Volant RPC1-10.25 User Manual

Radial Piston Crimping Tool (RPC1-10.25)

Radial Piston Crimping Tool (RPC)

Volant’s RPC is a hydraulically-driven, load-controlled crimping tool used to apply radial load in crimping

and swaging applications. The RPC is portable and built for eld applications. The patented split-housing

architecture makes it possible to easily position the crimper anywhere along sections of pipe. With a full one
inch of diametric stroke, the interchangeable crimp jaws accommodate special geometry requirements and
allow variable curvatures and lengths.

Tool Model: RPC1-10.25

Specication Summary

Base Tool Characteristics

Maximum Working Pressure psi 10,000

Working Crimp Force lbs 1,100,000

Number of Pistons 8

Diametrical Clearance in 10.3

Diametrical Stroke in 1.05

Length of Dies in 5.15

Tool Height without Frame in 21.0

Tool Height with Frame in 29.0

Base Tool Weight lbs 510

Crimp Jaw Diametrical Die Max. Crimp Tool Weight

Part No.1 Curvature Clearance

(in) (in)

82443 7.05 7.89 565

82444 9.13 9.86 535

1 Current crimp jaws shown. Custom crimp jaws are available upon request.

(lbs)

Give us a problem. Or just drop us a line if you want to know more.

+1 866.8VOLANT / +1 866.886.5268 +1 780.784.7099 [e-mail] volantproducts.ca

Document No. 20035 / Revision B Printed in Canada JULY 2013

RPC1-10.25 | PAGE 1