VoIPon AT-530 User Manual

AT-530 User Manual

1/50

AT-530 User Manual

1 AT-530 Features........................................................................................................ 3

1.1 Appearance.......................................................................................................................3

1.2 Interface.............................................................................................................................3

1.3 Electricity characte ristic...................................................................................................3

1.4 Software.............................................................................................................................3

1.5 Standard and Protocols...................................................................................................4

1.6 Compliant Standard..........................................................................................................4

1.7 Operating requirement.....................................................................................................4

1.8 Package.............................................................................................................................4

1.9 Installation..........................................................................................................................5

2 Web Configuration ....................................................................................................6

2.1 Access Web setting page................................................................................................6

2.2 Current state......................................................................................................................7

2.3 Network..............................................................................................................................8

2.3.1 Wan Config...............................................................................................8

2.3.2 LAN Config............................................................... ............................... 10

2.4 VoIP ..................................................................................................................................11

2.4.1 SIP Config................................................................................................11

2.4.2 Iax2 Config............................................................................................... 12

2.5 Advance...........................................................................................................................13

2.5.1 DHCP Server .......................................................................................... 13

2.5.2 NAT......................................................................................................... 14

2.5.3 Net Service ............................................................................................. 15

2.5.4 Firewall settings ...................................................................................... 16

2.5.5 QoS settings ........................................................................................... 17

2.5.6 Advance SIP s e ttings .............................................................................. 18

2.5.7 Call Service Settings............................................................................... 21

2.5.8 MMI Filter................................................................................................22

2.5.9 Audio Settings.........................................................................................23

2.6

Dial-Peer Settings ..........................................................................................................24

2.7 Config Manage................................................................................................................ 25

2.8 Update..............................................................................................................................26

2.9 System Manage..............................................................................................................28

2.9.1 Account Manage .....................................................................................28

2.9.2 Phone Book: ...........................................................................................28

2.9.3 Syslog Config:.........................................................................................28

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

AT-530 User Manual

2/50

2.9.4 Time Set:.................................................................................................29

2.9.5 Reboot: ...................................................................................................29

3 Use keypad configure AT-530 IP phone..............................................................30

3.1 Keypad function..............................................................................................................30

3.2 Keypad Menu..................................................................................................................31

4 Telnet Console......................................................................................................... 33

4.1 Introduce..........................................................................................................................33

4.2 Global Command............................................................................................................34

5 Tree Structure.......................................................................................................... 35

6 Network Diagnosis..................................................................................................44

7 Restore to factory default.......................................................................................44

8 POST Mode(safe mode)........................................................................................ 45

9 FAQ............................................................................................................................46

9.1 How many servers may AT-530 register simultaneously?........................................46

9.2 Why the settings vanish after reboot?.........................................................................46

9.3 How to use the dial r ule?...............................................................................................46

9.4 How to use speed dial function?..................................................................................47

9.5 How to conf igure digital map?......................................................................................47

9.6 How to use Call Forward, Call Transfer and 3-way Conference calls?..................47

9.7 How to use the reco rd function?..................................................................................49

9.8 How to use set the IP type via keypad?......................................................................50

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

AT-530 User Manual

3/50

1 AT-530 Features

1.1 Appearance

1.2 Interface

Power: Output Power:12VDC,500mA.
WAN:

RJ45 port.

LAN:

RJ45 port.

1.3 Electricity characteristic

z Speciality of electric: output the 12V 500mA DC
z The network connects:2 RJ45 connect, a WA N, a LAN

1.4 Software

z Support two sip accounts at the same time.
z Redundancies server support.
z NAT, Firewall.
z DHCP client and server.
z Support PPPoE, (used for ADSL, cable modem connecting).
z Support major G7.xxx CODEC.
z VAD,CNG.

