Vollrath PLC-12 User Manual

vollrathco.com

Buffet and Tabletop Service

Custom Platter and Plate Covers

Sizing and Imprinting

Ordering Instructions:

Oval Platter Covers

1) Measure width & length of plate.

2) Check the PLC range where both dimensions fall and
select the proper part number and note this on your
purchase order. Note: If plate falls into two PLC
ranges, select the higher PLC part number.

Minimum order quantity is 24

Oval Platter Cover

Vollrath introduces stainless steel oval platter covers to its
line of custom covers. Platter & plate covers keep food at
proper serving temperature for customer satisfaction.

■

Satin-fi nished stainless steel for longer life

■

Custom fi t for stability during transport

■

Tapered side walls to ensure stackability when in storage

■

Finger hole for easy removal

■

Optional mirror-fi nish for adding elegance

■

Extended heights available on request

Round Plate Covers

1) Measure fi ve plates at their widest point.
Choose the largest one.

2) Select the part number based on
plate diameter.

PLATTER WIDTH

IN (CM)

81⁄4 to 111⁄4

(20.9 to 28.5)

95⁄8 to 123⁄8

(24.4 to 31.4)

107⁄8 to 133⁄8

(27.6 to 34.0)

PLATTER LENGTH

IN (CM)

93⁄8 to 123⁄8

(23.8 to 31.4)

105⁄8 to 133⁄8

(26.9 to 33.9)

121⁄8 to 155⁄8

(30.8 to 39.7)

Instructions Continue Below

COVER HEIGHT

IN (CM)

2

(5.08)

2

(5.08)

23⁄4

(6.99)

PART

NUMBER

PLC-15

PLC-16

PLC-17

CASE

LOT

12

12

12

3) Send the largest platter/plate sample with your purchase
order to The Vollrath Company, L.L.C.
Attn: Customer Service, 1236 N. 18th St., Door #1,
Sheboygan, WI 53082-0611. Samples are required for orders
greater than 144 but are recommended for all orders.

4) After we receive the sample and purchase order,
we will acknowledge the order with a new part number.

5) We will confi rm model numbers and pricing. Vollrath will only

guarantee pricing on orders that have been submitted with
sample plates. Order fulfi llment is not guaranteed.

PLATE DIAMETER

711⁄16" (19.5 cm) to 9" (22.86 cm) 25⁄16 (5.9)
9" (22.9 cm) to 10" (25.4 cm) 25⁄16 (5.9)
101⁄16" (25.6 cm) to 11" (27.9 cm) 25⁄16 (5.9)
111⁄16" (28.1 cm) to 12" (30.5 cm) 213⁄16 (7.1)
121⁄16" (30.6 cm) to 123⁄4" (32.4 cm) 213⁄16 (7.1)

Instructions Continue Below

Round Plate Cover

COVER HEIGHT

IN (CM)

PART

NUMBER

PLC-08
PLC-09
PLC-10
PLC-11
PLC-12

CASE

LOT

12
12
12
12
12

6) Custom covers will be slightly larger in diameter
than sample plate provided to compensate for
normal variations. We cannot guarantee our platter
covers will stack solidly if platters are warped.

7) Lead time: 3 Weeks after receipt of purchase order.

8) Mirror-fi nish: Add "-M" to part number. (ie: PLC-15-M)
Additional charge applies.

Note: Custom Plate Covers cannot be cancelled or returned. Custom

product orders are completed with over/under shipments not to exceed
plus or minus 10% of the original order quantity

4-60