Vollrath JT2B, JT2000 Operator's Manual

Operator’s Manual

Conveyor Bagel and Bun Toasters, 1200 Slices Per Hour*

Model JT2B

Thank you for purchasing this Vollrath equipment. Before operating the
equipment, read and familiarize yourself with the following operating
and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. Save the original box and packaging. Use this packaging
to ship the equipment if repairs are needed.

SAFETY PRECAUTIONS

To ensure safe operation, read the following statements and understand
their meaning. This manual contains safety precautions which are
explained below. Please read carefully.

WARNING

Warning is used to indicate the presence of a hazard that will or can
cause severe personal injury or death.

CAUTION

Caution is used to indicate the presence of a hazard that will or can
cause minor or major personal injury if the caution is ignored.

NOTICE: Notice is used to note information that is important but not

hazard-related.

To reduce risk of injury or damage to the equipment

• Plug only into grounded electrical outlets matching the voltage on
the rating plate.

• Use this equipment in a flat, level position.

• Unplug equipment and let it cool before cleaning or moving.
Equipment remains hot after it is turned off.

• Do not touch during operation.

• Unplug when not in use.

• Keep equipment and power cord away from open flames, electric
burners or excessive heat.

• Do not operate unattended.

• Closely supervise equipment operating in public areas and/or
around children.

• Do not operate if equipment has been damaged or is malfunctioning
in any way.

Slices Per

Hour*

Item No. Model Voltage

CT4B-2081200
CT4B-2401200 240

* Slices per hour is based on maximum conveyor speed. Conveyor speed deter-

mines toasting time and affects color and texture of the toast. Results may
vary based upon type of bread, color and texture preference.

JT2B

208

(Up to)

1200

Plug

NEMA
6-20P

CLEARANCE AND ENVIRONMENT REQUIREMENTS

Do not place on surfaces or near walls, partitions or kitchen furniture
unless they are made of non-combustible material or clad with non­combustible heat-insulating material. Toasters must not be used near
or below curtains and other combustible materials.

Do not place the toaster adjacent to a heat producing appliance.

SET UP

1. Place the toaster on a hard, flat, stable surface.

2. Turn the toaster on it’s side with the bottom facing you.

3. Install the collection pan by placing the back edge of the pan on the
lip at the back of the toaster. Line up the hole in the pan with the
screw. Tighten the screw to secure the collection pan.

FUNCTION AND PURPOSE

This equipment is intended to toast bread products. It is intended for
use in commercial foodservice operations only. It is not intended for
household, industrial or laboratory use.

©

2018 The Vollrath Company L.L.C. Part No. 350803-1 ml 12/17/18

FEATURES BEFORE FIRST USE

1. Clean the toaster. See “Cleaning” on page 3.

OPERATION

C

D

NOTICE: The crumb tray must be installed in the toaster during

A
B

E

Front View

Preheat

1. Plug the toaster into a grounded electrical outlet that matches the
rating on the name plate found on the back of the toaster.

NOTICE: Using a voltage other than the nameplate rated voltage

2. Rotate the power knob to the full power position (I).

3. Set the conveyor speed control knob to 7.

4. Wait 5 minutes for the toaster to preheat.

CAUTION

Burn Hazard

Do not touch the equipment while it is heating or operating.
Hot surfaces can burn skin.

operation. Failure to install the crumb tray will cause the
toaster to overheat.

will cause damage to the unit. Incorrect voltage,
modification to the power cord or electrical components
can damage unit and will void the warranty.

Test

1. Adjust the settings for the bread to be toasted. Test the settings by
placing a sample of the bread items to be toasted onto the feed
ramp.

F

2. Evaluate the results.

Tips

Back View

A Conveyor Speed Control Knob
B Power Knob

Full Power - maximum heat
Off
Standby - reduces electrical consumption by 75%.

C Feed Ramp
D Crumb Tray
E Collection Pan
F Reset Button - Reference only. Access is via the front of the

toasters. See page 4.

Bread Product Suggestions

Bagels, wheat or rye bread or
products with high moisture
content.

Buttered or coated, such as
pastries

Frozen Must be thawed before toasting.

Use a slower conveyor speed.

Not recommended.

Toast

1. Adjust the conveyor speed as needed.

• Toast too light: Rotate the speed control knob to a lower number

to reduce the speed and darken the toast.

• Toast too dark: Rotate the speed control knob to a higher number

to increase the speed control and lighten the toast.

2. For best performance do not overload the toaster. Wait a few
seconds before loading a second row of bread into the toaster.

If an Item Becomes Stuck

1. Rotate the power knob to the OFF position (O) and unplug the
equipment.

2. Let the equipment cool completely. Use tongs to remove the item.
Take care to not bump the heating elements above and below the
conveyor.

2 Conveyor Bagel and Bun Toasters, 1200 Slices Per Hour* Operator’s Manual – Model JT2B

CLEANING

Daily Cleaning

WARNING

Electrical Shock Hazard

Do not spray water or cleaning products. Liquid could contact
the electrical components and cause a short circuit or an
electrical shock.

CAUTION

Burn Hazard

Allow equipment to cool before moving or cleaning.

NOTICE: Do not use abrasive materials, scratching cleansers or

scouring pads to clean the exterior of the equipment. These
can damage the finish.

