Vollrath KDC1418-4R-06 User Manual
Installation Instructions
A
F
G
E
B
D
C
H
I
E
A
F
G
A
Bakery Case Assembly Instructions
Item# KDC1418-4R-06 (Rear Doors)
ITEM PART
A N/A 14 Phillips Head Machine Screws (order 57981)
B N/A 2 Self-Locking Nuts (order 57981)
C 8013571 2 Clear Handles
D 8013031 6 Post and Screws
E BC198B 1 Right Side Panel (with door)
F BC178B 1 Short Bent Top Panel
G BC177B 1 Large Bent Bottom Panel
H BC189B 1 Front Panel
I 86128 4 Trays
1. Remove the bakery case and hardware from packaging.
PLEASE READ INSTRUCTION AND IDENTIFY ALL PARTS BEFORE
ASSEMBLY.
CAUTION: To ensure correct assembly read the following instructions and
2. Remove protective masking from display prior to assembly.
3. Lay one side panel (E) with rails facing up, at on table and attach short
bent top panel (F) using (3) machine screws (A). See Figure 2.
understand their meaning before beginning. Please read carefully. Handle all
parts carefully to prevent injury or damage. Although edges and corners have
been deburred, they should still be considered sharp.
NOTE: DO NOT OVERTIGHTEN SCREWS AND HARDWARE.
Tools Needed:
1 Medium Size Flat Head or Phillips screwdriver.
1 Clean cloth to cover work surface, this prevents the case from scratching
during assembly.
The bakery case contains the following parts:
NUMBER
QTY: DESCRIPTION
BC199B 1 Left Side Panel (with door)
with (4) Clear Rubber Feet
57981 1 Hardware Kit (Includes items A, B, C, and D)
Figure 1. Bakery Case Parts
www.Vollrath.com
Figure 2. Install Short Bent Top Panel
4. Repeat the process attaching the large bent bottom panel (G) using (3)
machine screws (A). See Figure 3.
Figure 3. Install Large Bent Bottom Panel
Item No. 2350242-1 Rev 09/14
5. With rails facing inward, gently attach opposite side panel (E) to display
using (6) machine screws (A). See Figure 4.
E
CAUTION
DO NOT overtighten screws and hardware.
7. Attach clear handles (C) to rear doors using machine screws (A) and self-
A
locking nuts (B). See Figure 6.
Figure 4. Install Opposite Side Panel
6. Carefully place front panel (H) onto side panels (E), and attach with (6) post
and screws (D). See Figure 5.
C
B
A
Figure 5. Install Front Panel
Figure 6. Install Handles
8. Open both rear doors, and install four trays.
9. Clean using very soft cloth and clean water. Avoid abrasive chemical and
E
glass cleaners, ie: Windex®, Simple Green®. Clean using warm water and a
dilute mild dish soap (Dawn® or Joy®). Wipe acrylic lightly using soap mixture
and rinse with plain water using a soft cloth. A microber towel or clean
chamois is preferred. DO NOT USE PAPER TOWELS!
D
H
www.Vollrath.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201
U.S.A.
Main Tel: 920.457.4851
Fax: 800.752.5620
Technical Services: 800.628.0832
Service Fax: 920.459.5462
Canada Service: 800.695.8560
© 2014 The Vollrath Company, L.L.C.
Loading...