VocaTime Talking Atomic Dual Voice Analog Watch Instruction Manual

1

Instruction Manual

Talking Atomic, Dual Voice, Analog Watch

(USA-EURO Multi-Band)

IMPORTANT: Upon arrival if watch hands are NOT moving it is in sleep mode.

To begin using you must WAKE the watch up using the following procedure:
To Wake Up:

Press any button for 3 seconds. After the watch wakes up, the hands will spin to match
the internal time. Wait until the watch resume normal running.

Thank you for choosing the VocaTime Talking Atomic Watch!
Your Atomic, Dual Voice, Analog Talking Watch, features advanced technology which
provides highly accurate and precise time. The integrated self- setting Multi-Band
Atomic Radio in this watch is able to pick up the Atomic radio signals from within the
Continental USA, UK, GERMANY and JAPAN (60Khz only). In addition to the
automatic settings this watch also allow for manual setting when needed.

How Atomic function works: It receives a signal from the Atomic Clock, (which for

example In the USA located in Colorado) and measures each second of time as 9,192,631,770
vibrations of a cesium 133 atom in a vacuum, which is accurate to 1 second every million years.
Your Atomic Radio Controlled Watch even accounts automatically for daylight saving time.

2

Automatic Time Setting

Your Analog talking radio controlled watch automatically receives the Atomic Clock
signal at 3:00AM every night. After reception of signal it will display the official local
time on the watch. Everything is done automatically, (unless set manually).

Button Functions:

As shown in the image above please note the following:
The S1 button is located by and is also referred to as the 2:00 Button, S2 button is located
by and is also referred to as the 4:00 button, The S3 button is located by and is also10:00
button, and the S4 button is located by and is referred to as the 8:00 button

Basic Operating functions

To hear the Time announced:

Push S1 to talk
The watch will announce the Hour and Minute

To hear the Date announced:

Push S2 once to talk
The watch will announce the Day, Month, Date and Year after a signal is updated.
NOTE: After installing a New Battery the “Day announcement” will not be activated
until it gets a first signal-see instructions below.

Dual Voice: This Talking Watch features a Dual Voice, which allows you to choose to
hear announcements in either a Male Voice or a Female voice.

TO CHANGE VOICE (switching between male and female voice):

Push and Hold S2 until new voice announces current time or calendar setting.

Reception Status Check:

1. Push S4 once while the watch is in the real-time (regular) mode

2. If the reception was successful, the watch will announce “Country Name” follow by

“Time Updated”

If the reception has failed, the watch will say “Country name” follow by “Time Not
Updated”

Alarm Setting:

1. Push S3 once

2. The watch will announce the Alarm time that has been set

3. If the Alarm is turned Off, the watch will speak “Alarm is Off”

3

Reception Method of Atomic Radio Controlled Watches

Your watch should be positioned in the following shape and put near a window (or on a
non-metal window sill) during signal reception or you will not be able to get the best
reception result.

1. Correct positions for signal reception

For the metal case with metal band watch, the watch-band should be away from the
watch case as shown below (example: inserting a match box between the case back and
the metal band to separate the metal case from the metal band) or it will affect the
reception.

Country Signal Selection:

You can set your watch so that the Atomic signal will be received, when you are
located within the continental USA, UK, Germany or Japan (60 KHz).
After changing a Country setting, the watch will run with the new time accordingly.
Please wait while the second hand spins quickly around the dial until it has
completed and returns to normal second movement.

Select USA, UK, Germany, or Japan (60 KHz only) signal:

For USA signal, you need to set to your right Time Zone when setting the USA signal.

1. Holding S4 while the watch is in the real-time (regular) mode for more than 5

seconds until the watch announces “Set Alarm” – but follow instructions below

2. Push S4 another 3 times, until on the third press the watch announces “Global

signal selection, only when you visit this country”, it also states “Press S3 to Set”

3. After pressing S3 to set watch

4. It will then state “Press S1 to set”

Repeatedly press S1 until you reach the desired selection (as listed below):
UK
Germany
Japan (60 KHz only)
USA, Pacific
USA, Mountain,
USA, Central,
USA, Eastern