Introduction
8
Volvo Car Corporation and the environment
Efficient emission control
Your Volvo is manufactured following the
concept Clean inside and out – a concept
that encompasses a clean interior environment as well as highly efficient emission control. In many cases the exhaust emissions are
well below the applicable standards.
Clean air in the passenger
compartment
A passenger compartment filter prevents
dust and pollen from entering the passenger
compartment via the air intake.
A sophisticated air quality system, IAQS
1
(Interior Air Quality System) ensures that the
incoming air is cleaner than the air in the traffic outside.
The system consists of an electronic sensor
and a carbon filter. The incoming air is monitored continuously and if there is an increase
in the level of certain unhealthy gases such
as carbon monoxide then the air intake is
closed. Such a situation may arise in heavy
traffic, queues and tunnels for example.
The entry of nitrous oxides, ground-level
ozone and hydrocarbons is prevented by the
carbon filter.
Textile standard
The interior of a Volvo is designed to be
pleasant and comfortable, even for people
with contact allergies and for asthma sufferers. All of our upholstery and interior textiles
are tested with respect to certain unhealthy
substances and allergens as well as emissions. This means that all textiles fulfil the
requirements in the Öko-Tex 100 standard
2
,
a major advance towards a healthier passenger compartment environment.
Öko-Tex certification covers seatbelts, carpets and fabrics for example. The leather in
the upholstery undergoes chromium-free
tanning with natural plant substances and
fulfils the certification requirements.
Volvo workshops and the environment
Regular maintenance creates the conditions
for a long service life and low fuel consumption for your car, and in this way you contribute to a cleaner environment. When Volvo’s
workshops are entrusted with the service
and maintenance of your car it becomes part
of our system. We make clear demands
regarding the way in which our workshops
are designed in order to prevent spills and
discharges into the environment. Our workshop staff have the knowledge and the tools
required to guarantee good environmental
care.
Reducing environmental impact
You can easily help reduce environmental
impact, for example, by driving economically,
by purchasing eco-labelled car care products and by servicing and maintaining the car
in accordance with the instructions in the
owner’s manual.
The following hints will help you to do your bit
for the environment (for further advice on
how you can reduce environmental impact
and drive economically, see page 116).
• Decrease fuel consumption by choosing
ECO tyre pressure, see page 158.
• Remove unnecessary items from the car the greater the load the higher the fuel
consumption.
• Is your car equipped with an engine block
heater? If so, use it for a few hours before
starting from cold to reduce fuel consumption and exhaust emissions.
• Drive gently and avoid braking too hard.
• Drive in the highest gear
possible. Low engine
speeds result in lower fuel
consumption.
• Use engine braking to
slow down.
• Avoid idling. Take consideration of local
regulations. Switch off the engine in longer
stationary traffic.
1
Option
2
More information on www.oekotex.com