VMware View - 5.0 User Manual

VMware View Integration

View Manager 5.0

View Composer 2.7

This document supports the version of each product listed and supports all subsequent versions until the document is replaced by a new edition. To check for more recent editions of this document, see http://www.vmware.com/support/pubs.

EN-000505-00

VMware View Integration

You can find the most up-to-date technical documentation on the VMware Web site at:

http://www.vmware.com/support/

The VMware Web site also provides the latest product updates.

If you have comments about this documentation, submit your feedback to:

docfeedback@vmware.com

Copyright © 2011 VMware, Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws. VMware products are covered by one or more patents listed at

http://www.vmware.com/go/patents.

VMware is a registered trademark or trademark of VMware, Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be trademarks of their respective companies.

VMware, Inc.

3401 Hillview Ave. Palo Alto, CA 94304 www.vmware.com

2 VMware, Inc.

About This Book 5

1 Introduction 7

VMware View Components 7 Integration Interfaces to VMware View 8

2 Integrating with the Event Database 9

Event Database Tables and Schemas 9 Connection Broker Events 11 View Agent Events 17 View Administrator Events 17 View Transfer Server Events 25 Event Message Attributes 25 Sample Database Queries and Views 27

3 Using View PowerCLI 29

Introduction to View PowerCLI 29

Start the PowerShell Console with View PowerCLI Loaded 30 Displaying Help for a View PowerCLI cmdlet 30 Error Handling 30 Error When Piping and Specifying Objects at the Same Time 30

Escaping Characters in vCenter Path Names 31 View PowerCLI Cmdlets 31 View Administrator, View PowerCLI Cmdlet, and vdmadmin Operations 33 View PowerCLI Cmdlet Parameters 35

Default Display Protocol Settings 35

Deletion Policy Settings 35

Flash Quality Settings 36

Flash Throttling Settings 36

LDAP Backup Frequency 36

Pool Type Settings 37

Power Policy Settings 37

Refresh Policy Settings 38

Smart Card Authentication Settings 38

View Composer Maintenance Task Types 38 Examples of Using View PowerCLI Cmdlets 39

Displaying Information About a View Connection Server Instance 39

Updating the Configuration of a View Connection Server Instance 39

Managing the Configuration of vCenter Servers in VMware View 39

Managing Desktop Pools 39

Creating and Updating Automatically Provisioned Desktop Pools 40

Creating and Updating Linked-Clone Desktop Pools 40

Creating and Updating Manually Provisioned Desktop Pools 41

Creating Manual Unmanaged Desktop Pools 41

Creating and Updating Desktops Provisioned by Terminal Servers 41

Obtaining Information About Users and Groups from Active Directory 41

Managing Desktop Entitlements 42

VMware, Inc. 3

VMware View Integration

Managing Local Desktops 42

Managing Remote Sessions 42

Managing Virtual Machines 42

Displaying Information About Physical Computers 43

Updating the Ownership of Machines 43

Displaying Information About Events 43

Managing the Global Configuration of VMware View 43

Managing View Licenses 44 Examples of Using View PowerCLI for Enhanced Functionality 44

Checking if a View Connection Server Instance Is Running 44

Resize Automatic and Linked-Clone Desktop Pools 45

Determining Paths to vSphere Inventory Objects 46

Determining Paths to vSphere Datastore Objects 47

Adding and Removing Datastores 47

4 Customizing LDAP Data 49

LDAP Configuration Data 49 Export LDAP Configuration Data 50 Modify LDAP Configuration Data 50 Import LDAP Configuration Data 53 Import LDAP Configuration Data Using the LDIFDE Command 54

5 Integrating with SCOM 55

View Management Packs 55 Name a View Connection Server Group 56 Import the View MPs 56 View Discovery Script 56 Run the Discovery Script 57 Display Discovered Objects 57 Display Managed Objects 58 Views and Monitors 58

Performance Data Collection Settings 59 Enable a Proxy Agent on a Server 60 Display Performance Data 60 Display Information About an Alert 60 Restart a Service 60 Exclude a Domain from Connectivity Monitoring 60 Close Alerts 61 Class and Relationship Definitions 61

6 Examining PCoIP Session Statistics 65

Usage Notes for Recorded Statistics 65 General Session Statistics 66 Audio Statistics 66 Imaging Statistics 67 Network Statistics 67 USB Statistics 68 Examples of Using PowerShell to Examine PCoIP Statistics 68

Index 69

4 VMware, Inc.

About This Book

This guide describes how to integrate VMware View™ software with third-party software such as Windows PowerShell, business intelligence reporting engines, and Microsoft System Center Operations Manager (SCOM).

Intended Audience

This book is intended for anyone who wants to customize or integrate software to work with View Manager. The information in this manual is written for experienced Windows or Linux system administrators who are familiar with virtual machine technology and datacenter operations.

VMware Technical Publications Glossary

VMware Technical Publications provides a glossary of terms that might be unfamiliar to you. For definitions of terms as they are used in VMware technical documentation go to http://www.vmware.com/support/pubs.

Document Feedback

VMware welcomes your suggestions for improving our documentation. If you have comments, send your feedback to docfeedback@vmware.com

Technical Support and Education Resources

The following sections describe the technical support resources available to you. To access the current version of this book and other books, go to http://www.vmware.com/support/pubs.

Online and Telephone Support

To use online support to submit technical support requests, view your product and contract information, and register your products, go to http://www.vmware.com/support.

Customers with appropriate support contracts should use telephone support for the fastest response on priority 1 issues. Go to http://www.vmware.com/support/phone_support.

Support Offerings

To find out how VMware support offerings can help meet your business needs, go to

http://www.vmware.com/support/services.

VMware, Inc. 5

VMware View Integration

VMware Professional Services

VMware Education Services courses offer extensive hands-on labs, case study examples, and course materials designed to be used as on-the-job reference tools. Courses are available onsite, in the classroom, and live online. For onsite pilot programs and implementation best practices, VMware Consulting Services provides offerings to help you assess, plan, build, and manage your virtual environment. To access information about education classes, certification programs, and consulting services, go to http://www.vmware.com/services.

6 VMware, Inc.

Introduction

With VMware View™, system administrators can provision desktops and control user access to these desktops. Client software connects users to virtual desktops running on VMware vSphere™, or to physical systems running within your network environment.

This chapter includes the following topics:

 “VMware View Components” on page 7

 “Integration Interfaces to VMware View” on page 8

VMware View Components

You can use VMware View with VMware vCenter Server to create desktops from virtual machines that are running on VMware ESX VMware View uses your existing Active Directory infrastructure for user authentication and management.

After you create a desktop, authorized end users can use Web-based or locally installed client software to securely connect to centralized virtual desktops, back-end physical systems, or terminal servers.

VMware View consists of the following major components:

 View Connection Server – a software service that acts as a broker for client connections by authenticating

and then directing incoming user requests to the appropriate virtual desktop, physical desktop, or terminal server.

or VMware ESXi™ hosts and deploy these desktops to end users. In addition,

 View Agent – a software service that is installed on all guest virtual machines, physical systems, or

terminal servers in order to allow them to be managed by VMware View. The agent provides features such as connection monitoring, Virtual Printing, USB support, and single sign-on.

 View Client – a software application that communicates with View Connection Server to allow users to

connect to their desktops.

 View Client with Local Mode – a version of View Client that is extended to support the local desktop

feature, which allows users to download virtual machines and use them on their local systems.

 View Administrator – a Web application that allows View administrators to configure View Connection

Server, deploy and manage desktops, control user authentication, initiate and examine system events, and carry out analytical activities.

 vCenter Server – a server that acts as a central administrator for ESX/ESXi hosts that are connected on a

network. A vCenter Server provides the central point for configuring, provisioning, and managing virtual machines in the datacenter.

