Volta U6210, U6230 User Manual

English 2

Dansk 10

Svenska 12

Norsk 14

Suomi 16

U6200

U6205

U6210

U6215

U6220

U6230

English

Volta supply a range of cleaners with different accessories, all of which are covered

in this manual. Please refer to your specific model and its accessories.

Keep both cover flaps open and cross-reference the text with pictures where

necessary.

Modelys Accessories (all models)

s-bag

TM

Swivel hose and handle with manual suction control

Combination carpet/hard floor nozzle

Narrow crevice nozzle

Upholstery nozzle

Modelys Accessories (some models)

Extension tubes (x2)

Telescopic tube

Hard floor nozzle

Ensuring your safety

The cleaner is for domestic use only and has been designed to ensure maximum

safety and performance. Please follow these simple precautions:

The cleaner is double insulated so it must not be earthed

The cleaner is only to be used by adults

Do not pick up very fine dust (plaster, cement, cold cinders...)

Always store in a dry place

Do not use to pick up liquids

Avoid sharp objects

Do not pick up hot cinders or lighted cigarette ends

Do not use near flammable gases

Avoid tugging on the mains cable and check cable regularly for damage

Note: Do not use cleaner with a damaged cable.

If the cable is damaged, it should be replaced at a service centre

The plug must be removed from the socket outlet before cleaning or

maintaining the appliance

All service and repairs must be carried out by authorised service staff

Getting Started

1 Check that the s-bag

TM

is in place.

2 Insert the hose until the catches click to engage

(press catches inwards to release).

3 Attach extension tubes or telescopic tube (some models) to the hose

handle and floor nozzle and twisting them together (twist and pull

apart to dismantle).

4 Extend the cable and connect to mains, ensuring the cable is not

twisted before use (Press cable rewind button to rewind cable. Please

hold the plug to prevent it striking you).

5 Press the on/off button to start the cleaner.

6 To increase/decrease suction, adjust the rolling wheel control. Suction

can also be regulated on the hose handle by opening/closing the vent.

Features of the Modelys range

A Mains cable

B Cable rewind button

C Mechanical s-bag

TM

full indicator

D Hose connection

E Carrying handle

F Cover release catch for s-bag

TM

compartment

G Cover release for accessory compartment

H On/off button

I Parking position for tube and nozzle when in use

J Storage slot for tube and nozzle when not in use

K Suction control regulator

Getting the best results

Carpets: Use floor nozzle with lever in this position.

Hard floors: Use floor nozzle with lever in this position.

Loose rugs/curtains/lightweight fabrics: Reduce the suction power. Use

the floor nozzle for loose rugs and the upholstery nozzle for curtains,

cushions etc.

Confined areas: Use the crevice nozzle for tight corners and radiators etc.

Hard floor/Parquetry: use the hard floor nozzle to avoid scratching (some

models).