Volt VDL-6009-4-BBZ Installation Instructions Manual

INSTALLATION INSTRUCTIONS

VOLT® Low Voltage Landscape Lighting

VOLT® Dojo Deck Light

VDL-6009-4-BBZ

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

Specications and product details subject to change without notice.

© Copyright 2019, VOLT® Lighting, Lutz FL USA 33549 • All rights reserved.

[e-mail] • 813.978.3700

- 1 -

INSTALLATION INSTRUCTIONS

VOLT® Dojo Deck Light
VDL-6009-4-BBZ

Important: Please Read Before Installation

!

This xture is intended for installation in accordance with local codes and
the National Electric Code (NEC). Failure to adhere to these codes and
instructions may result in serious injury, property damage and void the
warranty.

These instructions do not intend to cover all variations in installation,
operation maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing
this xture.

2. Warning: this xture is not intended to be installed within 10 feet [3
meters] of a pool, spa or fountain.

3. This xture is intended to be connected to a low voltage transformer.

4. Underground Low Energy Cable must not be buried over 6” (15.2 cm)
in order to connect to the main low voltage cable.

5. Wire connections must be made with UL listed wire connectors that
are suitable for outdoor use.

Package Contents

A. (1) Fixture Body

Product Dimensions

3.5”

B. (2) Lock Screw

1.75”

3”

Important Safety Instructions

!

LIGHTED LAMP IS HOT!

WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly!

3. Do not touch the hot lens, guard or cowl.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time.

6. Use a soft cloth.

7. Oil from skin may damage lamp.

8. Do not operate the xture with a damaged or missing lens or shield.

www.voltlighting.com

ProTip for Hiding Lead Wire

Determine the location for the xture. Drill a hole straight through the
desired mounting location and run the lead wire out the backside of
the location so that the wires are not visible from the front side. Use a
matching trim piece and cut a groove in the back of trim. Cover the lead
wires with the matching trim piece.

ProTip for Hiding Splice Connections

All xtures come with 4’ of lead wire enabling you to hide the splice
connections out of sight. If you must make a splice connection in view, use
an inline heat shrink style connection that is less visible than traditional
twist caps.

[e-mail] • 813.978.3700

- 3 -- 2 -