1-1202-US
Gear Pump Units
For single-line centralized lubrication systems
These units comprising the MFE Group are
designed to supply the lubricant used in intermittently operated, single-line centralized
lubrication systems.
The basic setup includes a gear pump unit
with motor, a 3- or 6-liter lubricant reservoir
– optionally of metal or plastic – or a 15-liter
metal reservoir and float switch to monitor
the minimum permissible level of lubricant.
In addition to the basic models it is also
possible for the units to be outfitted with
add-ons.
Special models for a wide variety of applications are listed in the overview table on
page 3.
MFE5-KW3-2 MFE5-KW6 MFE5-BW7
Gear pump units for single-line centralized lubrication systems
2 1-1202-US
312 45
345-4
001 003 006 010 016
1
003
312
343-4
003 006 010
1
003
1
003
B
? C
A
VTPa_d\_d]Xc
<54$1F&B%!
\TcTaX]Vd]Xc
PbbT\Q[h"!
_Xbc^]SXbcaXQdc^a
PbbT\Q[h"#
\TPbdaX]V
cTa\X]P[
\Pg_aTbbdaTbfXcRW
Va^d_3BF
\X]_aTbbdaTbfXcRW
Va^d_3BF
S^bPVTbX] RR\
Example of a single-line central lubrication system for automobile makers
The system consists essentially of:
a gear pump unit –
6-liter metal reservoir –
piston distributors, assembly 340 –
metering units, assembly 320 –
pressure switches, group DS-W –
for max. pressure build-up and relief pressure
Gear pump units for single-line centralized lubrication systems
31-1202-US
Overview table for gear pump units
Order No. Reservoir capacity Reservoir material Design features
[liters]
MFE5-KW3-2 3 Plastic Basic version with WS32-2 float switch
MFE5-KW3-2-S4 3 Plastic Basic version with WS35-2 float switch
MFE5-KW3-2-S9 3 Plastic For oil as 5 mm2/s at max. 16 bars
MFE5-KW3-S46 3 Plastic VW version
MFE5-KW3-2-S13 3 Plastic Unit for 50/95 weatherproofing (DIN 50015); WS32-2 float switch
MFE5-KW3-S24 3 Plastic Motor with HAN6ES Harting connector; WS35-S30 float switch
MFE5-BW3-2 3 Metal Basic version with WS32-2 float switch
MFE5-BW3-2-S14 3 Metal French Automotiv version (CNOMO);
WS35-2 float switch; Stäubli filler coupling
MFE5-BW3-2-S22 3 Metal For oil as 5 mm
2
/s at max. 16 bars
MFE5-BW3-S57 3 Metal VW version
MFE5-BW3-2-S34 3 Metal Motor UL/CSA
MFE5-BW3-2-S37 3 Metal Basic version with WS35-2 float switch
MFE5-BW3-S41 3 Metal Motor with HAN6ES Harting connector; WS35-S30 float switch
MFE5-KW6 6 Plastic Basic version with WS32-2 float switch
MFE5-KW6-S1 6 Plastic Basic version with WS35-2 float switch
MFE5-KW6-S8 6 Plastic FKM (FPM) version, WS32-S8 float switch
MFE5-KW6-S24 6 Plastic VW version
MFE5-KW6-S33 6 Plastic Motor with HAN6ES Harting connector; WS35-S30 float switch
MFE5-BW7 6 Metal Basic version with WS32-2 float switch
MFE5-BW7-CF 6 Metal Basic version with WS35-2 float switch
MFE5-BW7-S8 6 Metal FKM (FPM) version, WS32-S8 float switch
MFE5-BW7-S22 6 Metal Motor UL/CSA
MFE5-BW7-S29 6 Metal French Automotiv version (CNOMO);
WS35-2 float switch; Stäubli filler coupling
MFE5-BW7-S54 6 Metal Unit for 50/95 weatherproofing (DIN 50015); WS32-2 float switch
MFE5-BW7-S120 6 Metal VW version
MFE5-BW7-S98 6 Metal VW version with filler coupling
MFE5-BW7-S107 6 Metal Motor with HAN6ES Harting connector; WS35-S30 float switch
MFE5-BW7-V57-L 6 Metal GM / OPEL version
MFE5-BW15 15 Metal Basic version with WS32-2 float switch; wall-mounted reservoir
MFE5-BW16 15 Metal Basic version with WS35-2 float switch; wall-mounted reservoir
MFE5-BW15-S7 15 Metal Basic version with WS35-2 float switch; foot-mounted reservoir
MFE5-BW16-S111 15 Metal VW version; foot-mounted reservoir
MFE5-BW16-S93 15 Metal Motor with HAN6ES Harting connector; WS35-S30 float switch
Gear pump units for single-line centralized lubrication systems
4 1-1202-US
Gear pump unit mounted separate from oil reservoir
Order No.
ME5
Gear pump unit for flange-mounting on oil reservoir
Order No. MFE5
Please quote voltage and frequency when
ordering.
A special sealed pump must be used for
horizontal flange-mounting of the unit in a
position below the oil level.
Gear pump unit model MFE5 complete with
metal or plastic reservoir (3, 6 and 15 liters)
see pages 7-9.
Fig. 1 Fig. 2
Fig. 4Fig. 3