 View Composer – a software service that is installed on a vCenter server to allow VMware View to rapidly

deploy multiple linked-clone desktops from a single centralized base image.

 View Transfer Server – a software service that manages and streamlines data transfers between the

datacenter and View desktops that are checked out for use on end users' local systems. View Transfer Server is required to support desktops that run View Client with Local Mode.

VMware, Inc. 7

VMware View Integration

Integration Interfaces to VMware View

You can use several interfaces to integrate VMware View with external applications.

 Event database – you can configure VMware View to record events to a Microsoft SQL Server or Oracle

database. You can then use business intelligence reporting engines to access and analyze this database.

 View PowerCLI – you can use the PowerShell interface to perform a wide variety of administration tasks

on View components.

 Lightweight Directory Access Protocol (LDAP) – you can export and import LDAP configuration data

from and into VMware View. You can create scripts that update this configuration data without accessing View Administrator directly.

 Microsoft System Center Operations Manager (SCOM) – you can monitor the operations of View

components from the SCOM console.

 Windows Management Instrumentation (WMI) – you can examine performance statistics for a PCoIP

session.

8 VMware, Inc.

Integrating with the Event Database

You can configure VMware View to record events to a Microsoft SQL Server or Oracle database. VMware View records events such as the following examples:

 End-user actions such as logging in and starting a desktop session.

 Administrator actions such as adding entitlements and creating desktop pools.

 Alerts that report system failures and errors.

 Statistical sampling such as recording the maximum number of users over a 24-hour period.

You can use business intelligence reporting engines such as Crystal Reports, IBM Cognos, MicroStrategy 9, and Oracle Enterprise Performance Management System to access and analyze the event database.

This chapter includes the following topics:

 “Event Database Tables and Schemas” on page 9

 “Connection Broker Events” on page 11

 “View Agent Events” on page 17

 “View Administrator Events” on page 17

 “View Transfer Server Events” on page 25

 “Event Message Attributes” on page 25

 “Sample Database Queries and Views” on page 27

Event Database Tables and Schemas

Tab le 2-1 shows the tables that implement the event database in VMware View.

Tabl e 2-1. Event Database Tables

Table Name Description

event Metadata and search optimization data for recent events.

event_data Data values for recent events.

event_data_historical Data values for all events.

event_historical Metadata and search optimization data for all events.

The event database prepends the names of these tables with a prefix that you define when you set up the database. See the VMware View Installation document for more information.

IMPORTANT VMware View does not restrict the growth of the event_historical and event_data_historical tables. You must implement a space management policy for these tables.

VMware, Inc. 9

VMware View Integration

VMware View records details about events to all the database tables. After a certain period of time has elapsed since writing an event record, VMware View deletes the record from the event and event_data tables. You can use View Administrator to configure the time period for which the database keeps a record in the event and event_data tables. See the VMware View Installation document for more information.

OTE It is possible for events to be lost if you restart View Connection Server instances while the event

database is not running. For a solution that avoids this problem see http://kb.vmware.com/kb/1021461.

A unique primary key, EventID, identifies each event that VMware View records in the event and event_ historical tables. VMware View records data values for each event in the event_data and event_data_historical tables. You can obtain the complete set of information for an event by joining the event and event_data tables or the event_historical and event_data_historical tables on the EventID column.

The EventType, Severity, and Time columns in the event and event_historical tables identify the type and severity of an event and the time at which it occurred.

Tab le 2-2 shows the schema for the event and event_historical tables.

Tabl e 2-2. Schema for the event and event_historical Tables

Column Name

Acknowledged SMALLINT tinyint Whether VMware View acknowledged the

DesktopId NVARCHAR2(512) nvarchar(512) Desktop ID of the associated pool.

EventID INTEGER int Unique primary key for the event.

EventType NVARCHAR2(512) nvarchar(512) Event name that corresponds to an item in

FolderPath NVARCHAR2(512) nvarchar(512) Full path of the folder that contains the

GroupId NVARCHAR2(512) nvarchar(512) SID of the associated group in Active

LUNId NVARCHAR2(512) nvarchar(512) ID of the LUN that stores the associated

MachineId NVARCHAR2(512) nvarchar(512) ID of the associated physical or virtual

Module NVARCHAR2(512) nvarchar(512) View component that raised the event. For

ModuleAndEventText NVARCHAR2(512) nvarchar(512) Event message with values substituted for

Node NVARCHAR2(512) nvarchar(512) Name of the virtual device node.

Severity NVARCHAR2(512) nvarchar(512) Severity level. For example, INFO,

Source NVARCHAR2(512) nvarchar(512) Identifier for the source of the event.

ThinAppId NVARCHAR2(512) nvarchar(512) ID of the associated ThinApp™ object.

Time TIMESTAMP datetime Time at which the event occurred,

UserDiskPathId NVARCHAR2(512) nvarchar(512) ID of the user disk.

UserSID NVARCHAR2(512) nvarchar(512) SID of the associated user in Active

Oracle Data Type

SQLServer Data Type Description

event.

0 = false

1 = true

the message catalog. For example, BROKER_USERLOGGEDIN.

associated object.

Directory.

object.

machine.

example, Admin, Broker, Tunnel, Framework, Client, or Agent.

attribute parameters.

WARNING, ERROR, AUDIT_SUCCESS, AUDIT_FAIL.

measured from the epoch (January 1, 1970).

Directory.

10 VMware, Inc.

Chapter 2 Integrating with the Event Database

Tab le 2-3 shows the schema for the event_data and event_data_historical tables.

Tabl e 2-3. Schema for the event_data and event_data_historical Tables

Oracle

Column Name

BooleanValue SMALLINT tinyint Value of a Boolean attribute.

EventID INTEGER int Unique primary key for the event.

IntValue INTEGER int Value of an integer attribute.

Name NVARCHAR2(512) nvarchar(512) Attribute name (for example,

StrValue NVARCHAR2(512) nvarchar(512) Value of a string attribute. For other types

TimeValue TIMESTAMP datetime Value of a date and time attribute.

Type SMALLINT tinyint The data type of the attribute.

Data Type

SQLServer Data Type Description

0 = false

1 = true

UserDisplayName).

of attributes, this column contains an interpretation of the data type as a string.

0 = StrValue

1 = IntValue

2 = TimeValue

3 = BooleanValue

Connection Broker Events

Tab le 2-4 shows the event types for the connection broker.

The BROKER_DAILY_MAX_USERS event reports the maximum number of concurrent desktop sessions over a 24-hour period. Short-lived sessions might not be included in the count because the sampling is performed every five minutes.

The BROKER_VC_DISABLED and BROKER_VC_ENABLED events report the state of of the vCenter driver that VMware View uses to track a vCenter Server. The BROKER_VC_STATUS_* events report the state of a vCenter Server.

