Page 1
Project:
www.vollrathco.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
Main Fax: 800.752.5620 or 920.459.6573
Technical Services: 800.628.0832
Technical Services Fax: 920.459.5462
Agency Listings
Note: Product has not been performance
tested for potentially hazardous foods.
Item Number:
Quantity:
STANDARD REFRIGERATED COLD PAN DROP-INS
MODELS
36490 One Pan 36444 Four Pan
36441 Two Pan 36446 Five Pan
36442 Three Pan 36448 Six Pan
FEATURES
❑ Top is 18-gauge stainless steel, 18-8 Type 304, with
3/8" (9.52 mm) overhang on all sides and die stamped with fullperimeter drip edge. Molded breaker gasket is fitted under the
drip edge.
❑ Flat work surface around opening.
❑ Seamless well is 18-gauge 18-8 stainless Type 304.
❑ 1" (2.5 cm) integral drain is standard.
❑ Inner well assembly insulated with foamed in place
polyurethane foam insulation.
Standard Refrigerated Cold Pan Drop-in
DESCRIPTION
The modular drop-in standard (non-NSF7) refrigerated cold pans
are designed for top-mount installation.
A full-perimeter drip edge contains spills and condensation within
the stainless steel countertop area of the drop-in.
High-density polyurethane foam insulation surrounds the exterior
of the well to provide most efficient performance with energy
savings.
The deep display well is designed to accommodate standard
12" x 20" (30.5 x 50.8 cm) pans.
Refrigeration coils surround the exterior side walls of well for
maximum cooling. Refrigerant is R134A to meet federal
standards.
Cold drop-ins are best used for holding periods up to 4 hours. For
best performance, stainless steel containers are recommended.
Note: Modular drop-ins cannot be cancelled or returned.
❑ Condensing unit suspended below well.
❑ Temperature control on compressor.
❑ For complete air circulation, two openings in the cabinet are
required.
❑ Exterior housing is 18-gauge galvanized steel.
❑ Optional perforated false bottom is nominal 1" (2.5 cm) high
and constructed of 18-gauge Type 304 stainless steel. False
bottom will reduce pan depth by same dimension.
False bottom options:
Drop-In Model False Bottom Model
36490 20000
36441 36913
36442 36914
36444 36915
36446 36916
36448 36917
❑ Unit comes with ________cord and plug and does not require
hard wiring.
❑ On/Off switch is mounted on side of compressor housing.
❑ Positioning clips provided to center drop-in within cutout.
❑ One-year parts and labor warranty. Additional four years
on compressor.
Standard Refrigerated Cold Pan Drop-ins
The Vollrath Company, L.L.C.
Due to continued product improvement, please consult
www.vollrathco.com for current product specifications.
WARRANTY: All models shown come with Vollrath’s standard
warranty against defects in materials and workmanship. For full
warranty details, please refer to the Vollrath Equipment and
Smallwares Catalog.
Approvals Date
Page 2
STANDARD REFRIGERATED COLD PAN DROP-INS
www.vollrathco.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
Main Fax: 800.752.5620 or 920.459.6573
Technical Services: 800.628.0832
Technical Services Fax: 920.459.5462
NOTE: For the One Pan Drop-in, the control switch is located on
the side of the housing and not on the front as shown.
Also, the drain is located within the housing.
Front View
Side View
To p V i ew
19
(48.3)
¾ (1.9)
Minimum space
required TYP
(Closed ends)
23½
(59.7)
26
(66)
19
(48.3)
3 (7.6)
Minimum
space
required
(Open end)
3 (7.6)
Minimum
space
required
(Open end)
³⁄₈ (1)
Rise above
countertop
19⁷⁄₈
(50.5)
B
8
(20.3)
A
Air
Flow
5-15R
120V
MODELS
36490 One Pan 36444 Four Pan
36441 Two Pan 36446 Five Pan
36442 Three Pan 36448 Six Pan
DIMENSIONS
❑ Opening cutout must have a 7/8" (2.2 cm) corner radius.
❑ Dimensions shown in inches (cm)
SPECIFICATIONS
Standard Refrigerated Cold Pan Drop-ins
Item
The Vollrath Company, L.L.C.
36490
36441
36442
36444
36446
36448
(A)
Overall
Length
15
(38.1)12(30.4)
29
(73.7)
41½
(105.4)
54¾
(139.1)
68
(172.7)63(160)
81¼
(206.4)
Inside
Length
(62.9)
(95.3)
(127.6)54(137.2)
(192.4)
24¾
37½
50¼
75¾
B
Cutout
Length
14¼
(36.2)
28¼
(71.8)
40¾
(103.5)
67¼
(170.8)
80½
(204.5)
Cutout
Width
25¼
(64.1)
25¼
(64.1)
25¼
(64.1)
25¼
(64.1)
25¼
(64.1)
25¼
(64.1)
Compressor Voltage Amps Plug
1/5 HP 120 3.8 5-15P
1/5 HP 120 3.8 5-15P
1/5 HP 120 3.8 5-15P
1/4 HP 120 4.9 5-15P
1/4 HP 120 4.9 5-15P
1/3 HP 120 7.2 5-15P
©
2012 The Vollrath Company L.L.C. Form Number L35512 3/12
Receptacles
Printed in USA
Loading...