Vollrath KDC1418-3-06 User Manual
Bakery Case Assembly Instructions
Installation Instructions
Item# KDC1418-3-06
ITEM PART
A N/A 17 Phillips Head Machine Screws (order 57979)
B N/A 5 Self-Locking Nuts (order 57979)
C 8013571 5 Clear Handles
D 8013031 6 Post and Screws (Included with Front Door
E BC183B 1 Right Side Panel (with door)
F BC182B 1 Short Bent Top Panel
G BC181B 1 Large Bent Bottom Panel with (4) Clear
H BC179B 3 Front Door Panels
I 86128 3 Trays
1. Remove the bakery case and hardware from packaging.
2. Remove protective masking from display prior to assembly.
PLEASE READ INSTRUCTION AND IDENTIFY ALL PARTS BEFORE
ASSEMBLY.
3. Lay one side panel (E) with rails facing up, at on table and attach large
bent bottom panel (G) using (3) machine screws (A). See Figure 2.
CAUTION: To ensure correct assembly read the following instructions and
understand their meaning before beginning. Please read carefully. Handle all
parts carefully to prevent injury or damage. Although edges and corners have
been deburred, they should still be considered sharp.
NOTE: DO NOT OVERTIGHTEN SCREWS AND HARDWARE.
Tools Needed:
1 Medium Size Flat Head or Phillips screwdriver.
1 Clean cloth to cover work surface, this prevents the case from scratching
during assembly.
The bakery case contains the following parts:
NUMBER
QTY: DESCRIPTION
Panels)
BC184B 1 Left Side Panel (with door)
Rubber Feet
57979 1 Hardware Kit (Includes items A, B, C, and D)
G
E
A
E
H
Figure 1. Bakery Case Parts
www.Vollrath.com
B
G
C
D
F
A
Figure 2. Install Large Bent Bottom Panel
I
Item No. 2350240-1 Rev 09/14
4. Repeat the process attaching the small bent top panel (F) using (3) machine
screws (A). See Figure 3.
F
CAUTION
DO NOT overtighten screws and hardware.
6. Attach clear handles (C) to front door panels (H) and both rear doors using
machine screws (A) and self-locking nuts (B). See Figure 5.
H
A
C
B
A
Figure 5. Install Handles
7. Connect (3) front door panels (H) to side panels (E) using clear post and
Figure 3. Install Small Bent Top Panel
5. With rails facing inward, gently attach opposite side panel (E) to display
using (6) machine screws (A). See Figure 4.
E
A
Figure 6. Install Front Door Panels
8. Open each front door and install trays.
9. Clean using very soft cloth and clean water. Avoid abrasive chemical and
screw sets (D). See Figure 6.
H
D
E
glass cleaners, ie: Windex®, Simple Green®. Clean using warm water and a
dilute mild dish soap (Dawn® or Joy®). Wipe acrylic lightly using soap mixture
and rinse with plain water using a soft cloth. A microber towel or clean
chamois is preferred. DO NOT USE PAPER TOWELS!
Figure 4. Install Opposite Side Panel
www.Vollrath.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201
U.S.A.
Main Tel: 920.457.4851
Fax: 800.752.5620
Technical Services: 800.628.0832
Service Fax: 920.459.5462
Canada Service: 800.695.8560
© 2014 The Vollrath Company, L.L.C.
Loading...