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

AT-530 User Manual

4/50

z G.168 compliant 32ms echo cancell ation
z T o n e generation and Local DTMF re-generation according wit h ITU-T
z E.164 dial plan and customized dial rules
z Hotline.
z Speed Dial
z Call Forward, Call Transfer, 3-way conference calls
z Record
z Caller ID display
z DND(Do Not Disturb),Black List,Limit List
z Upgrade firmware through FTP, TFTP or HTTP,.
z Web management.
z Telnet remote management.
z adjustable user password and super password

1.5 Standard and Protocols

z IEEE 802.3 /802.3 u 10 Base T / 100Base TX
z PPPoE: PPP Protocol over Ethernet
z DHCP Client and Server: Dynamic Host Configuration Protocol
z G.711 u/a; G729, G7231 5.3/6.3 audio Codec
z SIP RFC3261, RFC 2543
z IAX2
z TCP/IP: Internet transfer and control protocol
z RTP: Real-time Transport P rotocol
z RTCP: Real-time Control Protocol
z VAD/CNG save bandwidth
z Telnet: Internet's remote login protocol
z DNS: Domain Name Server
z TFTP: Trivial File Transfer Protocol
z HTTP: Hyper Text Transfer protocol
z FTP: File Transfer protocol

1.6 Compliant Standard

z CE：EN55024,EN55022
z FCC part15
z RoHS

1.7 Operating requirement

z Operation temperature: 0 to 40° C (32° to 104° F)
z Storage temperature: -30° to 65° C (-22° to 149° F)
z Humidity: 10 to 90% no dew

1.8 Package

z Size: 338×220×85mm
z Packing List

9 AT-530 IP phone
9 Power adaptor (out put 12v ,500mA)
9 Manual CD

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

AT-530 User Manual

5/50

1.9 Installation

Use ethernet cable to connect AT-530’s LAN port and your computer. Set your computer’s ip
to the network 192.168.10.x or using dynamic obtain IP. Open your web browser and key in

192.168.10.1. Then you will see the logon page of AT-530, the default username and
password is admin/admin for administrator and guest/guest for guest.

Set up page for VoIP use only:

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

AT-530 User Manual

6/50

2 Web Configuration

2.1 Access Web setting page

Enter AT-530 IP address in the web browser and press ENTER to go to the log on page, and
key in the username and password to access AT-530 setting page.
Default username and password is:

Administrator: Username: admin password: admin
User: Username: guest Username: guest

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

AT-530 User Manual

7/50

2.2 Current state

This page shows AT-530’s running state.

Network shows the WAN and LAN port connecting state and current settings.
VoIP part show the working state of VoIP, you ca n see whether AT-530 has registered the

public sip server
Phone Number public sip and private sip phone numbers.

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

AT-530 User Manual

8/50

2.3 Network

2.3.1 Wan Config

WAN port network setting page.
Support static IP, dynamic obtain IP and PPPoE.
¾ Configure Static IP:

----Enable Static;

----Set AT-530’s IP address in the IP Address;

----Set netmask in the Netmask field;

----Set router IP address in the Gateway;

----DNS Domain:

----Set local DNS server in the Preferred DNS and the Alternate DNS

¾ Configure to dynamic obtain IP

----Enable DHCP;
If there is DHCP server in your local network, AT-530 will automatically obtain WAN port
network information from your DHCP serv er.

¾ Configure PPPoE:

----Enable PPPoE

----PPPoE server: Enter “ANY” if no specified from your ITSP.

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

AT-530 User Manual

9/50

----Enter PPPoE username and pin in the username and password.
AT-530 will automatically obtain WAN port network information from your ITSP if PPPoE
setting and the setup are correct.

Notice: If user accesses the IP phone through WAN port. He/She should use the new IP
address to access the IP phone when the WAN port address was changed.

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

AT-530 User Manual

10/50

2.3.2 LAN Config

Bridge Mode: Enable this option to switch to bridge mode. IP phone won’t assign IP for its

LAN port in bridge mode and its LAN and WAN port will be in the same network. (This setting
won’t take effect unless you save the config and reboot the device)

IP Netmask: Set the IP and Netmask for the LAN
DHCP Server: Enable DHCP service in LAN port
NA T: Enable NAT.
Highest Priority of Voice Quality: Enable this option to guarantee voice quality. If there is

high flux in the LAN port, AT-530 will limit the stream rate.

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

AT-530 User Manual

11/50

2.4 VoIP

2.4.1 SIP Config

Setting page of public SIP server:

Register Server Addr: Register address of public SIP server
Register Server Port: Register port of public SIP server，default port is 5060
Register Username: Username of your SIP account (Always the same as the phone

number)

Register P a ssword: Password of your SIP account.
Proxy Server Addr: IP address of proxy SIP serv er (SIP provider always use the same

IP for register server and proxy server, in this case you don’t need to configure the proxy
server information. )

Proxy Server Port: Signal port of SIP proxy
Proxy Username: proxy server username
Proxy Password: proxy server password
Domain Realm: SIP domain, enter the sip domain if any, otherwise AT-530 will use

the proxy server address as sip domain.