Tabl e 2-4. Connection Broker Events

EventType Severity ModuleAndEventText

BROKER_AGENT_OFFLINE WARNING The agent running on machine

BROKER_AGENT_ONLINE WARNING The agent running on machine

BROKER_DAILY_MAX_USERS INFO ${Time}: Over the past 24 hours, the

BROKER_DESKTOP_LAUNCH_FAILURE ERROR Unable to launch from Pool ${DesktopId}

BROKER_DESKTOP_NOT_ENTITLED AUDIT_FAIL Unable to launch from Pool ${DesktopId}

${MachineName} has not responded to queries, marking it as offline

${MachineName} is responding again, but did not send a startup message

maximum number of users with concurrent desktop sessions was ${UserCount}

for user ${UserDisplayName}: The broker encountered an error while processing the request, please contact support for assistance

for user ${UserDisplayName}: User is not entitled to this Pool

VMware, Inc. 11

VMware View Integration

Tabl e 2-4. Connection Broker Events (Continued)

EventType Severity ModuleAndEventText

BROKER_DESKTOP_PROTOCOL_NOT_ SUPPORTED

BROKER_DESKTOP_REQUEST INFO User ${UserDisplayName} requested Pool

BROKER_EVENT_HANDLING_STARTED INFO Broker ${BrokerName} has started

BROKER_EVENT_HANDLING_STOPPED INFO ${BrokerName} has stopped handling

BROKER_LOCALMODE_OLD_ANCHOR_ DELETE_FAILURE

BROKER_LOCALMODE_OPERATION_AUDIT_ FAI LUR E

BROKER_LOCALMODE_OPERATION_ FAI LUR E

BROKER_LOCALMODE_OPERATION_ SUCCESS

BROKER_MACHINE_ALLOCATED INFO User ${UserDisplayName} requested Pool

BROKER_MACHINE_ASSIGNED_ UNAVAILABLE

BROKER_MACHINE_CANNOT_CONNECT AUDIT_FAIL Unable to launch from Pool ${DesktopId}

BROKER_MACHINE_CHECKEDOUT AUDIT_FAIL Unable to launch from Pool ${DesktopId}

BROKER_MACHINE_CONFIGURED_VIDEO_ SETTINGS

BROKER_MACHINE_NOT_READY WARNING Unable to launch from Pool ${DesktopId}

BROKER_MACHINE_OPERATION_DELETED INFO machine ${MachineName} has been

BROKER_MACHINE_PROTOCOL_NOT_ SUPPORTED

BROKER_MACHINE_PROTOCOL_ UNAVAILABLE

AUDIT_FAIL Unable to launch from Pool ${DesktopId}

for user ${UserDisplayName}: Requested protocol ${ProtocolId} is not supported

${DesktopId}

handling events

events

WARNING Old anchor snapshot deletion task failed

for Machine ${MachineName}. Error message: ${LocalModeMessage}

AUDIT_FAIL Local Mode Operation

${LocalModeOperation} failed for Desktop ${MachineName}, ID: ${DesktopId}. Error message: ${LocalModeMessage}

ERROR Local Mode Operation

${LocalModeOperation} failed for Desktop ${MachineName}, ID: ${DesktopId}. Error message: ${LocalModeMessage}

AUDIT_SUCCESS ${LocalModeOperation} has completed for

Desktop ${MachineName}, ID: ${DesktopId}.

${DesktopId}, allocated machine ${MachineName}

AUDIT_FAIL Unable to launch from Pool ${DesktopId}

for user ${UserDisplayName}: Assigned machine ${MachineName} is unavailable

for user ${UserDisplayName}: Failed to connect to Machine ${MachineName} using ${ProtocolId}

for user ${UserDisplayName}: VM ${MachineName} is currently checked out on a client device

INFO Successfully configured video settings for

Machine VM ${MachineName} in Pool ${DesktopId}

for user ${UserDisplayName}: Machine ${MachineName} is not ready to accept connections

deleted

AUDIT_FAIL Unable to launch from Pool ${DesktopId}

for user ${UserDisplayName}: Machine ${MachineName} does not support protocol ${ProtocolId}

AUDIT_FAIL Unable to launch from Pool ${DesktopId}

for user ${UserDisplayName}: Machine ${MachineName} did not report protocol ${ProtocolId} as ready

12 VMware, Inc.

Chapter 2 Integrating with the Event Database

Tabl e 2-4. Connection Broker Events (Continued)

EventType Severity ModuleAndEventText

BROKER_MACHINE_REJECTED_SESSION WARNING Unable to launch from Pool ${DesktopId}

BROKER_MACHINE_SESSION_TIMEDOUT WARNING Session for user ${UserDisplayName}

BROKER_POOL_CANNOT_ASSIGN AUDIT_FAIL Unable to launch from Pool ${DesktopId}

BROKER_POOL_COMANAGER_REQUIRED AUDIT_FAIL Unable to launch from Pool ${DesktopId}

BROKER_POOL_EMPTY AUDIT_FAIL Unable to launch from Pool ${DesktopId}

BROKER_POOL_NO_MACHINE_ASSIGNED AUDIT_FAIL Unable to launch from Pool ${DesktopId}

BROKER_POOL_NO_RESPONSES AUDIT_FAIL Unable to launch from Pool ${DesktopId}

BROKER_POOL_OVERLOADED AUDIT_FAIL Unable to launch from Pool ${DesktopId}

BROKER_POOL_POLICY_VIOLATION AUDIT_FAIL Unable to launch from Pool ${DesktopId}

BROKER_POOL_PROTOCOL_NOT_

AUDIT_FAIL Unable to launch from Pool ${DesktopId}

SUPPORTED

BROKER_POOL_PROTOCOL_UNAVAILABLE AUDIT_FAIL Unable to launch from Pool ${DesktopId}

BROKER_POOL_TUNNEL_NOT_SUPPORTED AUDIT_FAIL Unable to launch from Pool ${DesktopId}

BROKER_PROVISIONING_ERROR_CONFIG_

INFO The previously reported configuration

CLEARED

BROKER_PROVISIONING_ERROR_CONFIG_

ERROR Provisioning error occurred on Pool

SET

BROKER_PROVISIONING_ERROR_DISK_

INFO The previously reported disk problem is no

CLEARED

BROKER_PROVISIONING_ERROR_DISK_LC_

INFO The previously reported error due to

RESERVATION_CLEARED

for user ${UserDisplayName}: Machine ${MachineName} rejected the start session request

timed out

for user ${UserDisplayName}: There are no machines available to assign the user to

for user ${UserDisplayName}: No co-management availability for protocol ${ProtocolId}

for user ${UserDisplayName}: The Desktop Pool is empty

for user ${UserDisplayName}: No machine assigned to this user

for user ${UserDisplayName}: No machines in the Desktop Pool are responsive

for user ${UserDisplayName}: All responding machines are currently in use

for user ${UserDisplayName}: This Desktop Pool does not allow online sessions

for user ${UserDisplayName}: There were no machines available that support protocol ${ProtocolId}

for user ${UserDisplayName}: There were no machines available that reported protocol ${ProtocolId} as ready

for user ${UserDisplayName}: Tunnelling is not supported for protocol ${ProtocolId}

problem is no longer present on Pool ${DesktopId}

${DesktopId} because of a configuration problem

longer present on Pool ${DesktopId}

available free disk space reserved for linked clones is no longer present on Pool ${DesktopId}

VMware, Inc. 13

VMware View Integration

Tabl e 2-4. Connection Broker Events (Continued)

