Volt VFL-4002-ABZ, VFL-4006-ABZ, VFL-4004-ABZ, VFL-12V Series Installation Instructions Manual
INSTALLATION INSTRUCTIONS
VOLT® Low Voltage Landscape Lighting
VOLT® LED Floodlights
VFL-12V Series
Help Hotline:
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)
Specications and product details subject to change without notice.
© Copyright 2017, VOLT® Lighting, Lutz FL USA 33549 • All rights reserved.
customersupport@voltlighting.com • 813.978.3700
- 1 -
INSTALLATION INSTRUCTIONS
VOLT® Low Voltage Landscape Lighting
VFL 12V Floodlights
Important: Please Read Before Installation
!
This luminaire is intended for installation in accordance with local codes and the
National Electric Code (NEC). Failure to adhere to these codes and instructions may
result in serious injury, property damage and void the warranty.
These instructions do not intend to cover all variations in installation, operation
maintenance or mounting situation.
1. Make sure that the power is turned OFF before installing or servicing this
luminaire.
2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or more
from pool, spa or fountain.
3. This luminaire is intended to be used only with a power supply (transformer)
rated maximum of 300 watts (25 AMPS) at 15 volts.
4. Wiring connections must be made with wire connectors that are suitable for
outdoor use.
5. Position the low voltage wire and wire connector so that it is located within 6
inches (15.2 cm) from a building structure, a luminaire or tting.
6. The main low voltage cable is intended for shallow burial - less than 6 inches
(152 mm)
7. If additional lengths of low voltage cable are required, please contact www.
voltlighting.com or call 1-813-978-3700.
Important Safety Instructions
!
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
Lighted lamp is HOT!
WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.
1. Turn off/unplug and allow to cool before replacing lamp.
2. Lamp gets HOT quickly! Contact only switch/plug when turning on.
3. Do not touch the hot lens, guard or enclosure.
4. Keep lamp away from materials that may burn.
5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may damage
lamp.
6. Do not operate the luminaire tting with a missing or damaged shield.
SAVE THESE INSTRUCTIONS
www.voltlighting.com
- 2 -
Package Contents
A. (1) Lampbody
B. (1) Stake
C. (1) Coupler
D. (1) Hex Nut
Products Model #
Model
VFL-4002-ABZ
VFL-4006-ABZ 7W 0.57A
Input
Voltage
12V ≥0.95
Power
Factor
Watt
10W 0.75A
Product Dimensions
0.45”
Input
Current
1.29”
Mounting
YokeVFL-4004-ABZ 30W 2.3A
5.59”
0.77”
4.25”
VFL-4002-ABZ
VFL-4006-ABZ
1.89”
2.79”
4.52”
4.23”
0.83”
6.25”
8”
VFL-4004-ABZ
customersupport@voltlighting.com • 813.978.3700
- 3 -
2.67”
5.21”
9”
8.12”
Loading...