Vollrath Mirage Induction Rethermalizers User Manual
ENGLISH
Operator’s Manual
MIRAGE® INDUCTION RETHERMALIZER
Item Description Voltage Watts Amps Plug
7470110 7 Qt. Induction Rethermalizer, Natural 120V 800W 6.7 5-15P
7470140 7 Qt. Induction Rethermalizer, Red 120V 800W 6.7 5-15P
74110110 11 Qt. Induction Rethermalizer, Natural 120V 800W 6.7 5-15P
74110140 11 Qt. Induction Rethermalizer, Red 120V 800W 6.7 5-15P
Thank you for purchasing this Vollrath Equipment. Before operating the equipment, read and familiarize yourself with the following operating
and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging. Use this
packaging to ship the equipment if repairs are needed.
RegisteR youR pRoduct on-line at www.vollRath.com
Item No. 2350190-1 en Rev 04/14
Safety PrecautionS
To ensure safe operation, read the following statements and
understand their meaning. This manual contains safety precautions
which are explained below. Please read carefully.
WARNING
Warning is used to indicate the presence of a hazard that can cause
severe personal injury, death, or substantial property damage if the
warning is ignored.
function and PurPoSe
This equipment is intended to rethermalize containers of refrigerated,
previously cooked food and hold containers of hot food at safe serving
temperatures. Use only Vollrath induction-ready insets (item 88184 or
88204). Failure to use Vollrath Induction-ready insets may damage unit
and void the warranty. This equipment is not intended or designed to cook
raw food product. Before using this equipment it must be cleaned and dried
thoroughly. This equipment is not intended for household, industrial or
laboratory use.
inStallation
CAUTION
Caution is used to indicate the presence of a hazard that will or can
cause minor personal injury or property damage if the caution is
ignored.
NOTE
Note is used to notify people of installation, operation, or
maintenance information that is important but not hazard-related.
For Your Safety!
These precautions should be followed at all times. Failure to follow
these precautions could result in injury to yourself and others.
To reduce risk of injury or damage to the unit:
Plug only into grounded electrical outlets matching the nameplate rated
voltage. Each induction unit should have a separate circuit.
Do not use an extension cord with this equipment. Do not plug this
ENGLISH
equipment into a power strip or multi-outlet power cord.
As a precaution, persons using a pacemaker should stand back 12”
(30 cm) from an operating unit. Studies have shown that the induction
element will not disrupt a pacemaker.
Keep all credit cards, driver licences and other items with a magnetic
strip away from an operating unit. The unit’s magnetic eld will damage
the information on these strips.
Do not put water in the warmer/rethermalizer. It is intended to run dry.
Water will damage the unit and void the warranty.
Use only Vollrath induction-ready insets with this unit. Failure to use
Vollrath Induction-ready insets may damage unit and void the warranty.
Unit should only be used in a at, level position.
Unplug unit and let it cool before cleaning or moving.
Do not spray controls or outside of unit with liquids or cleaning agents.
Unplug when not in use.
Keep unit and power cord away from open ames, electric burners or
excessive heat.
Do not operate unattended.
Closely supervise units operating in public areas and/or around
children.
Do not operate if unit has been damaged or is malfunctioning in any
way.
This unit is to be used on a at, solid, and level surface.
NOTE:
This unit is not designed to be inclosed or built into any area.
Sufcient airow must be allowed around the unit. Blocking the
airow could cause the unit to overheat.
1. Place the induction on a at, solid, and stable surface.
2. Plug the power cord into a grounded electrical outlet with the matching
nameplate rated voltage.
NOTE:
Using a voltage other than the nameplate rated voltage will cause
damage to the unit. Incorrect voltage, modication to the power
cord or electrical components can damage unit and will void the
warranty.
oPeration
WARNING
Electrical Shock Hazard.
Keep water and other liquids from entering the
inside of the unit. Liquid inside the unit could cause
an electrical shock.
NOTE:
Do not pre-heat empty insets. Because of the speed and efciency
of the induction range, insets can very quickly overheat and be
damaged.
WARNING
Burn Hazard.
Do not touch cookware, heating surface, food, or
liquid while heating.
Hot food and liquids can burn skin. Induction heating surfaces heat
very rapidly. Use caution when adding pre-heated oil, liquid or other
food already in the cookware.
NOTE:
Do not put water in the warmer/rethermalizer. It is intended to run
dry. Water will damage the unit and void the warranty.
NOTE:
Removal of induction-ready inset will cause the display to blink.
Reinserting the induction-ready inset will cause the display to
remain constant.
2
OperatOr’s Manual
Loading...