EventType Severity ModuleAndEventText

BROKER_PROVISIONING_ERROR_DISK_LC_ RESERVATION_SET

BROKER_PROVISIONING_ERROR_DISK_SET WARNING Provisioning error occurred on Pool

BROKER_PROVISIONING_ERROR_LICENCE_ CLEARED

BROKER_PROVISIONING_ERROR_LICENCE_ SET

BROKER_PROVISIONING_ERROR_ NETWORKING_CLEARED

BROKER_PROVISIONING_ERROR_ NETWORKING_SET

BROKER_PROVISIONING_ERROR_RESOURCE_ CLEARED

BROKER_PROVISIONING_ERROR_RESOURCE_ SET

BROKER_PROVISIONING_ERROR_TIMEOUT_ CUSTOMIZATION_CLEARED

BROKER_PROVISIONING_ERROR_TIMEOUT_ CUSTOMIZATION_SET

BROKER_PROVISIONING_ERROR_VM_ CLONING

BROKER_PROVISIONING_ERROR_VM_ CUSTOMIZATION_ERROR

BROKER_PROVISIONING_ERROR_VM_ CUSTOMIZATION_NETWORKING

BROKER_PROVISIONING_ERROR_VM_ CUSTOMIZATION_TIMEOUT

BROKER_PROVISIONING_SVI_ERROR_ COMPOSER_AGENT_INIT_FAILED

BROKER_PROVISIONING_SVI_ERROR_ RECONFIG_FAILED

BROKER_PROVISIONING_SVI_ERROR_REFIT_ FAI LED

BROKER_PROVISIONING_SVI_ERROR_ REMOVING_VM

ERROR Provisioning error occurred on Pool

${DesktopId} because available free disk space is reserved for linked clones

${DesktopId} because of a disk problem

INFO The previously reported licencing problem

is no longer present on Pool ${DesktopId}

ERROR Provisioning error occurred on Pool

${DesktopId} because of a licencing problem

INFO The previously reported networking

problems with a View Agent are no longer present on Pool ${DesktopId}

ERROR Provisioning error occurred on Pool

${DesktopId} because of a networking problem with a View Agent

INFO The previously reported resource problem

is no longer present on Pool ${DesktopId}

ERROR Provisioning error occurred on Pool

${DesktopId} because of a resource problem

INFO The previously reported timeout while

customizing is no longer present on Pool ${DesktopId}

ERROR Provisioning error occurred on Pool

${DesktopId} because of a timeout while customizing

ERROR Provisioning error occurred for Machine

${MachineName}: Cloning failed for Machine

ERROR Provisioning error occurred for Machine

${MachineName}: Customization failed for Machine

ERROR Provisioning error occurred for Machine

${MachineName}: Customization error due to no network communication between the View agent and Connection Server

ERROR Provisioning error occurred for Machine

${MachineName}: Customization operation timed out

ERROR Provisioning error occurred for Machine

${MachineName}: View Composer agent initialization failed

ERROR Provisioning error occurred for Machine

${MachineName}: Reconfigure operation failed

ERROR Provisioning error occurred for Machine

${MachineName}: Refit operation ${SVIOperation} failed

ERROR Provisioning error occurred for Machine

${MachineName}: Unable to remove Machine from inventory

14 VMware, Inc.

Chapter 2 Integrating with the Event Database

Tabl e 2-4. Connection Broker Events (Continued)

EventType Severity ModuleAndEventText

BROKER_PROVISIONING_VERIFICATION_ FAILED_USER_ASSIGNED

BROKER_PROVISIONING_VERIFICATION_ FAILED_USER_CANNOT_BE_ASSIGNED

BROKER_PROVISIONING_VERIFICATION_ FAILED_VMNAME_IN_USE

BROKER_SECURITY_SERVER_ADD_FAILED AUDIT_FAIL Failed to add security server

BROKER_SECURITY_SERVER_ADD_FAILED_ PASSWORD_EXPIRED

BROKER_SECURITY_SERVER_ADD_FAILED_ PASSWORD_INCORRECT

BROKER_SECURITY_SERVER_ADD_FAILED_ PASSWORD_NOT_SET

BROKER_SECURITY_SERVER_ADDED AUDIT_SUCCESS Security server ${SecurityServerId} added

BROKER_SVI_ARCHIVE_UDD_FAILED AUDIT_FAIL Failed to archive user data disk

BROKER_SVI_ARCHIVE_UDD_SUCCEEDED AUDIT_SUCCESS Archived user data disk ${UserDiskName}

BROKER_SVI_ATTACH_UDD_FAILED AUDIT_FAIL Failed to attach user data disk

BROKER_SVI_ATTACH_UDD_SUCCEEDED AUDIT_SUCCESS Attached user data disk ${UserDiskName}

BROKER_SVI_DETACH_UDD_FAILED AUDIT_FAIL Failed to detach user data disk

BROKER_SVI_DETACH_UDD_SUCCEEDED AUDIT_SUCCESS Detached user data disk ${UserDiskName}

BROKER_USER_AUTHFAILED_ACCOUNT_ DISABLED

BROKER_USER_AUTHFAILED_ACCOUNT_ EXPIRED

BROKER_USER_AUTHFAILED_ACCOUNT_ LOCKED_OUT

BROKER_USER_AUTHFAILED_ACCOUNT_ RESTRICTION

BROKER_USER_AUTHFAILED_BAD_USER_ PASSWORD

BROKER_USER_AUTHFAILED_GENERAL AUDIT_FAIL User ${UserDisplayName} failed to

WARNING Provisioning verification failed for

Machine ${MachineName}: User is already assigned to a machine in Pool ${DesktopId}

WARNING Provisioning verification failed for

Machine ${MachineName}: A user cannot be assigned because Pool ${DesktopId} is not persistent

WARNING Provisioning verification failed for

Machine ${MachineName}: A machine already exists in Pool ${DesktopId} with name ${MachineName}

${SecurityServerId}

AUDIT_FAIL Failed to add security server

${SecurityServerId}, pairing password expired

AUDIT_FAIL Failed to add security server

${SecurityServerId}, pairing password incorrect

AUDIT_FAIL Failed to add security server

${SecurityServerId}, pairing password not set

${UserDiskName} to location ${SVIPath}

to location ${SVIPath}

${UserDiskName} to VM ${SVIVMID}

to VM ${SVIVMID}

${UserDiskName} from VM ${SVIVMID}

from VM ${SVIVMID}

AUDIT_FAIL User ${UserDisplayName} failed to

authenticate because the account is disabled

AUDIT_FAIL User ${UserDisplayName} failed to

authenticate because the account has expired

AUDIT_FAIL User ${UserDisplayName} failed to

authenticate because the account is locked out

AUDIT_FAIL User ${UserDisplayName} failed to

authenticate because of an account restriction

AUDIT_FAIL User ${UserDisplayName} failed to

authenticate because of a bad username or password

authenticate

VMware, Inc. 15

VMware View Integration

Tabl e 2-4. Connection Broker Events (Continued)

