Vogue 15251 Assembly Instructions Manual
Stroller Model # 015251
IMPORTANT!
RETAIN FOR FUTURE REFERENCE
03
Due to variations in the style and design of our products, the photographs and illustrations
shown in this instruction manual are generic, therefore product fabrics, colour and
design may vary from images shown. CNP Brands reserves the right to alter product
specications without notice as a result of our ongoing policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Vogue Childcare Stroller
Congratulations on your purchase of the
Vogue Childcare Stroller
This product has been designed and developed with
safety, comfort and functionality in mind. Please take
the time to read this manual carefully before using
this product and keep it in a safe place for future
reference.
Fingers or parts of the body could be injured when the stroller is being folded or unfolded. Please
use caution when folding or unfolding the stroller.
Always check that safety locks are engaged before placing a child in the stroller.
Ensure your child is secured with a correctly adjusted safety harness.
Do not allow children to stand on the seat.
Do not hang bags or goods from the handle as this could cause the stroller to tip over.
Do not place more than 5kgs in the basket or 1kg in the hood pocket (if supplied).
The weight of the child using the product should not exceed 20kgs.
The height of the child using the product should not exceed 96cm.
It is unsafe to use parts other than those approved by the manufacturer.
Never ride with more than one child in the stroller.
This stroller has been designed for use on at or gently sloped surfaces. Using this stroller on
uneven or higher sloped surfaces may cause the stroller to become unstable and tip over.
Regularly inspect all parts and locking devices, promptly replace worn out or broken parts.
Remove the child from the stroller before going up or down stairs and escalators.
To prevent the risk of the stroller catching re, do not park it near an open re, heater or barbeque.
Do not make any changes or alterations to this product, unless through an approved service agent.
To avoid the risk of suffocation, keep all plastic packaging materials out of reach of children.
Never leave safety harness connected when not tted to a child in the stroller as this may create
loops that could cause a strangulation hazard.
Ensure the storage latch is fully engaged when lifting or carrying the stroller
Read all instructions before assembly and use of the stroller. Keep
instructions for future use.
Safety Precautions
WARNING
TO AVOID INJURY OR DEATH:
ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER
IS PARKED.
DO NOT LEAVE CHILDREN UNATTENDED.
SECURE THE CHILD IN THE HARNESS AT ALL TIMES.
DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS
STROLLER.
MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING
PARTS IF YOU ADJUST THE STROLLER.
TO AVOID INJURY ENSURE THAT YOUR CHILD IS KEPT
AWAY WHEN FOLDING AND UNFOLDING THE STROLLER.
ENSURE THAT ALL LOCKING DEVICES ARE ENGAGED
BEFORE USE.
USE THE TETHER STRAP TO STOP THE STROLLER
ROLLING AWAY.
DO NOT USE THIS BASSINET ONCE THE CHILD CAN SIT
UP UNAIDED.
BE AWARE THAT MOVING PARTS MAY CAUSE INJURY IF
CARE IS NOT TAKEN.
0504
Check what you have received...
You have received 1 box. Please check the contents of the box against the list below. If anything is
missing, please contact Customer Service. In Australia, contact CNP Brands on 1300 667 137, in
New Zealand contact Wainhouse Distribution on 0800 567 5000.
Assembly / Operating Instructions
Assembly Contents
Supplied loose in box:
Carry cot/seat unit
Frame
Back wheels (x2)
Front swivel wheels
(x2)
Boot cover
Canopy
Bumper
x 1
x 1
x 1
x 1
x 1
x 1
x1
Right car seat adapter
(marked on the inside with “R”)
Left car seat adapter
(marked on the inside with “L”)
0706
Front swivel wheels assembly
1. Line up the front wheels with the bottom of the frame.
2. Push rmly until the wheel clicks into place. Repeat with other
side. Ensure wheels are both clicked rmly into place.
Swivel function
1. To lock swivel wheels, push lever outwards.
2. To unlock swivel wheels, push lever inwards.
WARNING: On unmade or uneven surfaces all swivels must be
locked.
Removing the front wheels
1. Push in the quick release tab,
then pull the wheel out of the
wheel - housing.
Assembly / Operating Instructions
Assembly Contents
Removing the back wheels
1. Push in the quick release tab,
then pull the wheel out of the
wheel - housing.
Back wheel assembly
1. Line up the back wheel with the
hole and push in wheel until you
hear a ‘click’ to ensure it’s correctly
in place.
Loading...