VOCOlinc PM2/E Quick Start Manual

PM2/E

Smart Power Strip

1

Product Overview:

PM2/E smart Wi-Fi power strip can be controlled through Wi-Fi wireless network. You can switch on/off each outlet
and monitor its status wirelessly. The built-in power meter in outlet C (PM2 only) allows you to track power

consumption of a specific light or appliance on the LinkWise App.

1 x USB Type-A charging port supporting Qualcomm Quick Charge 3.0 (available with PM2 only);
2 x USB Type-A ports supporting DC5V, with total maximum current of 2.4A. USB ports are only for charging but not

for data transmission or APP control.

Press to turn on/off power supply

Indicates power supply status

Indicates on/off status of each outlet

Main Power Button

Main Power LED

Power Status LED

Reset Button/Wi-Fi
Connection LED

USB Ports

Overload
Protection Switch

1

2

3

4

5

6

Tap once to switch 3 outlets on/off simultaneously/Press & hold for about 5 seconds
to factory reset PM2/E. All connection data will be cleared. Must remove PM2/E
from the app and then add it back.

For charging only. To enable Quick Charge 3.0, the device being charged needs
to support this function.

When the load hits the maximum capacity, it will trigger overload protection and cut
off power supply. Manually pressing the switch back in can recover power supply.

2

Electrical Ratings

3 x Smart AC Outlets

Input: AC100~125V, 60Hz
Output: AC100~125V, 15A Max, 1800W Max (Pure Resistive Load)

What’s Included:

Key Features:

3 independent smart outlets and LED indicators
2 x USB charging ports
1 x Qualcomm Quick Charge 3.0 USB port – (available with PM2 only)

Energy monitoring (outlet C) – (available with PM2 only)
Works with Apple HomeKit

Works with Amazon Alexa
Can be applied to local or remote control of fans, lights, water coolers, heaters, rice cookers and more
Surge protection
Dual overload protection

PM2/E Smart Wi-Fi Power Strip
Quick Start Guide

Wi-Fi Connection LED Indicator Status

VOCOlinc PM2/E

Flashing quickly

Flashing slowly

Indicator status

Searching Wi-Fi

Adding a device

Flashing slowly 4 times and light on

Flashing slowly 4 times

Light on

A device added Successfully

Identifying a device

Connected to Wi-Fi

Light offDisconnected from Wi-Fi

Press & hold for about 5s

Flashing slowly

Flashing slowly then light on

Reset

OTA in Progress

OTA done

3

Quick Start Guide

1. Download and open the free VOCOlinc LinkWise app from the App Store (Apple App Store or Google Play).

2. Plug PM2/E into a desired outlet. Press & Hold the Reset Button for about 5 seconds, the Wi-Fi Connection LED
will start blinking blue to indicate it is ready for network setup.

3. Make sure your iPhone or iPad (iOS 10.1 or later) is connected to a 2.4GHz Wi-Fi network. Use the router utility
software to turn off 5GHz Wi-Fi networks.

4. Log in or sign up for a VOCOlinc account (required for Alexa configuration).

5. Tap “+” icon located on the top left corner and follow the on-screen directions to complete network setup.

Note: To add more devices (or repeat PM2/E setup process), tap “+” and you will see the accessory list. Each
accessory has an identification code, e.g., VOCOlinc-XXX-XXXXXX. Make sure the last 6 characters of the
identification code is consistent with the last 6 characters of MAC on the back of your PM2/E.

6. When prompted, scan the setup code or manually enter the setup code, and then follow the step to add the device
to the Home and Room.

After scanning the setup code, if the app prompts “Couldn’t add VOCOlinc-XXX-XXXXXX”, please refer to the first
FAQ. Please keep the setup code for future use.

3 x USB Ports

2 x USB DC 5V / 2.4A Max
1 x QC3.0 DC 5V / 3A, 9V / 2A, or 12V / 1.5A (PM2 only)

General use ONLY
Indoor dry location use ONLY

Safty Warnings

Plug directly into electric outlet (not into extension cord)
For indoor use only
Unplug PM2/E from outlet before cleaning
DO NOT clean with liquid
DO NOT remove ground pin (middle pin) as there is risk of electric shock
DO NOT use in wet or damp areas
Keep children away from PM2/E
DO NOT exceed recommended electrical ratings
DO NOT use in precision timing applications where inaccurate timing could be dangerous (sunlamps, saunas, etc.)
DO NOT use with devices that should not be operated unattendedly.
After switching off the the main power, DO NOT operate until the main power indicator goes completely off (about
2 seconds delay)
DO NOT use the device when the casing is broken