NOTICE: Heating elements do not need to be cleaned. Crumbs and

food debris will burn off. Over time the heating elements
may develop a chalky appearance, but this will not impact
performance.

1. Before turning off the equipment and with the conveyor rotating,
watch the conveyor belt for food debris.

2. When the food debris reaches the front of the conveyor, rotate the
power knob to the OFF position.

3. Wait for the fan to stop running. Unplug the equipment.

4. Let the equipment cool completely.

5. When the equipment is cool, use a brush or scrub pad to remove the
food debris.

6. To clean the exterior, use a soft cloth dipped in hot soapy water to
wipe the exterior and fan air intake under the equipment. If needed,
wipe the fan intake area with degreaser to prevent long term build up.

7. Empty and clean the crumb tray(s).

PREVENTATIVE MAINTENANCE

Contact an authorized service agent for a professional cleaning of the components.

TROUBLESHOOTING

Problem Might be Caused By Course of Action

Toaster does not heat and the
conveyor belt does not move.

Toaster is not plugged in. Plug in the toaster.
Power knob setting is incorrect. Rotate the power knob to the ON (|) position.
The wall breaker may be tripped.

The reset may be tripped. Look under the toaster to see if an object is preventing the fan

1. Inspect for tripped breaker.

2. Reset the breaker.

3. If the breaker was not tripped, inspect the toasting chamber for
broken heater tubes.

For broken tubes, contact Vollrath Technical Services.

blades from turning.

1. Rotate the heat control knobs to the OFF position.

2. Rotate the power knob to the OFF (O) position.

3. Unplug the toaster.

4. Wait 30 minutes for the toaster cool.

5. Remove the object.

6. Plug in the toaster.

7. Rotate the power knob to the ON (|) position.

8. Press the reset button. You should hear and feel the button
reset. The toaster should start to operate.

9. If the problem persists call Vollrath Technical Services.

Conveyor Bagel and Bun Toasters, 1200 Slices Per Hour* Operator’s Manual – Model JT2B 3

Problem Might be Caused By Course of Action

Toaster does not heat and the
conveyor belt does not move.

Toaster heats and the conveyor belt
does not move.

Top or bottom heater tubes do not
heat.

Toaster repeatedly overheats.

The fan is not running.

The toaster is turned off and the fan
is running.

The reset may be tripped. Inspect the fan blades to see if they are dirty.

There may be a problem with the motor/
speed control or drive chain.

One or more heater tubes may have
burned out.

Heat control switch may be broken.
The crumb tray may not be installed. Verify the crumb tray is installed.

The fan may be dirty.

There may be a problem with the fan.

There may be a problem with the fan or
the fan switch.

Normal operation. The fan turns on as
needed to cool the toaster.

1. Rotate the heat control knobs to the OFF position.

2. Rotate the power knob to the OFF (O) position.

3. Unplug the toaster.

4. Wait 30 minutes for the toaster cool.

5. Clean the fan blades.

6. Plug in the toaster.

7. Rotate the power knob to the ON (|) position.

8. Press the reset button.

9. If the problem persists call Vollrath Technical Services.

Contact Vollrath Technical Services.

Contact Vollrath Technical Services.

Verify the fan blades are clean. See instructions above for
inspecting and cleaning the fan blades.

Run the toaster for 10 minutes. If the fan does not run, contact
Vollrath Technical Services.

Run the toaster for 10 minutes. If the fan does not run, contact
Vollrath Technical Services.

_

SERVICE AND REPAIR

When under warranty, repair is available for this product. To begin the process:

1. Contact Vollrath Technical Services at 1-800-309-2250. Please be ready with the item number, model number and serial number. You can find this
information on the nameplate located on the side or back of the equipment. Also please provide a proof of purchase indicating the date the
equipment was purchased.

2. A technical services representative will help you troubleshoot the problem over the phone.

3. If the representative determines the issue requires professional service, he or she will help you locate an authorized service center.

4. Contact the authorized service center to make arrangements for the repair. Vollrath will cover the cost to repair and/or replace defective parts
within the equipment warranty period.

WARRANTY STATEMENT FOR THE VOLLRATH CO. L.L.C.

The Vollrath Company LLC warrants the products it manufactures or distributes against defects in materials and workmanship as specifically
described in our full warranty statement. In all cases, the warranty runs from the date of the end user’s original purchase date found on the receipt.
Any damages from improper use, abuse, modification or damage resulting from improper packaging during return shipment for warranty repair will
not be covered under warranty.

The warranty does not apply to products purchased for personal, family or household use, and The Vollrath Company LLC does not offer a written
warranty to purchasers for such uses.

Warrantied Parts: The warranty period is 2 years parts, 1 year labor.
Heater Tubes: The warranty period is 1 year, including labor. Heater tube glass damage is not covered by this warranty.
For complete warranty information, product registration and new product announcements, visit www.vollrath.com.

www.vollrath.com

The Vollrath Company, L.L.C.

1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Main Tel: [phone] or 920.457.4851
Main Fax: [phone] or 920.459.6573
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560

©

2018 The Vollrath Company L.L.C. Part No. 350803-1 ml 12/17/18

Technical Services
[e-mail]
Toasters: 1-800-309-2250
All Other Products: 800.628.0832