EventType Severity ModuleAndEventText

BROKER_USER_AUTHFAILED_NO_LOGON_ SERVERS

BROKER_USER_AUTHFAILED_PASSWORD_ EXPIRED

BROKER_USER_AUTHFAILED_PASSWORD_ MUST_CHANGE

BROKER_USER_AUTHFAILED_SECUREID_ ACCESS_DENIED

BROKER_USER_AUTHFAILED_SECUREID_ NEWPIN_REJECTED

BROKER_USER_AUTHFAILED_SECUREID_ WRONG_NEXTTOKEN

BROKER_USER_AUTHFAILED_SECUREID_ WRONG_STATE

BROKER_USER_AUTHFAILED_TIME_ RESTRICTION

BROKER_USER_NOT_AUTHORIZED AUDIT_FAIL User ${UserDisplayName} has

BROKER_USER_NOT_ENTITLED AUDIT_FAIL User ${UserDisplayName} has

BROKER_USERCHANGEDPASSWORD AUDIT_SUCCESS Password for ${UserDisplayName} has

BROKER_USERLOGGEDIN AUDIT_SUCCESS User ${UserDisplayName} has logged in

BROKER_USERLOGGEDOUT AUDIT_SUCCESS User ${UserDisplayName} has logged out

BROKER_VC_DISABLED INFO vCenter at address ${VCAddress} has been

BROKER_VC_ENABLED INFO vCenter at address ${VCAddress} has been

BROKER_VC_STATUS_CHANGED_CANNOT_ LOGIN

BROKER_VC_STATUS_CHANGED_DOWN INFO vCenter at address ${VCAddress} is down

BROKER_VC_STATUS_CHANGED_INVALID_ CREDENTIALS

BROKER_VC_STATUS_CHANGED_NOT_YET_ CONNECTED

BROKER_VC_STATUS_CHANGED_ RECONNECTING

BROKER_VC_STATUS_CHANGED_UNKNOWN WARNING The status of vCenter at address

BROKER_VC_STATUS_CHANGED_UP INFO vCenter at address ${VCAddress} is up

MULTIPLE_DESKTOPS_FOR_KIOSK_USER WARNING User ${UserDisplayName} is entitled to

AUDIT_FAIL User ${UserDisplayName} failed to

authenticate because there are no logon servers

AUDIT_FAIL User ${UserDisplayName} failed to

authenticate because the password has expired

AUDIT_FAIL User ${UserDisplayName} failed to

authenticate because the password must change

AUDIT_FAIL SecurID access denied for user

${UserDisplayName}

AUDIT_FAIL SecurID access denied for user

${UserDisplayName} because new pin was rejected

AUDIT_FAIL SecurID access denied for user

${UserDisplayName} because wrong next token entered

AUDIT_FAIL SecurID access denied for user

${UserDisplayName} because of incorrect state

AUDIT_FAIL User ${UserDisplayName} failed to

authenticate because of a time restriction

authenticated, but is not authorized to perform the operation

authenticated, but is not entitled to any Pools

been changed by the user

temporarily disabled

enabled

WARNING Cannot log in to vCenter at address

${VCAddress}

WARNING vCenter at address ${VCAddress} has

invalid credientials

INFO Not yet connected to vCenter at address

${VCAddress}

INFO Reconnecting to vCenter at address

${VCAddress}

${VCAddress} is unknown

multiple desktop pools

16 VMware, Inc.

View Agent Events

Tab le 2-5 shows the event types for View Agent.

Tabl e 2-5. View Agent Events

EventType Severity ModuleAndEventText

AGENT_CONNECTED INFO User ${UserDisplayName} has logged in to a new session on

AGENT_DISCONNECTED INFO User ${UserDisplayName} has disconnected from machine

AGENT_ENDED INFO User ${UserDisplayName} has logged off machine

AGENT_PENDING INFO The agent running on machine ${MachineName} has accepted an

AGENT_PENDING_ EXPIRED

AGENT_RECONFIGURED INFO Machine ${MachineName} has been successfully reconfigured

AGENT_RECONNECTED INFO User ${UserDisplayName} has reconnected to machine

AGENT_RESUME INFO The agent on machine ${MachineName} sent a resume message

AGENT_SHUTDOWN INFO The agent running on machine ${MachineName} has shut down,

AGENT_STARTUP INFO The agent running on machine ${MachineName} has contacted the

AGENT_SUSPEND INFO The agent on machine ${MachineName} sent a suspend message

Chapter 2 Integrating with the Event Database

machine ${MachineName}

${MachineName}

allocated session for user ${UserDisplayName}

WARNING The pending session on machine ${MachineName} for user

${UserDisplayName} has expired

${MachineName}

this machine will be unavailable

connection server and sent a startup message

View Administrator Events

Tab le 2-6 shows the event types for View Administrator.

Tabl e 2-6. View Administrator Events

EventType Severity ModuleAndEventText

ADMIN_ADD_DESKTOP_ENTITLEMENT AUDIT_SUCCESS ${EntitlementDisplay} was entitled to Pool

ADMIN_ADD_LICENSE AUDIT_SUCCESS ${UserDisplayName} added license

ADMIN_ADD_LICENSE_FAILED AUDIT_FAIL ${UserDisplayName} failed to add license

ADMIN_ADD_PM AUDIT_SUCCESS ${UserDisplayName} added physical

ADMIN_ADD_PM_FAILED AUDIT_FAIL ${UserDisplayName} failed to add physical

ADMIN_ADD_THINAPP_ENTITLEMENT AUDIT_SUCCESS Application ${ThinAppDisplayName} was

ADMIN_ADD_THINAPP_ENTITLEMENT_ FAI LED

ADMIN_ADD_THINAPP_POOL_ ENTITLEMENT

ADMIN_ADMINSTRATOR_REMOVE_FAILED AUDIT_FAIL ${UserDisplayName} failed to remove all

${DesktopId} by ${UserDisplayName}

machine ${MachineName} to Pool ${DesktopId}

assigned to Desktop ${MachineName} by ${UserDisplayName}

AUDIT_FAIL ${UserDisplayName} failed to add

Application entitlement

AUDIT_SUCCESS Application ${ThinAppDisplayName} was

assigned to Pool ${DesktopId} by ${UserDisplayName}

permissions for Administrator ${AdminPermissionEntity}

VMware, Inc. 17

VMware View Integration

Tabl e 2-6. View Administrator Events (Continued)

EventType Severity ModuleAndEventText

ADMIN_ADMINSTRATOR_REMOVED AUDIT_SUCCESS ${UserDisplayName} removed all

ADMIN_CONFIGURE_TRANSFER_SERVER_ LOCAL_REPO

ADMIN_CONFIGURE_TRANSFER_SERVER_ NETWORK_REPO

ADMIN_CONNECTION_BROKER_UPDATE_ FAI LED

ADMIN_CONNECTION_BROKER_UPDATED AUDIT_SUCCESS ${UserDisplayName} updated connection

ADMIN_CONNECTION_SERVER_BACKUP_ FAI LED

ADMIN_CONNECTION_SERVER_BACKUP_ INITIATED

ADMIN_CONNECTION_SERVER_DISABLE_ FAI LED

ADMIN_CONNECTION_SERVER_DISABLED AUDIT_SUCCESS ${UserDisplayName} is disabling

ADMIN_CONNECTION_SERVER_ENABLE_ FAI LED

ADMIN_CONNECTION_SERVER_ENABLED AUDIT_SUCCESS ${UserDisplayName} is enabling

ADMIN_DATABASE_CONFIGURATION_ADD_ FAI LED

ADMIN_DATABASE_CONFIGURATION_ ADDED

ADMIN_DATABASE_CONFIGURATION_ DELETE_FAILED

ADMIN_DATABASE_CONFIGURATION_ UPDATE_FAILED

ADMIN_DATABASE_CONFIGURATION_ UPDATED

ADMIN_DEFAULT_DESKTOPPOOL_ASSIGN AUDIT_SUCCESS ${UserDisplayName} assigned Pool

ADMIN_DEFAULT_DESKTOPPOOL_ASSIGN_ FAI LED

ADMIN_DEFAULT_DESKTOPPOOL_ UNASSIGN

ADMIN_DEFAULT_DESKTOPPOOL_ UNASSIGN_FAILED

ADMIN_DELETE_PACKAGE INFO Delete transfer package ${PackageName}

permissions for Administrator ${AdminPermissionEntity}

INFO Configure a local Transfer Server

Repository. Path ${PathName}

INFO Configure a network Transfer Server

Repository. Path: ${PathName}, domain: ${DomainName}, user name ${DomainUser}

AUDIT_FAIL ${UserDisplayName} failed to update

connection broker ${BrokerId}

broker ${BrokerId}: (${AttrChangeType}: ${AttrName} = ${AttrValue})

