
Volvo Penta has a comprehensive dealer network that offers
both service and spare parts for Volvo Penta engines. These
dealers have been carefully selected and trained to provide
professional assistance for service and repairs. They also
have the special tools and testing equipment required for maintaining a high standard of service. Volvo Penta dealers and
vendors must maintain a stock of original spare parts and accessories to cover most requirements of Volvo Penta owners.
When ordering a service or spare parts always quote the engine and drive/reverse gear complete type designation and
serial number. You will find this information on the engine
product plate and on a decal on the valve cover.
Always take your Volvo Penta product to an authorized Volvo
Penta servicing dealer for repair. Our dealers have the knowledge, factory-trained technicians, and special tools to take
care of any necessary repairs. Ideally, take your product back
to your selling dealer — he also knows you and your equipment.
For the name and location of your nearest Volvo Penta dealer,
consult the Yellow Pages under
1-800-522-1959.
Boat Dealers,
or call
Volvo Penta on the Internet
The URL address for Volvo Penta of the Americas is http://
www.volvo.com. When you reach the Volvo home page,
choose the
bar and then
7741591 - Downloaded from www.volvopenta.com 12/03/2014 09:32:39
Marine and Industrial Power Systems
Marine Leisure
from the drop down menu.
on the menu
12
7741591 / 2003-12
Warranty information
Volvo Penta’s warranty package can be found in the accompanying warranty booklet. Along with the warranty information
you will find other checklists and reports for Volvo Penta products.
Some areas may have other warranty conditions, depending
on national legislation and regulations. Information about
these conditions can be obtained from Volvo Penta importers
and dealers in those areas. Contact your local Volvo Penta
representative for a copy.
Warranty Registration Form
The Warranty Registration Form should always be filled out
and sent in by the dealer. Make sure that this has been done,
since delay of warranty claims can occur if no proof of the delivery date can be provided.
2 PLUS 4™ Extended Protection
In addition to our factory warranty, owners may purchase Volvo
Penta’s exclusive 2 PLUS 4 Extended Protection plan, which
provides additional service benefits for a total of six years of
coverage. The 2 PLUS 4 program covers most repairs to Volvo
Penta engines, drives, and transmissions, and is fully transferable to second owners.
The extended protection plan provides mechanical coverage,
a towing allowance, and optional accessories and trailer coverage. It covers an extensive list of repairs with only a $25.00
deductible per repair visit. See Appendix B of this document for
more information about the 2 PLUS 4 Extended Protection
General Information
7741591 - Downloaded from www.volvopenta.com 12/03/2014 09:32:39
Your Volvo Penta product consists of two components: the engine and the drive. There are certain parts on each component that
you, the owner, must take care of to make sure that your Volvo Penta product stays in optimum running condition. The important
parts of each component are shown in the photographs on the following “
tems are described below; the maintenance procedures are found in the
Circuit breakers and fuses
Features”
Maintenance
pages. Explanations of these parts and sys-
section.
12
4
3
4.3GL-A, 5.0GL-A, 5.0GL-B, 5.7GL-A, 5.7GL-B
6
2
1
5
4
2
2
1
7741591 - Downloaded from www.volvopenta.com 12/03/2014 09:32:39