Voltex VBHE-2L, VBHE-4L Installation & User Manual

Installation
& User Guide

3 in 1 Bathroom Heater

VBHE-2L (2 x 275W)
VBHE-4L (4 x 275W)

230V~; 50Hz

II240817

IMPORTANT: PLEASE READ AND SAVE THESE INSTRUCTIONS

© Voltex Electrical 2015. All Rights Reserved.

®

IMPORTANT INSTALLATION, USE & WARRANTY INSTRUCTIONS

Thank you for your purchase of the Voltex 3 in 1 Bathroom Heater (appliance).
Please read these instructions carefully before installing and using the appliance.
Keep the instructions handy for future reference.

IMPORTANT: This appliance must be installed in accordance with national and
local council building regulations, and the Australian and New Zealand wiring
rules AS/NZS 3000 latest edition thereof.

ALL ELECTRICAL WORK MUST BE CARRIED OUT BY A LICENSED ELECTRICAL
CONTRACTOR OR ELECTRICIAN.

CAUTION: The appliance should not be installed directly above a bath, shower
or fixed water container. The appliance must not be installed in a position where
water may splash onto the appliance.

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE APPLIANCE

1.

Use this appliance only as described in this manual. Any other use not
recommended by Voltex Electrical may

cause fire, electric shock, or injury
to persons and void the warranty. If you have questions, please contact
Voltex Electrical at first.

2. Always operate the appliance from a power source of the same rated
voltage, frequency and power input as indicated on the appliance
identification plac

e.

3. This appliance is intended for household use and similar applications only.

4. This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.

5. Do not operate any appliance after the appliance malfunctions, or is
dropped or appears damaged in any way.

6.

There are no user-serviceable parts inside the appliance. Contact your
local electrician if servicing or maintenance is required.

GENERAL SAFETY WARNINGS

To reduce the risk of fire, electrical shock or injury to persons or property:

© Voltex Electrical 2015. All Rights Reserved.

®

1.

For the exhaust fan to work efficiently

, replacement air of a volume
equivalent to what is being extracted must be able to enter the room. In
general, this air would be drawn under the door, or through a slightly open
window. If the room is airtight, the fan will function poorly.

2.

This appliance is designed for installation in flat ceilings ONLY. Do not
mount it on a sloping ceiling or a vertical wall.

3. Before commencing any cutting, check that there are no obstructions
such as ceiling joists and that there is sufficient height clearance or the
housing and routing of the duct. Check that the electrical wiring can be
routed from the wall switches to the mounting location.

7. This appliance is designed for indoor use only.

8. Do not allow any foreign object to enter through the facia opening or outlet
as this may damage the appliance and/or the user.

9. The appliance shall, under no circumstances, be covered with insulating
material or similar material.

10. Do not locate the appliance immediately below a socket-outlet.

11. This appliance is designed to provide infra-red radiant heat to warm the
body while drying, when standing directly underneath. It is not designed
as a room heater.

12.

WARNING: This appliance is not equipped with a device to control the room
temperature. Do not use this heater in small rooms when they are
occupied by persons not capable of leaving the room on their own, unless
constant supervision is provided.

13.

WARNING: Curtains and other combustible material may ignite if in contact
with the appliance or if the appliance is installed to close.

14. Make sure that the power is OFF before installation.

15. When cutting into the mounting surface, do not damage electrical wiring
and other hidden utilities.

16. The appliance must be properly connected to the protective earthing
conductor in the fixed wiring of the installation.

17.

Precautions must be taken to avoid the back-flo

w of gases into the room

from the open flue of gas or other fuel-burning appliances

18. FOR SAFE USE OF THIS APPLIANCE, AFTER INSTALLATION, DISCONNECTION
OF THE APPLIANCE FROM THE SUPPLY SHALL BE POSSIBLE. MEANS FOR
ALL POLE DISCONNECTION MUST BE INCORPORATED IN THE FIXED WIRING
IN ACCORDANCE WITH THE WIRING RULES.

IMPORTANT CONSIDERATIONS BEFORE INSTALLING

A few minutes planning can make a big difference to the installation time and to
your satisfaction with the function of the appliance.