Page 1
Project:
www.vollrathco.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
Main Fax: 800.752.5620 or 920.459.6573
Technical Services: 800.628.0832
Technical Services Fax: 920.459.5462
Agency Certifications
Item Number:
Quantity:
MODULAR DROP-IN: NSF7 REFRIGERATED COLD PANS
MODELS
36456 One Pan
36429 Two Pan
36430 Three Pan
36434 Four Pan
36436 Five Pan
36438 Six Pan
FEATURES
❑ Top is 18-gauge stainless steel, 18-8 Type 304, with ³⁄₈"
(9.52 mm) overhang on all sides and die stamped with
full-perimeter drip edge. Molded breaker gasket fitted
Modular Drop-In: NSF7 Refrigerated Cold Pans
DESCRIPTION
The modular drop-in NSF7 refrigerated cold pans are
designed for top-mount installation.
A full-perimeter drip edge contains spills and condensation
within the stainless steel countertop area of the drop-in.
High-density polyurethane foam insulation surrounds the
exterior of the well to provide most efficient performance with
energy savings.
A 3" (7.6 cm) recess lowers the food pan below the work
surface to minimize the impact of ambient air. The deep
display well is designed to accommodate standard 12" x 20"
(30.4 cm x 50.8 cm) pans up to 6" (15.2 cm) deep.
Refrigeration coils surround the exterior side walls of well for
maximum cooling. Refrigerant is R134A to meet federal
standards.
Cold drop-ins are best used for holding periods up to four
hours. For best performance, stainless steel containers are
recommended.
Modular drop-in orders cannot be canceled or returned.
under drip edge.
❑ Flat work surface around opening.
❑ Seamless well is 18-gauge 18-8 stainless Type 304, 6⁵⁄₈"
(16.8 cm) deep.
❑ 1" (2.5 cm) integral drain is standard.
❑ Refrigeration coils surround exterior side walls of well.
❑ Inner well assembly insulated with foamed in place
polyurethane foam insulation.
❑ Condensing unit suspended below well.
❑ Temperature control on compressor.
❑ For complete air circulation, two openings in the cabinet are
required. Louver cutout size is 8" x 10" (20.3 cm x 25.4 cm).
❑ Exterior housing is 18-gauge galvanized steel.
❑ Optional perforated false bottom is nominal
1" (2.5 cm) high and constructed of 18-gauge Type 304
stainless steel. False bottom will reduce pan depth by
same dimension. False bottom options:
Drop-In Model False Bottom Model
36456 70100
36429 36913
36430 36914
36434 36915
36436 36916
36438 36917
❑ Unit comes with cord and plug and does not require hard
wiring.
❑ On/Off switch is mounted on side of compressor housing.
❑ Positioning clips provided to center drop-in within cutout.
❑ One year parts and labor warranty. Additional four years
on compressor.
WARRANTY: All models shown come with Vollrath’s standard
warranty against defects in materials and workmanship. For full
warranty details, please refer to the Vollrath Equipment and
Smallwares Catalog.
Modular Drop-in: NSF7 Refrigerated Cold Pans
The Vollrath Company, L.L.C.
Due to continued product improvement, please consult
www.vollrathco.com for current product specifications.
Approvals Date
Page 2
MODULAR DROP-IN: NSF7 REFRIGERATED COLD PANS
www.vollrathco.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
Main Fax: 800.752.5620 or 920.459.6573
Technical Services: 800.628.0832
Technical Services Fax: 920.459.5462
To p V i ew
Front View
Side View
A
B
³⁄₈ (1)
Rise above
countertop
26 (66)
Overall Flange
25¼ (66.1)
Cutout Opening
23½
(59.7)
19⁷⁄₈
(50.5)
¾ (1.9)
Minimum
Space
Required
19
(48.3)
19
(48.1)
¾ (1.9)
Minimum
Space
Required
6⁵⁄₈
(16.8)
Air
Flow
5-15R
120V
120V
6-20R
MODELS
36456 One Pan 36434 Four Pan
36429 Two Pan 36436 Five Pan
36430 Three Pan 36438 Six Pan
DIMENSIONS
❑ NOTE: Opening cutout must have a 7/8" (2.2 cm) corner radius.
❑ Dimensions shown in inches (cm)
Modular Drop-in: NSF7 Refrigerated Cold Pans
The Vollrath Company, L.L.C.
SPECIFICATIONS
Item
36456 18 (45.7) 12 (30.5) 17¼ (43.8) 25¼ (64.1) 1/4 HP 120 3.8 5-15P
36429 29 (73.6) 24¾ (62.9) 28¼ (71.8) 25¼ (64.1) 1/4 HP 120 4.9 5-15P
36430 41½ (105.4) 37½ (95.3) 40¾ (103.5) 25¼ (64.1) 1/4 HP 120 4.9 5-15P
36434 54¾ (139.1) 50¼ (127.6) 54 (137.2) 25¼ (64.1) 1/3 HP 120 7.2 5-15P
36436 68 (172.7) 63 (160) 67¼ (170.8) 25¼ (64.1) 1/2 HP 120 11 5-20P
36438 81¼ (206.4) 75¾ (192.4) 80½ (204.5) 25¼ (64.1) 1/2 HP 120 11 5-20P
(A)
Overall
Length
Display
Length
(B)
Cutout
Length Width
Compressor Voltage Amps Plug
Receptacles
©
2011 The Vollrath Company L.L.C. Form Number L35513 10/11
Printed in USA
Loading...