Local SIP port: Local SIP register port, default 5060
Phone Number: Phone number of your SIP account
Register Expire Time: register expire time, default is 600 seconds. AT-530 will auto

configure this expire time to the server recommended setting if it is different from the SIP
server.
Detect Interval Time: Co-work with the Auto Detec t Serve r, if Auto De tect Serv er is enable,
AT-530 will periodically detect if the SIP server is available according this setting.
User Agent:
Encrypt Key: The particular service system decrypts of the key , matching with the server
Type usage, the key provide by the particular service system supplier, default is empty
Server Type：The particular service system supplier carries out the sign and speeches to

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

AT-530 User Manual

12/50

encrypt, default is common
DTMF Mode: DTMF signal sending mode: support RFC2833, DTMF_RELAY (inband audio)
and SIP info
RFC Protocol Edition: Current AT-530 SIP version. Set to RFC 2543 if the gate need to
communicate to devices (such as CISCO5300) using the SIP 1.0. Default is RFC 3261.
Enable Register: Enable/Disable SIP register. AT-530 won’t sent register info to SIP
server if disable register.

2.4.2 Iax2 Config

Setting page of public IAX server:

IAX Server Addr: Register address of public IAX server
IAX Server Port:

Register port of public IAX server，default port is 4569

Account Name:

Username of your SIP account (Always the same as the phone

number)

Account Password: Password of your IAX account.
Local port:

Signal port of local, default port is 4569

Phone Number: Phone number of your IAX account

Voice mail number: If the IAX support voice mail, but your username of the voice mail is
letters which you can not input with the ATA , then you use the number to stand for your
username

Voice mail text: if IAX support voice mail, config the domain name of your mail box here.
Echo test number: If the platform support echo test , and the number is test form , the config

the test number to replace the text format The echo test is to test the woring status of
terminals and platform

Echo test text: echo test number in text format
Refresh time: IAX refresh time
Enable Register: enable or disable register

IAX(Default Protocol): Set IAX 2 as the default protocol , if not the system will choose SIP as

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

AT-530 User Manual

13/50

default

Enable G.729:

Using G.729 speech coding mandatory consultations

2.5 Advance

2.5.1 DHCP Server

DHCP server manage page.
User may trace and modify DHCP server information in this page.

DNS Relay: enable DNS relay function.
User may use below setting to add a new lease table.

Lease Table Name: Lease table name.
Lease Time: DHCP server lease time.
Start IP: Start IP of lease table.
End IP: End IP of lease table. Network device connecting to the AT-530 LAN port can

dynamic obtain the IP in the range between start IP and end IP.

Netmask: Net m ask of lease table .
Gateway: Default gateway of lease table
DNS: default DNS server of lease table.

Notice: This setting won’t take effect unless you save the config and reboot the
device

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

AT-530 User Manual

14/50

2.5.2 NAT

Advance NAT setting. Maximum 10 items for TCP and UDP port mapping.

IPSec ALG: Enable/Disable IPSec ALG;
FTP ALG: Enable/Disable FTP ALG;
PPTP ALG: Enable/Disable PPTP ALG;

Tr an sfer T ype: Transfer type using port mapping.
Inside IP: LAN device IP for port mapping.
Inside Port: LAN device port for p ort mapping.
Outside Port: WAN port for port mapping.

Click Add to add new port mapping item and Delete to delete current port mapping item.

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

AT-530 User Manual

15/50

2.5.3 Net Service

HTTP Port: configure HTTP transfer port, default is 80.User may change this port to

enhance system’s security. When this port is changed, please use
http://xxx.xxx.xxx.xxx:xxxx/ to reconnect.

Telnet Port: configure telnet transfer port, default is 23.
RTP Initial Port : RTP initial port.
RTP Port Quantity: Maximum RTP port quantity, default is 200

Notice:
Settings in this page won’t take effect unless save and reboot the device.

If you need to change telnet port or HTTP port, please use the port greater than
1024, because ports under 1024 is system remain ports.

HTTP service if HTTP is set to 0.

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]