AUDIT_FAIL ${UserDisplayName} failed to initiate a

backup of connection broker ${BrokerId}

AUDIT_SUCCESS ${UserDisplayName} initiated a backup of

connection broker ${BrokerId}

AUDIT_FAIL ${UserDisplayName} failed to disable

connection broker ${BrokerId}

AUDIT_FAIL ${UserDisplayName} failed to enable

connection broker ${BrokerId}

AUDIT_FAIL ${UserDisplayName} failed to add

database configuration

AUDIT_SUCCESS ${UserDisplayName} has added database

configuration

AUDIT_FAIL ${UserDisplayName} failed to delete

database configuration

AUDIT_SUCCESS ${UserDisplayName} has deleted database

configuration

AUDIT_FAIL ${UserDisplayName} failed to update

database configuration

AUDIT_SUCCESS ${UserDisplayName} has updated

database configuration

${DesktopId} for default desktop to ${UserName}

AUDIT_FAIL ${UserDisplayName} failed to assign Pool

${DesktopId} for default desktop to ${UserName}

AUDIT_SUCCESS ${UserDisplayName} removed pool

assignment for default desktop to ${UserName}

AUDIT_FAIL ${UserDisplayName} failed to remove Pool

assignment for default desktop to ${UserName}

18 VMware, Inc.

Chapter 2 Integrating with the Event Database

Tabl e 2-6. View Administrator Events (Continued)

EventType Severity ModuleAndEventText

ADMIN_DESKTOP_ADDED AUDIT_SUCCESS ${UserDisplayName} added Pool

ADMIN_DESKTOP_ASSIGN AUDIT_SUCCESS ${UserDisplayName} assigned Desktop

ADMIN_DESKTOP_ASSIGN_FAILED AUDIT_FAIL ${UserDisplayName} failed to assign

ADMIN_DESKTOP_EDITED AUDIT_SUCCESS ${UserDisplayName} edited Pool

ADMIN_DESKTOP_MAINTENANCE_MODE_

AUDIT_FAIL ${UserDisplayName} failed to update

UPDATE_FAILED

ADMIN_DESKTOP_MAINTENANCE_MODE_

AUDIT_SUCCESS ${UserDisplayName} updated desktop

UPDATED

ADMIN_DESKTOP_UNASSIGN AUDIT_SUCCESS ${UserDisplayName} removed assignment

ADMIN_DESKTOP_UNASSIGN_FAILED AUDIT_FAIL ${UserDisplayName} failed to remove

ADMIN_ENABLE_DESKTOP_FAILED AUDIT_FAIL ${UserDisplayName} failed to set Pool

ADMIN_ENABLE_DESKTOP_SUCCEEDED AUDIT_SUCCESS ${UserDisplayName} set Pool ${DesktopId}

ADMIN_ENABLED_DESKTOP_PROVISION_

AUDIT_FAIL ${UserDisplayName} failed to set

FAI LED

ADMIN_ENABLED_DESKTOP_PROVISION_

AUDIT_SUCCESS ${UserDisplayName} set provisioning for

SUCCEEDED

ADMIN_EVENT_CONFIGURATION_UPDATE_

AUDIT_FAIL ${UserDisplayName} failed to update

FAI LED

ADMIN_EVENT_CONFIGURATION_UPDATED AUDIT_SUCCESS ${UserDisplayName} has updated global

ADMIN_FOLDER_ADD_FAILED AUDIT_FAIL ${UserDisplayName} failed to add folder

ADMIN_FOLDER_ADDED AUDIT_SUCCESS ${UserDisplayName} added folder

ADMIN_FOLDER_CHANGE_FAILED AUDIT_FAIL ${UserDisplayName} failed to change

ADMIN_FOLDER_CHANGED AUDIT_SUCCESS ${UserDisplayName} changed object

ADMIN_FOLDER_DELETE_FAILED AUDIT_FAIL ${UserDisplayName} failed to delete folder

ADMIN_FOLDER_DELETED AUDIT_SUCCESS ${UserDisplayName} deleted folder

ADMIN_GLOBAL_CONFIGURATION_

AUDIT_FAIL ${UserDisplayName} failed to update

UPDATE_FAILED

ADMIN_GLOBAL_CONFIGURATION_

AUDIT_SUCCESS ${UserDisplayName} updated global

UPDATED

${DesktopId}

${MachineName} to ${UserName}

Desktop ${MachineName} to ${UserName}

${DesktopId} (${AttrChangeType}: ${AttrName} = ${AttrValue})

desktop ${MachineName} to ${MaintenanceMode} maintenance mode

${MachineName} to ${MaintenanceMode} maintenance mode

for Desktop ${MachineName}

assignment for Desktop ${MachineName}

${DesktopId} to ${EnableStatus}

to ${EnableStatus}

provisioning for Pool ${DesktopId} to ${EnableStatus}

Pool ${DesktopId} to ${EnableStatus}

event configuration

configuration

${AdminFolderName}

object ${ObjectID}(type=${ObjectType}) to folder ${AdminFolderName}

${ObjectID}(type=${ObjectType}) to folder ${AdminFolderName}

${AdminFolderName}

global configuration

configuration (${AttrChangeType}: ${AttrName} = ${AttrValue})

VMware, Inc. 19

VMware View Integration

Tabl e 2-6. View Administrator Events (Continued)

EventType Severity ModuleAndEventText

ADMIN_GLOBAL_POLICY_UPDATE_FAILED AUDIT_FAIL ${UserDisplayName} failed to update

ADMIN_GLOBAL_POLICY_UPDATED AUDIT_SUCCESS ${UserDisplayName} updated global

ADMIN_LOCALMODE_INITIATE_ REPLICATION

ADMIN_LOCALMODE_LOCK_MACHINE INFO Lock Machine ${MachineName} on

ADMIN_LOCALMODE_LOCK_MACHINE_ FAI LED

ADMIN_LOCALMODE_ROLLBACK_DESKTOP INFO Machine ${MachineName} has been rolled

ADMIN_LOCALMODE_UNLOCK_MACHINE INFO Unlock Machine ${MachineName} on

ADMIN_LOCALMODE_UNLOCK_MACHINE_ FAI LED

ADMIN_PERFMON_CONFIGURATION_ UPDATE_FAILED

ADMIN_PERFMON_CONFIGURATION_ UPDATED

ADMIN_PERMISSION_ADD_FAILED AUDIT_FAIL ${UserDisplayName} failed to add

ADMIN_PERMISSION_ADDED AUDIT_SUCCESS ${UserDisplayName} added Permission to

ADMIN_PERMISSION_REMOVE_FAILED AUDIT_FAIL ${UserDisplayName} failed to remove

ADMIN_PERMISSION_REMOVED AUDIT_SUCCESS ${UserDisplayName} removed Permission

ADMIN_POOL_POLICY_UPDATE_FAILED AUDIT_FAIL ${UserDisplayName} failed to update Pool

ADMIN_POOL_POLICY_UPDATED AUDIT_SUCCESS ${UserDisplayName} updated Pool

ADMIN_PUBLISH_PACKAGE INFO Publish transfer package ${PackageName}

ADMIN_REMOVE_DESKTOP_ENTITLEMENT AUDIT_SUCCESS ${EntitlementDisplay} was unentitled from

ADMIN_REMOVE_DESKTOP_FAILED AUDIT_FAIL ${UserDisplayName} failed to removed

ADMIN_REMOVE_DESKTOP_SUCCEEDED AUDIT_SUCCESS ${UserDisplayName} removed Pool

ADMIN_REMOVE_THINAPP_ENTITLEMENT AUDIT_SUCCESS Application ${ThinAppDisplayName} was

global policies

policy (${AttrChangeType}: ${AttrName} = ${AttrValue})

INFO Inititate replication for Machine

${MachineName}

vCenter

WARNING Lock Machine ${MachineName} failed on

vCenter

back

vCenter

WARNING Unlock Machine ${MachineName} failed

on vCenter

AUDIT_FAIL ${UserDisplayName} failed to update

performance monitoring configuration

AUDIT_SUCCESS ${UserDisplayName} has updated

performance monitoring configuration

Permission to ${AdminPermissionEntity} with Role ${AdminRoleName} on Folder ${AdminFolderName}

