Volanti Displays 32-4KT, VD-3150-0Q Series Quick Start Manual

Installation:

Quick Start - Front

32” PCAP 10-Point Touch - P/N: 32-4KT

• Review this quick-start guide and familiarize
yourself with the monitor.

• When unpacking, handle the monitor with
care making use of the carry handles. Remove
protective wrapping including from the display.

• Attach mounting brackets as appropriate and
mount before connecting cables.

• Connect video signal & USB touch cables to PC
or other appropriate input source.

• The monitor will auto-seek to any connected
video input. If multiple input sources are
connected they can be selected using the
buttons for the menu, or use the remote or any
connected room controller.

• Connect power supply to the monitor then plug

into AC mains as nal step.

Note: The monitor default is to power on when
power is attached, it will then stay on if an active
video source is connected. If video is disconnected

it will auto power O. This can be changed through

the OSD menu.

Monitor Information

29”

31.5” viewing

17”

• Volanti Display 32” PCAP multi-touch 4K
resolution monitor. See Input note below.

• Windows 10-point multi-touch, HID compatible
so just plug & play, no additional drivers or
software required if using Windows 8 or 10.

• Input: Use Ultra-HD (3840x2160) @60Hz for
optimal image quality. Lower resolution input will

be scaled to ll the display. The aspect ratio of

the display is 16:9, other aspect ratios may result
in black bars on the sides, for example a 4:3
image source will result in black bars left & right.

In the Box

The Volanti 32” PCAP touch monitor comes with:

• Volanti 32” PCAP touch monitor.

• Remote control (with batteries).

• Power supply and power cord.

• HDMI cable

• USB cable

www.volantidisplays.com

Menu Buttons

LED power &
IR receiver

Quick Start - Back

32” PCAP 10-Point Touch - P/N: 32-4KT

On/O

Up

Down

Menu

- (decrease)

+ (increase)

USB - Touch

Type B

Connectors

shown below

Handle

(removable)

DVI-I

(dual link)

Displayport

1.2

VESA 300mm x 300mm

M6 mounting screws

CAUTION: M6 screws

must not extend more than

25mm into the housing

Power LED
IR receiver

Menu
buttons

Handle

(removable)

Power
supply &
bracket

(removable)

Dimensions:

• Width: 29”

• Height: 17”

• Active viewing area: 31.5” diagonal

Serviceability: The monitor should only be
serviced by Volanti or authorized agents. It is
not designed to be user serviceable.

Serial

DB9

Ethernet

RJ45

HDMI x 3

4K @60/30/30Hz

Power

DC Input

© 2019 Volanti Displays 10 Feb 2019