Volt Belladonna LED Path/Area Installation Instructions Manual

INSTALLATION INSTRUCTIONS

VOLT® Low Voltage Landscape Lighting

Belladonna LED Path/Area

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

Specications and product details subject to change without notice.

© Copyright 2014, VOLT® Lighting, Lutz FL USA 33549 • All rights reserved.

[e-mail] • 813.978.3700

INSTALLATION INSTRUCTIONS

VOLT® Belladonna LED Path/Area
VL-1024

Important: Please Read Before Installation

!

This xture is intended for installation in accordance with local codes and
the National Electric Code (NEC). Failure to adhere to these codes and
instructions may result in serious injury, property damage and void the
warranty.

These instructions do not intend to cover all variations in installation, oper­ation maintenance or mounting situation.

1. Make sure that the power is turned OFF before installing or servicing
this xture.

2. Warning: this xture is not intended to be installed within 10 feet [3
meters] of a pool, spa or fountain.

3. This xture is intended to be used only with a power supply (trans­former) rated maximum of 50 watts (25 AMPS) at 12 volts.

4. Underground Low Energy Cable must not be buried over 6” (15.2 cm)
in order to connect to the main low voltage cable.

5. Wiring connections must be made with wire connectors that is suitable
for outdoor use.

6. Position the wire connector so that it is located within 6 inches (15.2
cm) from a building structure, a luminaire, or tting.

Important Safety Instructions

!

LIGHTED LAMP IS HOT!

WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.

1. Turn o/unplug and allow to cool before reducing lamp.

2. Lamp gets HOT quickly!

3. Do not touch the hot lens, guard or cowl.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time.

6. Use a soft cloth.

7. Oil from skin may damage lamp.

8. Do not operate the xture with a damaged or missing lens or shield.

www.voltlighting.com