Vollrath 3640401 User Manual
MODULAR DROP-IN: THREE WELL HOT
www.vollrathco.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
Main Fax: 800.752.5620 or 920.459.6573
Technical Services: 800.628.0832
Technical Services Fax: 920.459.5462
Agency Listings
MODELS
Thermostatic
Thermostatic
208-240V
208-240V
Modular Drop-In: Three Well Hot
Thermostatic
DESCRIPTION
The modular drop-in is designed for top-mount installation and
does not require hard-wiring. The drop-in comes complete
with a 6-ft. (182.8 cm) power cord with plug and a 4-ft.
(121.9 cm) control cord for remote installation.
Full-perimeter drip-edge contains spills and condensation
within the stainless steel countertop area of the drop-in.
Drip-edge adds additional strength to the flange area.
Drop-in can operate wet or dry, however, moist operation is
recommended for even heating of the food product. It meets
NSF4 performance standards when using moist heat.
High-density glass-fiber insulation allows zero-clearance
installation and use of 625W elements for lower energy
consumption and reduced costs. Also available with 1000W
elements.
Stainless steel wells are 6³⁄₈" (16.2 cm) deep to allow use of
full-size and fractional pans up to 6" (15.2 cm) deep while still
providing moist heat. Adaptor bars are recommended when
using fractional pans.
WARRANTY: All models shown come with Vollrath’s standard
warranty against defects in materials and workmanship. For full
warranty details, please refer to the Vollrath Equipment and
Smallwares Catalog.
Thermostatic
FEATURES
❑ Top is 18-gauge stainless steel, with ³⁄₈" (9.5 mm) overhang
on all sides and die-stamped with full-perimeter drip-edge.
❑ Breaker gasket included for installation under drip-edge.
❑ Flat work surface around opening.
❑ Deep drawn well is 20-gauge stainless steel, 6³⁄₈" (16.2 cm)
deep.
❑ Standard 1000W or 625W heating element.
❑ Infinite or thermostatic control.
❑ Power indicator light.
❑ Standard drain is ½" (1.3 cm) stainless steel fitting welded to
pan with ball valve shutoff below exterior housing.
❑ Manifold drain option is 1" (2.5 cm) copper tubing and
retains individual well shut-off and adds manifold shutoff.
❑ Unit insulated on sides, between wells, and below element
assembly with high-density glass fiber insulation.
❑ Exterior housing is 20-gauge galvanized steel.
❑ Drop-in is supplied with stainless steel control panel
connected to bottom of unit for shipping.
❑ Control panel may remain on unit or be remote mounted.
❑ Control wires contained in flexible rubber cord.
❑ Unit comes with cord and plug and does not require
hard-wiring installation.
❑ Positioning clips provided to center drop-in within cutout.
❑ Standard mounting clips adjustable for up to 3" (7.6 cm)
thick counters.
❑ Full one-year parts and labor warranty.
❑ Sheet pan adapter available. Item No. 19186.
120V
Infinite
Control
120V
Control
208V
Infinite
Control
208V
Control
Infinite
Control
Control
240V
Infinite
Control
240V
Control
Project:
Item Number:
Quantity:
1000W
Per Well
3640401 36404 Standard –
3640451 3640450 Manifold –
3640461 3640460 Manifold Yes
3640411 3640410 Standard –
3640471 3640470 Manifold –
3640481 3640480 Manifold Yes
3640501 Standard –
3640551 Manifold –
3640561 Manifold Yes
3640511 Standard –
3640571 Manifold –
3640581 Manifold Yes
625W
Per Well Drain Auto-Fill
36405 Standard –
3640550 Manifold –
3640560 Manifold Yes
3640510 Standard –
3640570 Manifold –
3640580 Manifold Yes
36473 Standard –
3647350 Manifold –
3647360 Manifold Yes
3647310 Standard –
3647370 Manifold –
3647380 Manifold Yes
Modular Drop-in: Three Well Hot
The Vollrath Company, L.L.C.
Due to continued product improvement, please consult
www.vollrathco.com for current product specifications.
Approvals Date
MODULAR DROP-IN: THREE WELL HOT
www.vollrathco.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
Main Fax: 800.752.5620 or 920.459.6573
Technical Services: 800.628.0832
Technical Services Fax: 920.459.5462
Control Panel Cutout
+.063/-0 (+.160/-0) Tolerance
3⁵⁄₁₆
(8.4)
1⁹⁄₁₆ (4)
Ø⁵⁄₁₆
Dimensions shown in
inches (centimeters).
Standard Drain
Top V i ew
Side View
Front View
Side View
15½ (39.4)
15 (38.1)
26 (66)
Overall Flange
25¼ ± ¹⁄₈ (64.1)
Cutout Opening
15
(38.1)
³⁄₈ (.95)
Above
Counter
8½
½ MPT
Drain
Connection
23 (58.4)
23 (58.4)
21½
(54.5)
26 (66)
Overall Flange
25¼ ± ¹⁄₈ (64.1)
Cutout Opening
³⁄₈ (.95)
Above
Counter
½ MPT
Drain
Connection
(21.6)
8½
(21.6)
Front View
Optional
Auto-Fill
Option
Manifold Drain
41½ (105.4)
20
(50.8)
26
(60)
19⁷⁄₈
(50.5)
11⁷⁄₈
(30.2)
17
(43.2)
6
(15.2)
12 (30.5)
41½ (105.4)
Overall Flange
40¾ ± ¹⁄₈ (103.5)
Cutout Opening
Standard
Mounting
Clips
Standard
Positioning
Clips
½
(1.3)
40½ (102.9)
40½ (102.9)
41½ (105.4)
Overall Flange
40¾ ± ¹⁄₈ (103.5)
Cutout Opening
Standard
Mounting
Clips
Standard
Positioning
Clips
½
(1.3)
Receptacles
6-20R
208 - 240V
5-20R
120V
6-15R
208 - 240V
5-50R
120V
AUTO-FILL OPTION
Field-installed option that efficiently maintains a constant water level. Eliminates the need to monitor wells and add water, reducing
operating and labor costs. Attaches easily to manifold drain assembly using simple tools. The check valve/siphon prevents cross
contamination of drain and potable water lines. NOTE: The auto-fill reservoir is approximately 6 x 17 (15.2 x 43.2) and requires
additional space in the cabinet.
DIMENSIONS
❑ Cutout Dimensions: 27½" x 25¼" (69.9 cm x 64.1 cm). Opening cutout must have a 7/8" (2.2 cm) corner radius.
Modular Drop-in: Three Well Hot
The Vollrath Company, L.L.C.
ELECTRICAL SPECIFICATIONS
Model
36404, 3640450, 3640460, 3640410, 3640470, 3640480 625 1875 120V AC 15.6 5-20P
3640401, 3640451, 3640461, 3640411, 3640471, 3640481 1000 3000 120V AC 25 5-50P
36405, 3640550, 3640560, 3640510, 3640570, 3640580 625 1875 208V AC 9 6-15P
3640501, 3640551, 3640561, 3640511, 3640571, 3640581 1000 2250 - 3000 208 - 240V AC 10.8 - 12.5 6-20P
36473, 3647350, 3647360, 3647310, 3647370, 3647380 625 1875 240V AC 7.8 6-15P
Watts
Per Well
Total
Watts
©
2012 The Vollrath Company L.L.C. Form Number L35507 6/12
Volts
Nominal
Amps
NEMA
Plug
Printed in USA
Loading...