Volt VFL-4602-BBZ, VFL-4601-BBZ Installation Instructions Manual

INSTALLATION INSTRUCTIONS

VOLT® Low Voltage Landscape Lighting

VOLT

®

Integrated LED Gentle & Big Splash

VFL-4601-BBZ & VFL-4602-BBZ

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

Specications and product details subject to change without notice.

© Copyrigwht 2019, VOLT® Lighting, Lutz FL USA 33549 • All rights

reserved. [e-mail] • 813.978.3700

- 1 -

INSTALLATION INSTRUCTIONS

VOLT® Integrated LED Gentle & Big Splash
VFL-4601-BBZ & VFL-4602-BBZ

Package Contents

A. (1) Fixture Body

Important: Please Read Before Installation

!

This xture is intended for installation in accordance with local codes
and the National Electric Code (NEC). Failure to adhere to these codes
and instructions may result in serious injury, property damage and void
the warranty.

These instructions do not intend to cover all variations in installation,
operation maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing
this xture.

2. Warning: this xture is not intended to be installed within 10 feet [3
meters] of a pool, spa or fountain.

3. This xture is intended to be used only with a power supply
(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Underground Low Energy Cable must not be buried over 6” (15.2 cm) in
order to connect to the main low voltage cable.

5. Wiring connections must be made with wire connectors that are suitable
for outdoor use.

6. Position the wire connector so that it is located within 6 inches (15.2
cm) from a building structure, a luminaire, or tting.

!

WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.

1. Turn o/unplug and allow to cool before reducing lamp.

2. Lamp gets HOT quickly!

3. Do not touch the hot lens, guard or cowl.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time.

6. Use a soft cloth.

7. Oil from skin may damage lamp.

8. Do not operate the xture with a damaged or missing lens or shield.

Important Safety Instructions

LIGHTED LAMP IS HOT!

B. (1) Stake

Product Dimensions

Install Stake

1

Stake

Ground

Soil

Board

3.25”

2.5”

Determine your desired location for
mounting the xture. Hammer the
stake into the ground until ange
of stake is ush to grade. To avoid
damage to the stake, place a board on
top of the stake while hammering.

NOTE: If the ground is hard and the
stake is dicult to install, make a
crosscut in the ground using a at
shovel.

2.5”

1.5”

www.voltlighting.com

- 2 - - 3 -

[e-mail] • 813.978.3700