Vollrath 36640 User Manual

Short Side Hot Drop-ins

The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201
U.S.A.
Main Tel: [phone]
Service Tel: [phone]
FAX: [phone]

Vollrath of Canada, Co.
Tel: [phone]
FAX: [phone]

www.vollrathco.com

Agency Certifications

Approvals

Date:

Short Side Drop-In: Three Well Hot

DESCRIPTION

The modular drop-in is designed for top-mount installation and does
not require hard-wiring. The drop-in comes complete with a 6-ft.
(182.8 cm) power cord with plug and a 4-ft. (121.9 cm) control cord
for remote installation.

Full-perimeter drip-edge contains spills and condensation within the
stainless steel countertop area of the drop-in. Drip-edge adds
additional strength to the flange area.

Drop-in can operate wet or dry, however, moist operation is
recommended for even heating of the food product. Meets NSF4
performance standards when using moist heat.

High-density glass-fiber insulation allows zero-clearance installation
and use of 625W elements for lower energy consumption and reduced
costs. Also available with 750 - 1000W elements.

Stainless steel wells are 6³⁄₈" (16.19 cm) deep to allow use of full-size
and fractional pans up to 6" (15.24 cm) deep while still providing moist
heat. Adaptor bars are recommended when using fractional pans.

FEATURES

❑ Top is 18-gauge stainless steel, with ³⁄₈" (9.52 mm) overhang on

all sides and die-stamped with full-perimeter drip-edge, and
19⁷⁄₈" x 11⁷⁄₈" (50.48 x 30.16 cm) openings.

❑ Breaker gasket included for installation under drip-edge.
❑ Flat work surface around opening.
❑ Deep drawn well is 20-gauge stainless steel, 6³⁄₈" (16.19 cm)

deep.

❑ Standard 750 - 1000W or 625W heating elements.
❑ Infinite or thermostatic control.

Project:

Item Number:

Quantity:

MODELS

750 - 1000W Per Well 625W Per Well

Control DrainItem Voltage Amps Plug Item V Amps Plug

Two We ll

36646 208-240 7.2 - 8.3 6-15P 36640 120 10.4 5-15P Ther mostatic Standard

3664620 208-240 7.2 - 8.3 6-15P 3664020 120 10.4 5-15P Thermostatic Manifold

3664630 208-240 7.2 - 8.3 6-15P 3664030 120 10.4 5-15P Thermostatic

36647 208-240 7.2 - 8.3 6-15P 36641 120 10.4 5-15P Infinite Standard

3664720 208-240 7.2 - 8.3 6-15P 3664120 120 10.4 5-15P Infinite Manifold

3664730 208-240 7.2 - 8.3 6-15P 3664130 120 10.4 5-15P Infinite

Three Well

36648 208-240 10.8 - 12.5 6-20P 36642 120 15.6 5-20P Thermostatic Standard

3664820 208-240 10.8 - 12.5 6-20P 3664220 120 1 5.6 5-20P Thermostatic Manifold

3664830 208-240 10.8 - 12.5 6-20P 3664230 120 1 5.6 5-20P Ther mostatic

36649 208-240 10.8 - 12.5 6-20P 36643 120 15.6 5-20P Infinite Standard

3664920 208-240 10.8 - 12.5 6-20P 3664320 120 1 5.6 5-20P Infinite Manifold

3664930 208-240 10.8 - 12.5 6-20P 3664330 120 15.6 5-20P Infinite

Four Well

36650 208-240 14.4 - 16.7 6-30P 36644 120 20.8 5-30P Ther mostatic Standard

3665020 208-240 14.4 - 16.7 6-30P 3664420 120 2 0.8 5-30P Ther mostatic Manifold

3665030 208-240 14.4 - 16.7 6-30P 3664430 120 2 0.8 5-30P Ther mostatic

36651 208-240 14.4 - 16.7 6-30P 36645 120 20.8 5-30P Infinite Standard

3665120 208-240 14.4 - 16.7 6-30P 3664520 120 2 0.8 5-30P Infinite Manifold

3665130 208-240 14.4 - 16.7 6-30P 3664530 120 2 0.8 5-30P Infinite

Manifold
& Autofill

Manifold
& Autofill

Manifold
& Autofill

Manifold
& Autofill

Manifold
& Autofill

Manifold
& Autofill

FEATURES (CONTINUED)

❑ Power indicator light.
❑ Standard drain is ½" (1.27 cm) stainless steel fitting welded to

pan with ball valve shutoff below exterior housing.

❑ Manifold drain option is 1" (2.54 cm) copper tubing and retains

individual well shut-off and adds manifold shutoff.

❑ Unit insulated on sides, between wells, and below element

assembly with high-density glass fiber insulation.

❑ Exterior housing is 20-gauge galvanized steel.
❑ Drop-in is supplied with stainless steel control panel connected

to bottom of unit for shipping.

❑ Control panel may remain on unit or be remote mounted.
❑ Control wires contained in flexible rubber cord.
❑ Unit comes with cord and plug and does not require

hard-wiring installation.

❑ Positioning clips provided to center drop-in within cutout.
❑ Standard mounting clips adjustable for up to 3" (7.62 cm) thick

counters.

❑ Full one-year parts and labor warranty.

Short Side Hot Drop-ins

The Vollrath Company, L.L.C.

Short Side Hot Drop-ins

www.vollrathco.com

The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201
U.S.A.
Main Tel: [phone]
Service Tel: [phone]
FAX: [phone]

Vollrath of Canada, Co.
Tel: [phone]
FAX: [phone]

Control Panel Cutout

+.063/-0 (+.160/-0) Tolerance

Dimensions shown in inches (centimeters).

Note: Opening cutout must have a .875 (2.2 cm) radius at four corners

20.0 Ref

(50.80)

12.0 REF

(30.48)

3.31

(8.41)

1.56

(3.96)

.313

(.795)

"D"
"E"

“A”

Overall Flange

“B” ± .125 (.318)

Cutout Opening

18.03 (45.72)

Overall Flange

17.28 ± .125

(43.89 ± .318)

Cutout Opening

.375
(.952)
Above
Counter

.850

(2.16)

15.03

(38.2)

15.18

(38.56)

.536

(1.4)

Standard
Mounting
Clips

Standard
Positioning
Clips

Drop-in “A” “B” “C” “D” “E”

2 Well

45.42

(114.60)

44.67

(113.46)

44.35

(112.65)

11.75

(29.85)

11.25

(28.58)

3 Well

66.84

(169.77)

66.09

(167.87)

65.77

(167.06)

15.50

(39.37)

15.00
(38.1)

4 Well

88.57

(224.97)

87.52

(222.30)

87.19

(221.46)

19.25

(48.90)

18.75

(47.63)

“C"

4

(10.16)

Note: Distance from

countertop to bottom of

optional manifold is

21½" (54.61 cm)

6-20R

208 & 240V

5-20R

120V

6-15R

208 & 240V

6-30R

208 & 240V

5-30R

120V

5-15R

120V

AUTO-FILL OPTION

Field-installed option that efficiently maintains a constant water level. Eliminates the need to monitor wells and add water, reducing operating and
labor costs. Attaches easily to manifold drain assembly using simple tools. The check valve/siphon prevents cross contamination of drain and
potable water lines.

DIMENSIONS

Short Side Hot Drop-insThe Vollrath Company, L.L.C.

RECEPTACLES

©

2009 The Vollrath Company L.L.C Form Number L35706 Rev. 3/09

Printed in USA