MODULAR DROP-IN: FOUR WELL HOT
www.vollrathco.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
Main Fax: 800.752.5620 or 920.459.6573
Technical Services: 800.628.0832
Technical Services Fax: 920.459.5462
Agency Listings
MODELS
Modular Drop-In: Four Well Hot
DESCRIPTION
The modular drop-in is designed for top-mount installation and
does not require hard-wiring. The drop-in comes complete
with a 6-ft. (182.8 cm) power cord with plug and a 4-ft.
(121.9 cm) control cord for remote installation.
Full-perimeter drip-edge contains spills and condensation
within the stainless steel countertop area of the drop-in.
Drip-edge adds additional strength to the flange area.
Drop-in can operate wet or dry, however, moist operation is
recommended for even heating of the food product. It meets
NSF4 performance standards when using moist heat.
High-density glass-fiber insulation allows zero-clearance
installation and use of 625W elements for lower energy
consumption and reduced costs. Also available with 1000W
elements.
Stainless steel wells are 6³⁄₈" (16.2 cm) deep to allow use of
full-size and fractional pans up to 6" (15.2 cm) deep while still
providing moist heat. Adaptor bars are recommended when
using fractional pans.
WARRANTY: All models shown come with Vollrath’s standard
warranty against defects in materials and workmanship. For full
warranty details, please refer to the Vollrath Equipment and
Smallwares Catalog.
FEATURES
❑ Top is 18-gauge stainless steel, with ³⁄₈" (9.5 mm) overhang
❑ Breaker gasket included for installation under drip-edge.
❑ Flat work surface around opening.
❑ Deep drawn well is 20-gauge stainless steel, 6³⁄₈" (16.2 cm)
❑ Standard 1000W or 625W heating element.
❑ Infinite or thermostatic control.
❑ Power indicator light.
❑ Standard drain is ½" (1.3 cm) stainless steel fitting welded to
❑ Manifold drain option is 1" (2.5 cm) copper tubing and
❑ Unit insulated on sides, between wells, and below element
❑ Exterior housing is 20-gauge galvanized steel.
❑ Drop-in is supplied with stainless steel control panel
❑ Control panel may remain on unit or be remote mounted.
❑ Control wires contained in flexible rubber cord.
❑ Unit comes with cord and plug and does not require
❑ Positioning clips provided to center drop-in within cutout.
❑ Standard mounting clips adjustable for up to 3" (7.6 cm)
❑ Full one-year parts and labor warranty.
❑ Sheet pan adapter available. Item No. 19186.
Project:
Item Number:
Quantity:
1000W
Per Well
120V
Infinite
Control
120V
Thermostatic
Control
208V
Infinite
Control
208V
Thermostatic
Control
208-240V
Infinite
Control
208-240V
Thermostatic
Control
240V
Infinite
Control
240V
Thermostatic
Control
3640701 Standard –
3640751 Manifold –
3640761 Manifold Yes
3640711 Standard –
3640771 Manifold –
3640781 Manifold Yes
on all sides and die-stamped with full-perimeter drip-edge.
deep.
pan with ball valve shutoff below exterior housing.
retains individual well shut-off and adds manifold shutoff.
assembly with high-density glass fiber insulation.
connected to bottom of unit for shipping.
hard-wiring installation.
thick counters.
625W
Per Well Drain Auto-Fill
36406 Standard –
3640650 Manifold –
3640660 Manifold Yes
3640610 Standard –
3640670 Manifold –
3640680 Manifold Yes
36407 Standard –
3640750 Manifold –
3640760 Manifold Yes
3640710 Standard –
3640770 Manifold –
3640780 Manifold Yes
36474 Standard –
3647450 Manifold –
3647460 Manifold Yes
3647410 Standard –
3647470 Manifold –
3647480 Manifold Yes
Modular Drop-in: Four Well Hot
The Vollrath Company, L.L.C.
Due to continued product improvement, please consult
www.vollrathco.com for current product specifications.
Approvals Date
MODULAR DROP-IN: FOUR WELL HOT
www.vollrathco.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
Main Fax: 800.752.5620 or 920.459.6573
Technical Services: 800.628.0832
Technical Services Fax: 920.459.5462
26 (66)
Overall Flange
25¼ ± ¹⁄₈ (64.1)
Cutout Opening
15
(38.1)
³⁄₈ (.95)
Above
Counter
8½
½ MPT
Drain
Connection
23 (58.4)
23 (58.4)
21½
(54.5)
26 (66)
Overall Flange
25¼ ± ¹⁄₈ (64.1)
Cutout Opening
³⁄₈ (.95)
Above
Counter
½ MPT
Drain
Connection
(21.6)
8½
(21.6)
Dimensions shown in
inches (centimeters).
Standard Drain
Top V i ew
Front View
Side View
Side View
Manifold Drain
Optional
Auto-Fill
Option
54¾ (139.1)
20
(50.8
26
(60)
19⁷⁄₈
(50.5)
11⁷⁄₈
(30.2)
17
(43.2)
6
(15.2)
12 (30.5)
Front View
54¾ (139.1)
Overall Flange
54 ± ¹⁄₈ (137.2)
Cutout Opening
Standard
Mounting
Clips
Standard
Positioning
Clips
½
(1.3)
53¾ (136.5)
54¾ (139.1)
Overall Flange
54 ± ¹⁄₈ (137.2)
Cutout Opening
Standard
Mounting
Clips
Standard
Positioning
Clips
½
(1.3)
53¾ (136.5)
Control Panel Cutout
+.063/-0 (+.160/-0) Tolerance
3⁵⁄₁₆
(8.4)
1⁹⁄₁₆ (4)
Ø⁵⁄₁₆
19¼ (48.9)
18¾ (37.6)
Receptacles
6-15R
208 - 240V
6-30R
208 - 240V
5-30R
120V
AUTO-FILL OPTION
Field-installed option that efficiently maintains a constant water level. Eliminates the need to monitor wells and add water, reducing
operating and labor costs. Attaches easily to manifold drain assembly using simple tools. The check valve/siphon prevents cross
contamination of drain and potable water lines. NOTE: The auto-fill reservoir is approximately 6 x 17 (15.2 x 43.2) and requires
additional space in the cabinet.
DIMENSIONS
❑ Cutout Dimensions: 27½" x 25¼" (69.9 cm x 64.1 cm). Opening cutout must have a 7/8" (2.2 cm) corner radius.
Modular Drop-in: Four Well Hot
The Vollrath Company, L.L.C.
ELECTRICAL SPECIFICATIONS
Model
36406, 3640650, 3640660, 3640610, 3640670, 3640680 625 2500 120V AC 20.8 5-30P
36407, 3640750, 3640760, 3640710, 3640770, 3640780 625 2500 208V AC 12 6-15P
3640701, 3640751, 3640761, 3640711, 3640771, 3640781 1000 3000 - 4000 208 - 240V AC 14.4 - 16.7 6-30P
36474, 3647450, 3647460, 3647410, 3647470, 3647480 625 2500 240V AC 10.4 6-15P
Watts
Per Well
Total
Watts
©
Volts
Nominal
Amps
NEMA
Plug
2012 The Vollrath Company L.L.C. Form Number L35508 6/12
Printed in USA
Loading...