${AdminPermissionEntity} with Role ${AdminRoleName} on Folder ${AdminFolderName}

Permission to ${AdminPermissionEntity} with Role ${AdminRoleName} on Folder ${AdminFolderName}

to ${AdminPermissionEntity} with Role ${AdminRoleName} on Folder ${AdminFolderName}

${DesktopId} policies

${DesktopId} policy (${AttrChangeType}: ${AttrName} = ${AttrValue})

Pool ${DesktopId} by ${UserDisplayName}

Pool ${DesktopId}

${DesktopId}

unassigned from Desktop ${MachineName} by ${UserDisplayName}

20 VMware, Inc.

Chapter 2 Integrating with the Event Database

Tabl e 2-6. View Administrator Events (Continued)

EventType Severity ModuleAndEventText

ADMIN_REMOVE_THINAPP_ENTITLEMENT_ FAI LED

ADMIN_REMOVE_THINAPP_POOL_ ENTITLEMENT

ADMIN_RESET_THINAPP_STATE AUDIT_SUCCESS Application ${ThinAppDisplayName}

ADMIN_RESET_THINAPP_STATE_FAILED AUDIT_FAIL ${UserDisplayName} failed to reset

ADMIN_ROLE_ADD_FAILED AUDIT_FAIL ${UserDisplayName} failed to add Role

ADMIN_ROLE_ADDED AUDIT_SUCCESS ${UserDisplayName} added Role

ADMIN_ROLE_PRIV_UPDATE_FAILED AUDIT_FAIL ${UserDisplayName} failed to update Role

ADMIN_ROLE_PRIV_UPDATED AUDIT_SUCCESS ${UserDisplayName} updated Role

ADMIN_ROLE_REMOVE_FAILED AUDIT_FAIL ${UserDisplayName} failed to remove Role

ADMIN_ROLE_REMOVED AUDIT_SUCCESS ${UserDisplayName} removed Role

ADMIN_ROLE_RENAME_FAILED AUDIT_FAIL ${UserDisplayName} failed to rename Role

ADMIN_ROLE_RENAMED AUDIT_SUCCESS ${UserDisplayName} renamed Role

ADMIN_SECURITY_SERVER_ADD_FAILED AUDIT_FAIL ${UserDisplayName} failed to add security

ADMIN_SECURITY_SERVER_ADDED AUDIT_SUCCESS ${UserDisplayName} added security server

ADMIN_SECURITY_SERVER_EDIT_FAILED AUDIT_FAIL ${UserDisplayName} failed to edit security

ADMIN_SECURITY_SERVER_EDITED AUDIT_SUCCESS ${UserDisplayName} edited security server

ADMIN_SECURITY_SERVER_REMOVE_FAILED AUDIT_FAIL ${UserDisplayName} failed to remove

ADMIN_SECURITY_SERVER_REMOVED AUDIT_SUCCESS ${UserDisplayName} removed security

ADMIN_SESSION_SENDMSG AUDIT_SUCCESS ${UserDisplayName} sent message

ADMIN_SESSION_SENDMSG_FAILED AUDIT_FAIL ${UserDisplayName} failed to send

AUDIT_FAIL ${UserDisplayName} failed to remove

Application entitlement

AUDIT_SUCCESS Application ${ThinAppDisplayName} was

unassigned from Pool ${DesktopId} by ${UserDisplayName}

state are reset for Desktop ${DesktopDisplayName} by ${UserDisplayName}

Application state for ${ThinAppDisplayName}

${AdminRoleName} with privileges ${AdminPrivilegeName}

${AdminRoleName} to privileges ${AdminPrivilegeName}

${AdminRoleName}

${AdminRoleName} to ${AdminRoleNewName}

server ${SecurityServerId}

${SecurityServerId}

server ${SecurityServerId}

${SecurityServerId} (${AttrChangeType}: ${AttrName} = ${AttrValue})

security server ${SecurityServerId}

server ${SecurityServerId}

(${SessionMessage}) to session (User ${UserName}, Desktop ${MachineName})

message (${SessionMessage}) to session ${ObjectId}

VMware, Inc. 21

VMware View Integration

Tabl e 2-6. View Administrator Events (Continued)

EventType Severity ModuleAndEventText

ADMIN_SVI_ADD_DEPLOYMENT_GROUP_ FAI LED

ADMIN_SVI_ADD_DEPLOYMENT_GROUP_ SUCCEEDED

ADMIN_SVI_ADD_UDD_FAILED AUDIT_FAIL Failed to add user data disk

ADMIN_SVI_ADD_UDD_SUCCEEDED AUDIT_SUCCESS Added user data disk ${UserDiskName}

ADMIN_SVI_ADMIN_ADDED AUDIT_SUCCESS ${UserDisplayName} added SVI

ADMIN_SVI_ADMIN_REMOVED AUDIT_SUCCESS ${UserDisplayName} removed SVI

ADMIN_SVI_ADMIN_UPDATED AUDIT_SUCCESS ${UserDisplayName} updated SVI

ADMIN_SVI_ATTACH_UDD_FAILED AUDIT_FAIL Failed to request attach user data disk

ADMIN_SVI_ATTACH_UDD_SUCCEEDED AUDIT_SUCCESS Requested attach user data disk

ADMIN_SVI_DELETE_UDD_FAILED AUDIT_FAIL Failed to delete user data disk

ADMIN_SVI_DELETE_UDD_SUCCEEDED AUDIT_SUCCESS Deleted user data disk ${UserDiskName}

ADMIN_SVI_DETACH_UDD_FAILED AUDIT_FAIL Failed to request detach user data disk

ADMIN_SVI_DETACH_UDD_SUCCEEDED AUDIT_SUCCESS Requested detach user data disk

ADMIN_SVI_REBALANCE_VM_FAILED AUDIT_FAIL Failed to rebalance VM ${SVIVMID}

ADMIN_SVI_REBALANCE_VM_SUCCEEDED AUDIT_SUCCESS Rebalanced VM ${SVIVMID}

ADMIN_SVI_REFRESH_VM_FAILED AUDIT_FAIL Failed to refresh VM ${SVIVMID}

ADMIN_SVI_REFRESH_VM_SUCCEEDED AUDIT_SUCCESS Refreshed VM ${SVIVMID}

ADMIN_SVI_RESYNC_VM_FAILED AUDIT_FAIL Failed to resync VM ${SVIVMID} to

ADMIN_SVI_RESYNC_VM_SUCCEEDED AUDIT_SUCCESS Resyncd VM ${SVIVMID} to deployment

ADMIN_SVI_UPDATE_POOL_DEPLOYMENT_ GROUP_FAILED

ADMIN_SVI_UPDATE_POOL_DEPLOYMENT_ GROUP_SUCCEEDED

ADMIN_SVI_UPDATE_UDD_FAILED AUDIT_FAIL Failed to update user data disk

ADMIN_SVI_UPDATE_UDD_SUCCEEDED AUDIT_SUCCESS Set user data disk ${UserDiskName} pool

ADMIN_THINAPP_ADD_FAILED AUDIT_FAIL ${UserDisplayName} failed to add

ADMIN_THINAPP_ADDED AUDIT_SUCCESS ${UserDisplayName} added Application

AUDIT_FAIL Failed to add deployment group for

${SVIParentVM} : ${SVISnapshot}

AUDIT_SUCCESS Added deployment group

${SVIDeploymentGroupID} for ${SVIParentVM} : ${SVISnapshot}

${UserDiskName}

QuickPrep domain ${SVIAdminFqdn}(${SVIAdminName})

QuickPrep domain (id=${SVIAdminID})

QuickPrep domain ${SVIAdminFqdn}(${SVIAdminName})

