Volanti Displays VD-6500-0B09-11V2 Quick Start Manual

Installation:

• Review this quick-start guide and familiarize
yourself with the monitor.

• Remove the box lid, add brackets, then continue
to unpack & mount the monitor on wall or cart.

• Connect video signal & USB touch cables to PC
or other appropriate input source.

• Connect power supply to the monitor then plug

into AC mains as nal step.

Note: The monitor default is to power on when
an active video source is connected. This can be

changed through the OSD menu.

Monitor Information

Quick Start - Front

65” F-line 10point Touch - P/N: VD-6500-0B09-11V2

• Volanti Display 65” F-line multi-touch 4K
resolution monitor. See Input note below.

• Windows 10-point multi-touch, HID compatible
so just plug & play, no additional drivers or
software required if using Windows 8 or 10.

• Apple OS-X, single-point touch, plug & play. For
multi-touch 3rd party driver required.

• Input: Use 4K, Ultra-HD (3840x2160) @60Hz for
optimal image quality. Lower resolution input will

be scaled to ll the display. The aspect ratiop of

the display is 16:9, other aspect ratios may result
in black bars on the sides, for example a 4:3
image source will result in black bars left & right.

Maintenance: Ensure inside edges of the bezel are
not obstructed.

In the Box

The Volanti 65” F-line touch monitors comes with:

• Volanti 65” F-line touch monitor.

• Remote control (with batteries).

• Power supply and power cord.

• HDMI cable

• USB cable

www.volantidisplays.com

Quick Start - Back

65” F-line 10point Touch - P/N: VD-6500-0B09-11V2

OSD Menu Buttons

On/O

Down

Up

(not used)

Menu

- (decrease)

+ (increase)

Removable

handle

Connectors

shown below

Power LED

IR receiver

OSD menu

buttons

Removable

handle

Removable
handle

VESA 400mm x 400mm
M6 mounting screws

Removable
handle

Power

DC input

Serial

DB9

USB - Touch

Type B

Ethernet

RJ45

DVI-I (dual link)

supports VGA

HDMI x 3

4K @60/30/30Hz

Displayport

Accessory Mounting Holes: On each side
there are two threaded mounting holes,
these are for mounting accessories such as a
camera for web conferencing or a soundbar.
Screw size M5, max depth 5mm.

Removable Access Plates: There are a
number of access plates on the enclosure.

These are for qualied service technicians

only and must not be removed.

© 2018 Volanti Displays v1.0 Nov 2018