Vogels PFT 8856 User Manual
PFT8856
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
9531-060-Z04-00
www.vogels.com
PFT8856
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
Included components
If this is a “one man” installation find a “friendly” clear flat
wall to place one leg assembly along side. Place the lower
pan panel on top of the legs channel between the “upright”.
Next place the second leg over the lower pan panel so all
four through holes line up and loosely secure the lower pan
to the legs with the four M8 x 1.25 x 60mm “button head Allen head screws and M8 flat washers supplied.
x2
M6 x 12mm
x4
M8 x 60mm
x4
M8 x 10mm
x1x4
14mmM16 x 35mm
x20 x20 x4
M8 M6 x 10mm M4 M4 M8
x2
M5 x 6mm
M8 x 60mm
5/32”
x4
Required for installation
3 421
1 2
x1
x4
M8
x4 x4
x1
2.5mm
x1
5mm
Laying the paired leg assembly first on its back and then on
its front securely install the four casters on the front and rear
of the leg assemblies using the M8 flat washers and M8 self
locking nuts supplied. Then securely install the four casters.
We recommend the two rear caster be the “locking pair”
5mm
9531-060-Z04-00
4x
4x
3x
www.vogels.com
13mm
16x
16x
PFT8856
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
Loosely install the front upper cover to the front of the cart
with the four M6 x 1.0 x 10mm”button head” Allen screws
supplied.
1
3
4mm
4x
2
4
3 4
4mm
4x
Repeat the same procedure with the upper rear panel to the
leg assembly with the four each “button head” Allen screws
supplied.
Now secure firmly the four lower pan “button head” screws
to the leg assembly and tighten firmly. Repeat the same process with the front and rear upper cover panels but “don’t”
over-tighten these.
Install the front “logo” plate to the lower panel cover with the
four each 10/32 x 1/2” “kep” nuts and flat washers supplied.
3
3
5 6
13mm
6
4
The rear oval panel cover can be installed before or after
final assembly of the cart with the four each M6 button head
Allen head screws supplied.
5mm
9531-060-Z04-00
www.vogels.com
Loading...