Voltex V-3-SW-R10, V-3-SW-SSR-3A User Manual
Smart Touch devices must be
installed by a qualified
electrical expert.
TOUCH
TOUCH
!
TRIPLE Switch
smart
control.
smart life.
2
Year
Warranty
1. This switch cover offers a clean and fresh
look. Backlit and touch-enabled, ideal for
your new smart home and suitable for
use in conjunction with a standard
wall box.
2. No need for any extra wiring or a neutral
wire and no need for changes to the
existing electrical infrastructure. By using
the mobile App each switch may be set
up as an On/Off switch, a dimmer switch,
a 2-Way switch, a timed switch option or
a favourite scenario switch.
3. The length of transmission of each
command is less than 2 milliseconds and
uses a very low power level. Transmissions
only occur when a command is initiated.
The amount of data consumed is also
very low for these transmissions and
commands.
4. The switch continues to work even if the
internet goes down or if the router or
Central Unit goes off.
5. Every time a paired light switch is
triggered, the most optimal timing
system, called Zero Cross Technology, is
implemented to complete the process.
This is to protect and extend the lifespan
of the electrical lamps and fittings that
are connected.
6. A sensor, fitted into the module, allows
the system to get an accurate reading
of the electrical current consumption
of each paired switch. The sensor also
functions as an overload protector and
shuts off the load in case of an overcurrent.
Versatility is the key to bringing your home to life. Instantly make your home a
smart home with our wirelessly brilliant technology! The Voltex Smart Touch
Triple Switch, enables scheduled switching, as well as the creation of unique
customised scenarios from the comfort of your home or directly from your
smart device when you are not homebound.
Using patent protected innovative technology, the system is installed quickly
and no rewiring or wall drilling is required.
Upgrade your living standards in a matter of hours!
Technical Specifications:
3A 10A
NAME V-3-SW-SSR-3A V-3-SW-R10
PRODUCT CODE A12744 A12745
POWER 100V-230V, 50-60 Hz 100V-230V, 50-60 Hz
MAX. CURRENT
3A, for all the buttons,
(3A Dimmer)
7A, for all the buttons,
(2A Dimmer)
LOAD RANGE 6VA-400VA 6VA-1600VA
TRANSMISSION
FREQUENCY
433 MHz 433 MHz
RANGE
Up to 100m Indoors,
500m Outdoor
Up to 100m Indoors,
500m Outdoor
DIMENSIONS FOR
MODULE
65 x 45 x 30mm 65 x 45 x 30mm
DIMENSIONS FOR
COVER PLATE
2 x 4 or 50 x 100mm 2 x 4 or 50 x 100mm
CONFIGURATIONS
On/Off, Dimmer, 2-Way,
Scenario, Timed
On/Off, Dimmer, 2-Way,
Scenario, Timed
What your Triple Switch includes:
1. Switch Cover Plate 2. Module 3. Yoke
Dimming – for light fixtures to be dimmable you need to ensure your light
fixture or bulbs/tubes are dimmable and that the voltage ranges from 220-230V.
If the voltage is lower than 220-230V, please contact us for an additional driver.
If the bulb or tube burns out, the module will go dark. It is not faulty, just replace
the lamp, and the switch backlight will light up again.
1. Download the App
Getting started:
1. Download the App
2. Install the Switch
3 Sync the Switch to your Central Unit and Mobile App
Scan the QR code
Search for the App in your Google Play Store or
Apple App Store
OR
For the initial installation, your smartphone must be connected to the same
Wi-Fi network as the Central Unit!
Loading...