${UserDiskName} to VM ${SVIVMID}

${UserDiskName}

${UserDiskName} from VM ${SVIVMID}

deployment group ${SVIDeploymentGroupID}

group ${SVIDeploymentGroupID}

AUDIT_FAIL Failed to update pool ${DesktopId} to

deployment group ${SVIDeploymentGroupID}

AUDIT_SUCCESS Updated pool ${DesktopId} to deployment

group ${SVIDeploymentGroupID}

${UserDiskName}

to ${DesktopId} and user to ${UserName}

Application ${ThinAppDisplayName}

${ThinAppDisplayName}

22 VMware, Inc.

Chapter 2 Integrating with the Event Database

Tabl e 2-6. View Administrator Events (Continued)

EventType Severity ModuleAndEventText

ADMIN_THINAPP_DESKTOP_AVAILABLE AUDIT_SUCCESS Application ${ThinAppDisplayName} is

ADMIN_THINAPP_DESKTOP_REMOVED AUDIT_SUCCESS Application ${ThinAppDisplayName} has

ADMIN_THINAPP_EDITED AUDIT_SUCCESS ${UserDisplayName} edited Application

ADMIN_THINAPP_FAILED_DESKTOP_

AUDIT_FAIL Failed to deliver Application

DELIVERY

ADMIN_THINAPP_FAILED_DESKTOP_

AUDIT_FAIL Failed to remove Application

REMOVAL

ADMIN_THINAPP_GROUP_ADD_FAILED AUDIT_FAIL ${UserDisplayName} failed to add

ADMIN_THINAPP_GROUP_ADDED AUDIT_SUCCESS ${UserDisplayName} added Application

ADMIN_THINAPP_GROUP_EDIT_FAILED AUDIT_FAIL ${UserDisplayName} failed to edit

ADMIN_THINAPP_GROUP_EDITED AUDIT_SUCCESS ${UserDisplayName} edited Application

ADMIN_THINAPP_GROUP_REMOVE_FAILED AUDIT_FAIL ${UserDisplayName} failed to remove

ADMIN_THINAPP_GROUP_REMOVED AUDIT_SUCCESS ${UserDisplayName} removed Application

ADMIN_THINAPP_REMOVE_FAILED AUDIT_FAIL ${UserDisplayName} failed to remove

ADMIN_THINAPP_REMOVED AUDIT_SUCCESS ${UserDisplayName} removed Application

ADMIN_THINAPP_REPO_ADD_FAILED AUDIT_FAIL ${UserDisplayName} failed to add

ADMIN_THINAPP_REPO_ADDED AUDIT_SUCCESS ${UserDisplayName} added Repository

ADMIN_THINAPP_REPO_EDIT_FAILED AUDIT_FAIL ${UserDisplayName} failed to edit

ADMIN_THINAPP_REPO_EDITED AUDIT_SUCCESS ${UserDisplayName} edited Repository

ADMIN_THINAPP_REPO_REMOVED AUDIT_SUCCESS ${UserDisplayName} removed Repository

ADMIN_TRANSFER_SERVER_ADDED AUDIT_SUCCESS ${UserDisplayName} added transfer server

now available on Desktop ${DesktopDisplayName}

been removed from Desktop ${DesktopDisplayName}

${ThinAppDisplayName}

${ThinAppDisplayName} to Desktop ${DesktopDisplayName}

${ThinAppDisplayName} from Desktop ${DesktopDisplayName}

Application Template ${ThinAppGroupName}

Template ${ThinAppGroupName} with Applications ${ThinAppGroupApplications}

Application Template ${ThinAppGroupName}

Template ${ThinAppGroupName} with Applications ${ThinAppGroupApplications}

Application Template ${ThinAppGroupName}

Template ${ThinAppGroupName}

Application ${ThinAppDisplayName}

${ThinAppDisplayName}

Repository ${ThinAppRepositoryName}, path ${ThinAppRepositoryPath}

${ThinAppRepositoryName}, path ${ThinAppRepositoryPath}

Repository ${ThinAppRepositoryName}, path ${ThinAppRepositoryPath}

${ThinAppRepositoryName}, path ${ThinAppRepositoryPath}

${ThinAppRepositoryName}

${TransferServerDisplay}

VMware, Inc. 23

VMware View Integration

Tabl e 2-6. View Administrator Events (Continued)

EventType Severity ModuleAndEventText

ADMIN_TRANSFER_SERVER_ENTER_ MAINTENANCE

ADMIN_TRANSFER_SERVER_EXIT_ MAINTENANCE

ADMIN_TRANSFER_SERVER_REMOVED AUDIT_SUCCESS ${UserDisplayName} removed transfer

ADMIN_UNREGISTER_PM AUDIT_SUCCESS ${UserDisplayName} unregistered

ADMIN_UNREGISTER_PM_FAILED AUDIT_FAIL ${UserDisplayName} fails to unregister

ADMIN_USER_INFO_UPDATE_FAILED AUDIT_FAIL ${UserDisplayName} failed to update user

ADMIN_USER_INFO_UPDATED AUDIT_SUCCESS ${UserDisplayName} updated user info

ADMIN_USER_POLICY_DELETE_FAILED AUDIT_FAIL ${UserDisplayName} failed to delete Pool

ADMIN_USER_POLICY_DELETED AUDIT_SUCCESS ${UserDisplayName} deleted Pool

ADMIN_USER_POLICY_UPDATE_FAILED AUDIT_FAIL ${UserDisplayName} failed to update Pool

ADMIN_USER_POLICY_UPDATED AUDIT_SUCCESS ${UserDisplayName} updated Pool

ADMIN_USERLOGGEDIN AUDIT_SUCCESS User ${UserDisplayName} has logged in to

ADMIN_USERLOGGEDOUT AUDIT_SUCCESS User ${UserDisplayName} has logged out

ADMIN_VC_ADD_FAILED AUDIT_FAIL ${UserDisplayName} failed to add VC

ADMIN_VC_ADDED AUDIT_SUCCESS ${UserDisplayName} added VC server

ADMIN_VC_EDITED AUDIT_SUCCESS ${UserDisplayName} edited VC server

ADMIN_VC_LICINV_ALARM_DISABLED AUDIT_SUCCESS Alarm on VC server ${VCAddress} for

ADMIN_VC_REMOVE_FAILED AUDIT_FAIL ${UserDisplayName} failed to remove VC

ADMIN_VC_REMOVED AUDIT_SUCCESS ${UserDisplayName} removed VC server

AUDIT_SUCCESS Transfer server ${TransferServerDisplay}

enters maintenance mode

AUDIT_SUCCESS Transfer server ${TransferServerDisplay}

exits maintenance mode

server ${TransferServerDisplay}

physical machine ${MachineName})

info with AD server for ${UserName}

with AD server for ${UserName}

${DesktopId} override policies for user ${UserName}

${DesktopId} override policy for user ${UserName} (${AttrChangeType}: ${AttrName} = ${AttrValue})

${DesktopId} policies for user ${UserName}

${DesktopId} policy for user ${UserName} (${AttrChangeType}: ${AttrName} = ${AttrValue})

View Administrator

from View Administrator

server ${VCAddress}

${VCAddress}

${VCAddress} (${AttrChangeType}: ${AttrName} = ${AttrValue})

License Inventory monitoring was disabled as all Hosts have desktop licenses

server ${VCAddress}

${VCAddress}

24 VMware, Inc.

+ 56 hidden pages

VMware View - 5.0 User Manual

Contents

Intended Audience

VMware Technical Publications Glossary

Document Feedback

Technical Support and Education Resources

Online and Telephone Support

Support Offerings

VMware Professional Services

Introduction

VMware View Components

Integration Interfaces to VMware View

Integrating with the Event Database

Event Database Tables and Schemas

Connection Broker Events

View Agent Events

View Administrator Events